Mission overview and key technologies of the first Mars probe of China

Abstract

The first Chinese Mars exploration will fulfill the goals of “orbiting, landing and roving” in one mission. This paper briefly describes the process of international Mars exploration and analyzes the development of Chinese Mars exploration. It focuses on introducing the scientific significance and engineering difficulties of Mars exploration, and provides an overview of the system design of the probe, including the flight profile, the preliminary selection of the landing site, the entry, descent and landing (also known as EDL) process. Four types of key technologies, including telecommunications, autonomous control, the EDL process, and its structure and mechanism, are detailed in this paper. Finally, the paper highlights the expected scientific and engineering results of the mission.

This is a preview of subscription content, access via your institution.

References

  1. 1

    Manning R M, Adler M. Adler, landing on Mars. In: AIAA Space 2005 Conference. Long Beach, California, 2005

    Google Scholar 

  2. 2

    Ojha L, Wilhelm M B, Murchie S L, et al. Spectral evidence for hydrated salts in recurring slope lineae on Mars. Nat Geosci, 2015, 8: 829–832

    Article  Google Scholar 

  3. 3

    Steltzner A. Mars science laboratory entry, descent and landing system. In: 2006 IEEE Aerospace Conference. Big Sky, Montana: IEEE, 2006

    Google Scholar 

  4. 4

    Chen A, Beck R, Brugarolas P, et al. Entry system design and performance summary for the Mars science laboratory mission. In: AIAA/AAS Spaceflight Mechanics Meeting. Lihue, Hi, 2013

    Google Scholar 

  5. 5

    Golombek M, Rapp D. Size-frequency distributions of rocks on Mars and Earth analog sites: Implications for future landed missions. J Geophys Res, 1997, 102: 4117–4129

    Article  Google Scholar 

  6. 6

    Golombek M P, Haldemann A F C, Forsberg-Taylor N K, et al. Rock size-frequency distributions on Mars and implications for Mars Exploration Rover landing safety and operations. J Geophys Res, 2003, 108: 8086

    Google Scholar 

  7. 7

    Sun Z Z, Jia Y, Zhang H. Technological advancements and promotion roles of Chang’e-3 lunar probe mission. Sci China Tech Sci, 2013, 56: 2702–2708

    Article  Google Scholar 

  8. 8

    Braun R D, Manning R M. Mars exploration entry, descent, and landing challenges. J Spacecr Rockets, 2007, 44: 310–323

    Article  Google Scholar 

  9. 9

    Rivellini T. The challenges of landing on Mars. In: National Academy of Engineering, Eds. Frontiers of Engineering: Reports on Leading- Edge Engineering from the 2004 NAE Symposium on Frontiers of Engineering. Vol 34. Washington, DC: The National Academies Press, 2004

    Google Scholar 

  10. 10

    Wright M J, Edquist K, Hollis B, et al. Status of aerothermal modeling for current and future Mars exploration missions. In: 2006 IEEE Aerospace Conference. Big Sky, Montana, 2006

    Google Scholar 

  11. 11

    Cruz J R, Mineck R E, Keller D F, et al. Wind tunnel testing of various disk-gap-band parachutes. In: 17th AIAA Aerodynamics Decelerator Systems Technology Conference. Phoenix, AZ, 2003

    Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to LinZhi Meng.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Ye, P., Sun, Z., Rao, W. et al. Mission overview and key technologies of the first Mars probe of China. Sci. China Technol. Sci. 60, 649–657 (2017). https://doi.org/10.1007/s11431-016-9035-5

Download citation

Keywords

  • Mars mission
  • key technologies
  • China