Skip to main content
SpringerLink
Log in

A novel hydrodynamic suspension micropump using centrifugal pressurization and the wedge effect

  • Article
  • Published:
Science China Technological Sciences Aims and scope Submit manuscript

Abstract

The micropump is the heart of microfluidics systems. However, for mechanical micropumps, bearing wear failure has been a major obstacle to performance and reliability. Hydrodynamic suspension, which can make the rotating components levitate in liquid without any mechanical friction, is applied to break this bottleneck. In this paper, a novel kind of hydrodynamic suspension micropump (HSMP) without a grooved thrust bearing is proposed. Based on the centrifugal effect, the HSMP uses a rotating rotor to accelerate and pressurize adjacent fluid, and thus reacting forces are generated on the rotor surfaces to levitate it. The mechanisms of suspension forces formation, the centrifugal effect and the wedge effect in the liquid films near the rotor are identified using theoretical analysis and simulation. The variation in suspension forces with rotor position is investigated, revealing that the suspension bearings of the HSMP, similar to a spring damper, can self-adjust suspension forces along with a change in rotor position. Moreover, the suspension stiffness is positively correlated with the rotating speed. The HSMP prototype designed herein, whose overall size is only 34 mm × 34 mm × 31 mm, can provide a maximum output performance of 3230 mL/min and 96.3 kPa at 20000 r/min, which is manyfold greater than other micropumps. The proposed HSMP is demonstrated to be more powerful with a simple structure, high power density, and high reliability.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Mohith S, Karanth P N, Kulkarni S M. Recent trends in mechanical micropumps and their applications: A review. Mechatronics, 2019, 60: 34–55

    Article  Google Scholar 

  2. Han D, Gu H, Kim J, et al. A bio-inspired 3D-printed hybrid finger with integrated ECF (electro-conjugate fluid) micropumps. Sens Actuat A-Phys, 2017, 257: 47–57

    Article  Google Scholar 

  3. Mi S, Pu H, Xia S, et al. A minimized valveless electromagnetic micropump for microfluidic actuation on organ chips. Sens Actuat A-Phys, 2020, 301: 111704

    Article  Google Scholar 

  4. Mao Z, Yoshida K, Kim J. Active sorting of droplets by using an ECF (Electro-conjugate Fluid) micropump. Sens Actuat A-Phys, 2020, 303: 111702

    Article  Google Scholar 

  5. Wang Y N, Fu L M. Micropumps and biomedical applications—A review. MicroElectron Eng, 2018, 195: 121–138

    Article  Google Scholar 

  6. Song P, Kuang S, Panwar N, et al. A self-powered implantable drug-delivery system using biokinetic energy. Adv Mater, 2017, 29: 1605668

    Article  Google Scholar 

  7. Akyazi T, Gil-González N, Basabe-Desmonts L, et al. Manipulation of fluid flow direction in microfluidic paper-based analytical devices with an ionogel negative passive pump. Sens Actuat B-Chem, 2017, 247: 114–123

    Article  Google Scholar 

  8. Zhao B, Cui X, Ren W, et al. A controllable and integrated pump-enabled microfluidic chip and its application in droplets generating. Sci Rep, 2017, 7: 11319

    Article  Google Scholar 

  9. Cheng S, Olles M W, Burger A F, et al. Optimization of a hybrid magnetic bearing for a magnetically levitated blood pump via 3-D FEA. Mechatronics, 2011, 21: 1163–1169

    Article  Google Scholar 

  10. Smakulski P, Pietrowicz S. A review of the capabilities of high heat flux removal by porous materials, microchannels and spray cooling techniques. Appl Thermal Eng, 2016, 104: 636–646

    Article  Google Scholar 

  11. Wu R, Fan Y, Hong T, et al. An immersed jet array impingement cooling device with distributed returns for direct body liquid cooling of high power electronics. Appl Thermal Eng, 2019, 162: 114259

    Article  Google Scholar 

  12. Hetsroni G, Gurevich M, Rozenblit R. Sintered porous medium heat sink for cooling of high-power mini-devices. Int J Heat Fluid Flow, 2006, 27: 259–266

    Article  Google Scholar 

  13. Laser D J, Santiago J G. A review of micropumps. J Micromech Microeng, 2004, 14: R35–R64

    Article  Google Scholar 

  14. Li H, Liu J, Li K, et al. A review of recent studies on piezoelectric pumps and their applications. Mech Syst Signal Process, 2021, 151: 107393

