Abstract
The squirrel-cage elastic support is one of the most important components of an aero-engine rotor system. A proper structural design will favor the static and dynamic performances of the system. In view of the deficiency of the current shape optimization techniques, a new mapping approach is proposed to define shape design variables based on the parametric equations of 3D curves and surfaces. It is then applied for the slot shape optimization of a squirrel-cage elastic support. To this end, an automatic design procedure that integrates the Genetic Algorithm (GA) is developed to solve the problem. Two typical examples with different shape constraints are considered. Numerical results provide reasonable optimum designs for the improvement of stiffness and strength of the squirrel-cage elastic support.
Similar content being viewed by others
References
Fu C G, Zheng D P, Ou Y X. Design manual of aero-engine: Rotor dynamics and body vibration, V19 (in Chinese). Beijing: Aviation Industry Press, 2000
Chen G. Structure analysis design of aero-engine(in Chinese). Beijing: Beijing University of Aeronautics and Astronautics Press, 2006
Zhang W H, Beckers P, Fleury C. A unified parametric design approach to structural shape optimization. Int J Numer Methods Eng, 1995, 38: 2283–2292
Haftka R T, Grandhi R V. Structural shape optimization-a survey. Comput Methods Appl Mech Eng, 1986, 57: 91–106
Samareh J A. Survey of shape parameterization techniques for high-fidelity multidisciplinary shape optimization. AIAA J, 2001, 39: 877–884
Zhang W H, Beckers P. Comparison of different sensitivity analysis approaches for structural shape optimization. Computer Aided Optimum Design of Structures: Recent Advances. Berlin: Springer, 1989. 20–23: 347–356
Zhang S, Belegundu A D. A systematic approach for generating velocity fields in shape optimization. Struct Optim, 1992, 5: 84–94
Choi K K, Chang K H. A study of design velocity field computation for shape optimal design. Finite Elem Anal Des, 1994, 15: 317–341
Jang G W, Kim Y Y. Sensitivity analysis for fixed-grid shape optimization by using oblique boundary curve approximation. Int J Solids Struct, 2005, 42: 3591–3609
Yang B S, Choi S P, Kim Y C. Vibration reduction optimum design of a steam-turbine rotor-bearing system using a hybrid genetic algorithm. Struct Multidiscip Optim, 2005, 30: 43–53
George B, Prasad N S. Finite element analysis of squirrel cage ball bearings for gas turbine engines. Def Sci J, 2007, 57: 165–171
Mitchell M. An introduction to genetic algorithms. Cambridge: MIT Press, 1998
Shi F Z. Computer-aided geometric design and NURBS(in Chinese). Beijing: Higher Education Press, 2001
Deb K. An efficient constraint handling method for genetic algorithms. Comput Methods Appl Mech Eng, 2000, 186: 311–337
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, D., Zhang, W., Wang, Z. et al. Shape optimization of 3D curved slots and its application to the squirrel-cage elastic support design. Sci. China Phys. Mech. Astron. 53, 1895–1900 (2010). https://doi.org/10.1007/s11433-010-4093-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11433-010-4093-z