Article PDF
Avoid common mistakes on your manuscript.
References
Shi Y, Wu T, Cai M, et al. Energy conversion characteristics of a hydropneumatic transformer in a sustainable-energy vehicle. Appl Energy, 2016, 171: 77–85
Kim S H, Lee G. An analytical method for gas flow measurement using conservative chemical elements. Appl Sci, 2021, 11: 6415
Pan H, Sun W, Sun Q, et al. Deep learning based data fusion for sensor fault diagnosis and tolerance in autonomous vehicles. Chin J Mech Eng, 2021, 34: 72
Xu W, Fan Z, Cai M, et al. Soft sensing method of LS-SVM using temperature time series for gas flow measurements. Metrol Meas Syst, 2015, 22: 383–392
Sun X Q, Wang Y J, Cai Y F, et al. An adaptive nonsingular fast terminal sliding mode control for yaw stability control of bus based on sti tire model. Chin J Mech Eng, 2021, doi: https://doi.org/10.21203/rs.3.rs-36541/v2
Fan Z C, Cai M L, Xu W Q. Non-invasive and non-intrusive gas flow measurement based on the dynamic thermal characteristics of a pipeline. Meas Sci Technol, 2012, 23: 105303
Al-Alweet F M, Jaworski A J, Alghamdi Y A, et al. Systematic frequency and statistical analysis approach to identify different gas-liquid flow patterns using two electrodes capacitance sensor: experimental evaluations. Energies, 2020, 13: 2932
Kim D K, Han I Y, Kim S J. Study on the steady-state characteristics of the sensor tube of a thermal mass flow meter. Int J Heat Mass Transfer, 2006, 50: 1206–1211
Zhang H, Zhang O, Li B, et al. Effect of drill pipe rotation on gas-solid flow characteristics of negative pressure pneumatic conveying using CFD-DEM simulation. Powder Tech, 2021, 387: 48–60
Li J, He K, Tan M, et al. An adaptive CEEMD-ANN algorithm and its application in pneumatic conveying flow pattern identification. Flow Meas Instrum, 2021, 77: 101860
Author information
Authors and Affiliations
Corresponding author
Additional information
This work was supported by the National Natural Science Foundation of China (Grant No. 51975024) and the China Postdoctoral Science Foundation (Grant No. 2019M660392).
Rights and permissions
About this article
Cite this article
Shi, Y., Han, C., Cai, M. et al. New advances in airflow measurements applied in airflow characteristics test of pneumatic components. Sci. China Technol. Sci. 64, 2781–2782 (2021). https://doi.org/10.1007/s11431-021-1946-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-021-1946-9