Abstract
This paper presented a numerical approach to solving the problem of a flat-ended punch in contact with a half-space matrix embedded with multiple three dimensional arbitrary-shaped inhomogeneities. Based on the semi-analytical method (SAM) and the equivalent inclusion method, numerical procedures were developed and the effects of inclusion shape and distribution were analyzed. Fast Fourier transform technique was implemented to accelerate the calculation of surface deformation and subsurface stress. Interactions of inter-inclusions and inclusion-matrix were taken into account. Numerical results showed the presence of inhomogeneities (i.e., microstructures in solids) indeed had a great effect on local contact pressure and a strong disturbance to the subsurface stress field in the vicinity of inclusions. The effects were dependent on the shape and distribution of inclusions and inter-inclusion interactions. The physical significance of this study is to provide an insight into the relation between the material microstructure and its response to the external load, and the solution approach and procedures may find useful applications, for example, the analysis of fatigue and crack propagation for composite materials, prediction of stress field in solids containing material defects, and study of the mechanism of chemical-mechanical polish (CMP) for inhomogeneous materials, etc.
Similar content being viewed by others
References
Murakami Y, Endo M. Effects of defects, inclusions and inhomogeneities on fatigue strength. Int J Fatig, 1994, 116: 163–182
Edwards R H. Stress concentrations around spheroidal inclusions and cavities. J Appl Mech, 1951, 18: 19–30
Eshelby J D. The determination of the elastic field of an ellipsoidal inclusion and related problems. P Roy Soc Lond Ser A, 1957, 241: 376–396
Eshelby J D. The elastic field outside an elastic inclusion. P Roy Soc Lond Ser A, 1959, 252: 561–569
Eshelby J D. Elastic inclusions and inhomogeneities. In: Progress in solid mechanics. Amsterdam: North-Holland, 1961. 89-140
Chiu Y P. On the stress field due to initial strains in a cuboid surrounded by an infinite elastic space. J Appl Mech, 1977, 44: 587–590
Chiu Y P. On the stress field and surface deformation in a half-space with a cuboidal zone in which initial strains are uniform. J Appl Mech, 1978, 45: 302–306
Mura T. Micromechanics of Defects in Solids. Netherlands: Martinus Nijhoff Publishers, 1987. 74-123
Mindlin R D, Cheng D H. Thermoelastic stress in the semi-infinite solid. J Appl Phys, 1950, 21: 931–933
Seo K, Mura T. The elastic field in a half space due to ellipsoidal inclusions with uniform dilatational eigenstrains. J Appl Mech, 1979, 46: 568–572
Wu L, Du S. The elastic field caused by a circular cylindrical inclusion-part I: Inside the region x 1 2+x 2 2<a 2, −∞<x 3<∞, where the circular cylindrical inclusion is expressed by x 1 2+x 2 2 ⩽a 2, −h⩽x 3⩽h. J Appl Mech, 1995, 62: 579–584
Wu L, Du S. The elastic field caused by a circular cylindrical inclusion-part II: Inside the region x 1 2+x 2 2<a 2, −∞<x 3<∞, where the circular cylindrical inclusion is expressed by x 1 2+x 2 2 ⩽a 2, −h⩽x 3⩽h. J Appl Mech, 1995, 62: 585–589
Miller G R, Keer L M. Interaction between a rigid indenter and a near-surface void or inclusion. J Appl Mech, 1983, 50: 615–620
Kuo C H. Stress disturbances caused by the inhomogeneity in an elastic half-space subjected to contact loading. Int J Solids Struct, 2007, 44: 860–873
Kuo C H. Contact stress analysis of an elastic half-plane containing multiple inclusions. Int J Solids Struct, 2008, 45: 4562–4573
Zhou K, Chen W W, Keer L M, et al. A fast method for solving three-dimensional arbitrarily shaped inclusions in a half-space. Comput Methods Appl Mech Eng, 2009, 198: 885–892
Zhou K, Chen W W, Keer L M, et al. Multiple 3D inhomogeneous inclusions in a half space under contact loading. Mech Mater, 2011, 2: 1–14
Leroux J, Fulleringer B, Nélias D. Contact analysis in presence of spherical inhomogeneities within a half-space. Int J Solids Struct, 2010, 47: 3034–3049
Greenwood J A, Williamson J B P. Contact of nominally flat surfaces. P Roy Soc Lond Ser A, 1966, 295: 300–319
Chang W R, Etsion I, Bogy D B. An elastic-plastic model for the contact of rough surfaces. ASME J Tribol, 1987, 109: 257–263
Chen W W, Wang Q J, Liu Y, et al. Analysis and convenient formulas for elasto-plastic contacts of nominally flat surfaces: Average gap, contact area ratio, and plastically deformed volume. Tribol Lett, 2007, 28: 27–38
Chen W W, Liu S B, Wang Q J. Fast fourier transform based numerical methods for elasto-plastic contacts of nominally flat surfaces. J Appl Mech, 2008, 75: 011022
Choi H J, Paulino G H. Interfacial cracking in a graded coating/ substrate system loaded by a frictional sliding flat punch. P Roy Soc Ser A, 2010, 466: 853–880
Johnson K L. Contact Mechanics. Cambridge: Cambridge University Press, 1985. 53–55
Nogi T, Kato T. Influence of a hard surface layer on the limit of elastic contact-part I: Analysis using a real surface model. ASME J Tribol, 1997, 119: 493–500
Hu Y Z, Barber G C, Zhu D. Numerical analysis for the elastic contact of real rough surfaces. Tribol Trans, 1999, 42: 443–452
Polonsky I A, Keer L M. A numerical method for solving rough contact problems based on the multi-level multi-summation and conjugate gradient techniques. Wear, 1999, 231: 206–219
Liu S B, Wang Q, Liu G. A versatile method of discrete convolution and FFT (DC-FFT) for contact analysis. Wear, 2000, 243: 101–111
Jacq C, Nélias D, Lormand G, et al. Development of a three-dimen-sional semi-analytical elastic-plastic contact code. ASME J Tribol, 2002, 124: 653–667
Liu S B, Wang Q. Elastic fields due to eigenstrains in a half-space. J Appl Mech, 2005, 72: 871–878
Wang Z J, Wang W Z, Hu Y Z, et al. A numerical elastic-plastic contact model for rough surfaces. Tribol Trans, 2010, 53: 224–238
Zhou K, Keer L M, Wang Q J. Semi-analytic solution for multiple interacting three-dimensional inhomogeneous inclusions of arbitrary shape in an infinite space. Int J Numer Methods Eng, 2011, 87(7): 617–638
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, L., Wang, W., Wang, Z. et al. Numerical study of contacts between a flat-ended punch and a half-space embedded with inhomogeneities. Sci. China Phys. Mech. Astron. 57, 684–697 (2014). https://doi.org/10.1007/s11433-013-5229-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11433-013-5229-8