Abstract
The high-temperature superconducting (HTS) bulk has a higher critical current density and can trap the larger magnetic field. When the high-temperature superconducting bulk is magnetized by the pulsed-field, it will be subjected to electromagnetic stress and thermal stress. Furthermore, the bulk may be damaged under larger mechanical stress or strain during the pulsed-field magnetization. In this paper, the electromagnetic field, the temperature and the mechanical response of the ring-shaped bulk are simulated based on the electromagnetic and mechanical governing equations, and the simulated trapped field is consistent with the experimental results given in the reference. The stress distribution on the top surface of the ring-shaped bulk during pulsed-field magnetization is opposite to the case of field cold magnetization. Moreover, the inner edge on the middle plane of the bulk may be broken more easily than the outer edge during the pulsed-field magnetization. Afterward, the influences of the size of the inner radius, ambient temperature and rise time of the applied field are presented. Finally, the mechanical stress of the bulk with the cooling process is investigated, and the tensile stress on the surface can be enhanced by the cooling process.
Similar content being viewed by others
References
Murakami M. Processing and applications of bulk RE-Ba-Cu-O superconductors. Int J Appl Ceramic Tech, 2007, 4: 225–241
Hull J R, Murakami M. Applications of bulk high-temperature superconductors. Proc IEEE, 2004, 92: 1705–1718
Zou J, Ainslie M D, Fujishiro H, et al. Numerical modelling and comparison of MgB2 bulks fabricated by HIP and infiltration growth. Supercond Sci Technol, 2015, 28: 075009
Yokoyama K, Oka T, Okada H, et al. Solid-liquid magnetic separation using bulk superconducting magnets. IEEE Trans Appl Supercond, 2003, 13: 1592–1595
Ainslie M, Fujishiro H. Numerical Modelling of Bulk Superconductor Magnetisation. Bristol: IOP Publishing. 2019
Ainslie M D, Fujishiro H, Ujiie T, et al. Modelling and comparison of trapped fields in (RE)BCO bulk superconductors for activation using pulsed field magnetization. Supercond Sci Technol, 2014, 27: 065008
Ainslie M D, Fujishiro H. Modelling of bulk superconductor magnetization. Supercond Sci Technol, 2015, 28: 053002
Ainslie M D, Fujishiro H, Mochizuki H, et al. Enhanced trapped field performance of bulk high-temperature superconductors using split coil, pulsed field magnetization with an iron yoke. Supercond Sci Technol, 2016, 29: 074003
Zhou D, Shi Y, Dennis A R, et al. Flux jumps in ring-shaped and assembled bulk superconductors during pulsed field magnetization. Supercond Sci Technol, 2020, 33: 034001
Zhou D, Ainslie M D, Srpčič J, et al. Exploiting flux jumps for pulsed field magnetisation. Supercond Sci Technol, 2018, 31: 105005
Durrell J H, Dennis A R, Jaroszynski J, et al. A trapped field of 17.6 T in melt-processed, bulk Gd-Ba-Cu-O reinforced with shrink-fit steel. Supercond Sci Technol, 2014, 27: 082001
Zou S, Zermeño V, Grilli F. Simulation of high temperature superconducting bulks magnetized by pulsed field magnetization with an electromagnetic-thermal coupled model. arXiv: 1511.00516
Ida T, Kimura Y, Sano T, et al. Trapped field measurements of Gd-Ba-Cu-O bulk superconductor in controlled pulse field magnetizing. J Phys-Conf Ser, 2008, 97: 012292
Ida T, Matsuzaki H, Akita Y, et al. Magnetization properties for Gd-Ba-Cu-O bulk superconductors with a couple of pulsed-field vortex-type coils. Physica C-Supercond, 2004, 412–414: 638–645
