Abstract
Experiments on beam loss by using beam loss monitoring (BLM) system were carried out at Shanghai Synchrotron Radiation Facility (SSRF) injector. This system used highly sensitive and current-integrated Si-photodiode detectors and an Ethernet data acquisition (DAQ) system. The experimental results demonstrate that the Si-photodiode detectors are a useful tool that provides dynamic information on beam loss and investigates problems of machine operation. It also shows that the Si-photodiode BLM system is suitable for pulse-radiation of high-energy accelerators.
Similar content being viewed by others
References
Max F, Daryl R. The SLAC long ion chamber system for machine protection. IEEE Trans Nucl Sci, 1967, 14: 1096–1098
Parker J R, Richardson J H, Oetting J D, et al. A beam-spill monitor for LAMPF. IEEE Trans Nucl Sci, 1971, 18: 825–826
Wittenburg K. The pin-diode beam loss monitor system at HERA. In: Proceedings of AIP 2000 Conference, 2000, 546: 3–22
Xu H J, Zhao Z T. Current status and progresses of SSRF project. Nucl Sci Tech, 2008, 19: 1–6
Zeng M, Li Y X, Gong G H, et al. Prototype of linac BLM at NSRL. Nucl Instrum Methods Phys Res Sect A, 2007, 579: 526–529
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cai, J., Xia, X., Xu, X. et al. Monitoring system experiments on beam loss at SSRF injector. Sci. China Phys. Mech. Astron. 54 (Suppl 2), 279–282 (2011). https://doi.org/10.1007/s11433-011-4520-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11433-011-4520-9