    Article  Google Scholar 

  15. Zhang J J, Chen Y W, Liu Y, et al. Experimental investigation on heat transfer characteristics of microcapsule phase change material suspension in array jet impingement. Sci China Tech Sci, 2022, 65: 1634–1645

    Article  Google Scholar 

  16. Rife J C, Bell M I, Horwitz J S, et al. Miniature valveless ultrasonic pumps and mixers. Sens Actuat A-Phys, 2000, 86: 135–140

    Article  Google Scholar 

  17. Yun H, Kong D, Aoyagi M. Characteristics of thickness-vibration-mode PZT transducer for acoustic micropumps. Sens Actuat A-Phys, 2021, 332: 113206

    Article  Google Scholar 

  18. Lee G H, Kim H R. Design analysis of DC electromagnetic pump for liquid sodium–CO2 reaction experimental characterization. Ann Nucl Energy, 2017, 109: 490–497

    Article  Google Scholar 

  19. Sedky M, Serry M. High efficiency 3D printed electromagnetic micropump with a synchronous active valve. Sens Actuat A-Phys, 2022, 341: 113570

    Article  Google Scholar 

  20. Li X, Liu S, Fan P, et al. A bubble-assisted electroosmotic micropump for a delivery of a droplet in a microfluidic channel combined with a light-addressable potentiometric sensor. Sens Actuat B-Chem, 2017, 248: 993–997

    Article  Google Scholar 

  21. Ai Y, Yalcin S E, Gu D, et al. A low-voltage nano-porous electroosmotic pump. J Colloid Interface Sci, 2010, 350: 465–470

    Article  Google Scholar 

  22. Ha S M, Cho W, Ahn Y. Disposable thermo-pneumatic micropump for bio lab-on-a-chip application. MicroElectron Eng, 2009, 86: 1337–1339

    Article  Google Scholar 

  23. Mucchi E, Rivola A, Dalpiaz G. Modelling dynamic behaviour and noise generation in gear pumps: Procedure and validation. Appl Acoustics, 2014, 77: 99–111

    Article  MATH  Google Scholar 

  24. Nath A G, Sarath Krishnan E, Cheriyan S, et al. Design and manufacture of miniature hydraulic gear pump for bio-medical application. Mater Today-Proc, 2018, 5: 25570–25580

    Article  Google Scholar 

  25. Tran C D, Pham P H, Nguyen T K, et al. A new structure of Tesla coupled nozzle in synthetic jet micro-pump. Sens Actuat A-Phys, 2020, 315: 112296

    Article  Google Scholar 

  26. Huang Y, Zhang J H, Hu X Q, et al. Dynamics analysis and experiment on the fishtailing type of valveless piezoelectric pump with rectangular vibrator. Sci China Tech Sci, 2010, 53: 3241–3247

    Article  MATH  Google Scholar 

  27. Duan B, Luo M, Yuan C, et al. Multi-objective hydraulic optimization and analysis in a minipump. Sci Bull, 2015, 60: 1517–1526

    Article  Google Scholar 

  28. Wang J, Chen Z, Yang S, et al. Geometric design and analysis of a novel sliding vane vacuum pump with three chambers. Mechanism Machine Theor, 2019, 141: 52–66

    Article  Google Scholar 

  29. Luo X W, Zhu L, Zhuang B T, et al. A novel shaft-less double suction mini pump. Sci China Ser E-Technol Sci, 2010, 53: 105–110

    Article  Google Scholar 

  30. Wu R, Lan W, Yu X, et al. Numerical study of the flow condition of the hydrodynamic levitated mechanical micropump. In: ASME 2018 International Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Microsystems. San Francisco: ASME, 2018

    Google Scholar 

  31. Zhang J, Zhu H, Yang C, et al. Multi-objective shape optimization of helico-axial multiphase pump impeller based on NSGA-II and ANN. Energy Convers Manage, 2011, 52: 538–546

    Article  Google Scholar 

  32. Pei Y, Liu Q, Wang C, et al. Energy efficiency prediction model and energy characteristics of subsea disc pump based on velocity slip and similarity theory. Energy, 2021, 229: 120690