Fujishiro H, Naito T. Simulation of temperature and magnetic field distribution in superconducting bulk during pulsed field magnetization. Supercond Sci Technol, 2010, 23: 105021
Fujishiro H, Naito T, Oyama M. Mechanism of magnetic flux trapping on superconducting bulk magnetized by pulsed field using a vortex-type coil. Supercond Sci Technol, 2011, 24: 075015
Fujishiro H, Yokoyama K, Kaneyama M, et al. Estimation of generated heat in pulse field magnetizing for SmBaCuO bulk superconductor. Physica C-Supercond, 2004, 412–414: 646–650
Fujishiro H, Naito T, Yanagi Y, et al. Promising effects of a new hat structure and double metal ring for mechanical reinforcement of a REBaCuO ring-shaped bulk during field-cooled magnetisation at 10 T without fracture. Supercond Sci Technol, 2019, 32: 065001
Zhou D, Izumi M, Miki M, et al. An overview of rotating machine systems with high-temperature bulk superconductors. Supercond Sci Technol, 2012, 25: 103001
Zhou D, Ainslie M D, Shi Y, et al. A portable magnetic field of > 3 T generated by the flux jump assisted, pulsed field magnetization of bulk superconductors. Appl Phys Lett, 2017, 110: 062601
Ren Y, Weinstein R, Liu J, et al. Damage caused by magnetic pressure at high trapped field in quasi-permanent magnets composed of melt-textured YBaCuO superconductor. Physica C-Supercond, 1995, 251: 15–26
Namba S, Fujishiro H, Naito T, et al. Electromagnetic strain measurements and two-directional mechanical stress estimation for a REBaCuO ring bulk reinforced by a metal ring during field-cooled magnetization. Supercond Sci Technol, 2019, 32: 125011
Gruss S, Fuchs G, Krabbes G, et al. Superconducting bulk magnets: Very high trapped fields and cracking. Appl Phys Lett, 2001, 79: 3131–3133
Tomita M, Murakami M. High-temperature superconductor bulk magnets that can trap magnetic fields of over 17 tesla at 29 K. Nature, 2003, 421: 517–520
Huang C G, Zhou Y H. Mechanical improvement of metal reinforcement rings for a finite ring-shaped superconducting bulk. AIP Adv, 2018, 8: 035025
Ikuta H, Hirota N, Nakayama Y, et al. Giant magnetostriction in Bi2Sr2CaCu2O8 single crystal in the superconducting state and its mechanism. Phys Rev Lett, 1993, 70: 2166–2169
Liu Q F, Feng W J, Liu J Y. Flux-pinning-induced stress behaviors in a long superconducting slab with central cuboid hole. Acta Mech Sin, 2021, 37: 1255–1263
Zhang W, Xia J, Yong H, et al. Mechanical response induced by flux jump in a cylindrical superconductor. AIP Adv, 2020, 10: 025021
Yong H D, Zhou Y H. Kim model of stress induced by flux pinning in type-II superconductors. J Appl Phys, 2008, 103: 113903
Johansen T H, Wang C, Chen Q Y, et al. Enhancement of tensile stress near a hole in superconducting trapped-field magnets. J Appl Phys, 2000, 88: 2730–2733
Johansen T H. Flux-pinning-induced stress and strain in superconductors: Case of a long circular cylinder. Phys Rev B, 1999, 60: 9690–9703
Johansen T H. Flux-pinning-induced stress and strain in superconductors: Long rectangular slab. Phys Rev B, 1999, 59: 11187–11190
Huang C G, Yong H D, Zhou Y H. Magnetostrictive behaviors of type-II superconducting cylinders and rings with finite thickness. Supercond Sci Technol, 2013, 26: 105007
Ainslie M D, Huang K Y, Fujishiro H, et al. Numerical modelling of mechanical stresses in bulk superconductor magnets with and without mechanical reinforcement. Supercond Sci Technol, 2019, 32: 034002
Takahashi K, Fujishiro H, Naito T, et al. Fracture behavior analysis of EuBaCuO superconducting ring bulk reinforced by a stainless steel ring during field-cooled magnetization. Supercond Sci Technol, 2017, 30: 115006