    Article  Google Scholar 

  33. Kimman M H, Langen H H, Munnig Schmidt R H. A miniature milling spindle with active magnetic bearings. Mechatronics, 2010, 20: 224–235

    Article  Google Scholar 

  34. Pai C N, Shinshi T, Shimokohbe A. Sensorless measurement of pulsatile flow rate using a disturbance force observer in a magnetically levitated centrifugal blood pump during ventricular assistance. Flow Measurement Instrumentation, 2010, 21: 33–39

    Article  Google Scholar 

  35. Zhu H, Gu Z. Active disturbance rejection control of 5-degree-of-freedom bearingless permanent magnet synchronous motor based on fuzzy neural network inverse system. ISA Trans, 2020, 101: 295–308

    Article  Google Scholar 

  36. Micha P T, Mohan T, Sivamani S. Design and analysis of a permanent magnetic bearing for vertical axis small wind turbine. Energy Procedia, 2017, 117: 291–298

    Article  Google Scholar 

  37. Guan Y, Liu S, Li H. Study on magnetic bearings system in axial-flow blood pump. In: 2010 International Conference on Mechanic Automation and Control Engineering. Wuhan: IEEE, 2010. 3903–3907

    Chapter  Google Scholar 

  38. Yang S M, Ming-Shi Huang. Design and implementation of a magnetically levitated single-axis controlled axial blood pump. IEEE Trans Ind Electron, 2009, 56: 2213–2219

    Article  Google Scholar 

  39. Lin X, Wang R, Zhang S, et al. Study on dynamic characteristics for high speed water-lubricated spiral groove thrust bearing considering cavitating effect. Tribol Int, 2020, 143: 106022

    Article  Google Scholar 

  40. Wu R, Duan B, Liu F, et al. Design of a hydro-dynamically levitated centrifugal micro-pump for the active liquid cooling system. In: 2017 18th International Conference on Electronic Packaging Technology. Harbin: IEEE, 2017. 402–406

    Google Scholar 

  41. Yu Y, Pu G, Jiang T, et al. Discontinuous grooves in thrust air bearings designed with CAPSO algorithm. Int J Mech Sci, 2020, 165: 105197

    Article  Google Scholar 

  42. Xiang G, Han Y, Chen R, et al. A hydrodynamic lubrication model and comparative analysis for coupled microgroove journal-thrust bearings lubricated with water. Proc Institution Mech Engineers Part J-J Eng Tribol, 2020, 234: 1755–1770

    Article  Google Scholar 

  43. Luo X, Liu F, Duan B, et al. Micro hydraulic suspension mechanical pump. US Patent, US 10495093B2, 2019-12-03

  44. Xiang G, Wang J, Han Y, et al. Investigation on the nonlinear dynamic behaviors of water-lubricated bearings considering mixed thermoelastohydrodynamic performances. Mech Syst Signal Processing, 2022, 169: 108627

    Article  Google Scholar 

  45. Han Q, Ruan X, Chen W, et al. Numerical simulation and experimental research on passive hydrodynamic bearing in a blood pump. Chin J Mech Eng, 2013, 26: 967–973

    Article  Google Scholar 

  46. van Buuren S W, Hetzler H, Hinterkausen M, et al. Novel approach to solve the dynamical porous journal bearing problem. Tribol Int, 2012, 46: 30–40

    Article  Google Scholar 

  47. Xie Z L, Jiao J, Yang K, et al. Investigation on the stability and anti-eccentric load margin of a novel structure bearing lubricated by low viscosity medium. Sci China Tech Sci, 2022, 65: 1613–1633

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, 430074, China

    GuanYing Xing, Song Xue, Tao Hong, HuaiYu Zuo & XiaoBing Luo

Authors
  1. GuanYing Xing
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Song Xue
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Tao Hong
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. HuaiYu Zuo
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. XiaoBing Luo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to XiaoBing Luo.

Additional information

This work was supported by the Open Fund of Science and Technology on Thermal Energy and Power Laboratory (Grant No. TPL2019B03).

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Xing, G., Xue, S., Hong, T. et al. A novel hydrodynamic suspension micropump using centrifugal pressurization and the wedge effect. Sci. China Technol. Sci. 66, 2047–2058 (2023). https://doi.org/10.1007/s11431-022-2306-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-022-2306-9

Search

Navigation