Takahashi K, Namba S, Fujishiro H, et al. Thermal and magnetic strain measurements on a REBaCuO ring bulk reinforced by a metal ring during field-cooled magnetization. Supercond Sci Technol, 2018, 32: 015007
Fujishiro H, Ainslie M D, Takahashi K, et al. Simulation studies of mechanical stresses in REBaCuO superconducting ring bulks with infinite and finite height reinforced by metal ring during field-cooled magnetization. Supercond Sci Technol, 2017, 30: 085008
Mochizuki H, Fujishiro H, Naito T, et al. Trapped field characteristics and fracture behavior of REBaCuO bulk ring during pulsed field magnetization. IEEE Trans Appl Supercond, 2016, 26: 1–5
Wu H, Yong H, Zhou Y. Stress analysis in high-temperature superconductors under pulsed field magnetization. Supercond Sci Technol, 2018, 31: 045008
Yang X, Li X, He Y, et al. Investigation on stresses of superconductors under pulsed magnetic fields based on multiphysics model. Physica CSupercond its Appl, 2017, 535: 1–8
Wu H, Yong H, Zhou Y. Analysis of mechanical behavior in in-homogeneous high-temperature superconductors under pulsed field magnetization. Supercond Sci Technol, 2020, 33: 124002
Chen H, Yong H, Zhou Y. XFEM analysis of the fracture behavior of bulk superconductor in high magnetic field. J Appl Phys, 2019, 125: 103901
Xue F, Gou X. Crack problem for a bulk superconductor with non-superconducting inclusions under an electromagnetic force. AIP Adv, 2015, 5: 047128
Ru Y, Yong H, Zhou Y. Numerical simulation of dynamic fracture behavior in bulk superconductors with an electromagnetic-thermal model. Supercond Sci Technol, 2019, 32: 074001
Shen H, Ru Y, Wu H, et al. Three-dimensional peridynamic modeling of crack initiation and propagation in bulk superconductor during field cooling magnetization. Supercond Sci Technol, 2021, 34: 085020
Jing Z. Numerical modelling and simulations on the mechanical failure of bulk superconductors during magnetization: Based on the phase-field method. Supercond Sci Technol, 2020, 33: 075009
Ainslie M D, Srpcic J, Zhou D, et al. Toward optimization of multi-pulse, pulsed field magnetization of bulk high-temperature superconductors. IEEE Trans Appl Supercond, 2018, 28: 1–7
Fujishiro H, Naito T, Awaji S. Proposal of an effective mechanical reinforcement structure for a REBaCuO disk bulk pair by full metal encapsulation to achieve a higher trapped field over 20 T. Supercond Sci Technol, 2019, 32: 045005
Xia J, Li M, Zhou Y. Numerical investigations on the characteristics of thermomagnetic instability in MgB2 bulks. Supercond Sci Technol, 2017, 30: 075004
Ainslie M D, Zou J, Mochizuki H, et al. Pulsed field magnetization of 0°–0° and 45°–45° bridge-seeded Y-Ba-Cu-O bulk superconductors. Supercond Sci Technol, 2015, 28: 125002
Ainslie M D, Zhou D, Fujishiro H, et al. Flux jump-assisted pulsed field magnetisation of high-Jc bulk high-temperature superconductors. Supercond Sci Technol, 2016, 29: 124004
Fujishiro H, Naito T, Furuta D. Analysis of temperature and magnetic field distribution in superconducting bulk during pulsed field magnetization. IEEE Trans Appl Supercond, 2011, 21: 2723–2726
Callister W, David R. Material Science and Engineering—An Introduction. Danvers: WILEY, 2007
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant No. 11872195).
Rights and permissions
About this article
Cite this article
Wang, L., Wu, H. & Yong, H. Mechanical stress in high-temperature superconducting ring-shaped bulk during the pulsed-field magnetization. Sci. China Technol. Sci. 66, 574–585 (2023). https://doi.org/10.1007/s11431-022-2116-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-022-2116-3