Skip to main content

A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering


A knock-down factor is commonly used to take into account the obvious decline of the buckling load in a cylindrical shell caused by the inevitable imperfections. In 1968, NASA guideline SP-8007 gave knock-down factors which rely on a lower-bound curve taken from experimental data. Recent research has indicated that the NASA knock-down factors are inclined to produce very conservative estimations for the buckling load of imperfect shells, due to the limitations of the computational power and the experimental skills available five decades ago. A novel knock-down factor is proposed composed of two parts for the metallic stiffened cylinders. A deterministic study is applied to achieve the first part of the knock-down factor considering the measured geometric imperfection, the other types of imperfections are considered in the second part using a stochastic analysis. A smeared model is used to achieve the implementation of the measured geometric imperfection for the stiffened cylinder. This new robust and less conservative design for the stiffened cylinders is validated by using test results.

This is a preview of subscription content, access via your institution.


  1. Chu G P, Li Z M. Postbuckling behavior of 3D braided rectangular plates subjected to uniaxial compression and transverse loads in thermal environments. Sci China Tech Sci, 2014, 57: 1439–1453

    Article  Google Scholar 

  2. Hilburger M W, Starnes J H. Buckling behavior of compressionloaded composite cylindrical shells with reinforced cutouts. Int J Non-Linear Mech, 2006, 40: 1005–1021

    Article  Google Scholar 

  3. Donnell L H. A new theory for the buckling of thin cylinders under axial compression and bending. ASME Trans, 1934, 56: 795–806

    Google Scholar 

  4. Donnell L H, Wan C. Effect of imperfections on buckling of thin cylinders and columns under axial compression. J Appl Mech, 1950, 17: 73–79

    MATH  Google Scholar 

  5. Khot N S. On the influence of initial geometric imperfections on the buckling and postbuckling behaviour of fiber-reinforced cylindricalshells under uniform axial compression. Air Force Flight Dynamics Laboratory, technical report AFFDL-TR-68-136. Ohio, 1968

    Google Scholar 

  6. Koiter W T. A Translation of the Stability of Elastic Equilibrium. Delft: Technische Hooge School, 1945

    Google Scholar 

  7. Weingarten V I, Seide P, Peterson J P. NASA SP-8007-buckling of thin-walled circular cylinders. NASA Space Vehicle Design Criteria-Structures. 1965 (revised 1968)

    Google Scholar 

  8. Seide P, Weingarten V I, Morgan E J. The development of design criteria for elastic stability of thin shell structures. Space Technology Laboratory (TRW Systems), 1960

    Google Scholar 

  9. Weingarten V I, Morgan E J, Seide P. Elastic stability of thin-walled cylindrical and conical shells under axial compression. AIAA J, 1965, 3: 500–508

    Article  Google Scholar 

  10. Liang K, Ruess M, Abdalla M. The Koiter-Newton approach using von Kármán kinematics for buckling analyses of imperfection sensitive structures. Comput Methods Appl Mech Engrg, 2014, 279: 440–468

    Article  MathSciNet  Google Scholar 

  11. Liang K, Abdalla M, Gürdal Z. A Koiter-Newton approach for nonlinear structural analysis. Int J Numer Methods Engrg, 2013, 96: 763–786

    Article  Google Scholar 

  12. Zhou J J, Pan J L, Leung C K Y, et al. Experimental study on mechanical behaviors of pseudo-ductile cementitious composites under biaxial compression. Sci China Techl Sci, 2013, 56: 963–969

    Article  Google Scholar 

  13. Papadopoulos V, Papadrakakiss M. The effect of material and thickness variability on the buckling load of shells with random initial imperfections. Comput Methods Appl Mech Eng, 2005, 194: 1405–1426

    Article  MATH  Google Scholar 

  14. Stull C J, Nichols J M, Earls C J. Stochastic inverse identification of geometric imperfections in shell structures. Comput Methods Appl Mech Eng, 2011, 200: 2256–2267

    Article  MATH  MathSciNet  Google Scholar 

  15. Zhang A Y, Lu H B, Zhang D X. Synergistic effect of cyclic mechanical loading and moisture absorption on the bending fatigue performance of carbon/epoxy composites. J Mater Sci, 2014, 49: 314–320

    Article  Google Scholar 

  16. Zhang A Y, Lu H B, Zhang D X. Effects of voids on residual tensile strength after impact of hygrothermal conditioned CFRP laminates. Compos Struct, 2013, 95: 322–327

    Article  Google Scholar 

  17. Castroa S G, Zimmermannb R, Arbeloa M A, et al. Exploring the constancy of the global buckling load after a critical geometric imperfection level in thin-walled cylindrical shells for less conservative knock-down factors. Thin Wall Struct, 2013, 72: 76–87

    Article  Google Scholar 

  18. Huhne C, Rolfes R, Tessmer J. A new approach for robust design of composite cylindrical shells under axial compression. In: Proceedings of the International ESA Conference, Nordwijk, 2005

    Google Scholar 

  19. Huhne C, Rolfes R, Tessmer J. Robust design of composite cylindrical shells under axial compression-simulation and validation. Thin Wall Struct, 2008, 46: 947–962

    Article  Google Scholar 

  20. Castroa S G, Zimmermannb R, Arbeloa M A, et al. Geometric imperfections and lower-bound methods used to calculate knock-down factors for axially compressed composite cylindrical shells. Thin Wall Struct, 2014, 74: 118–132

    Article  Google Scholar 

  21. Wang S B, He C H. Weight control in design of space nuclear reactor system. Sci China Tech Sci, 2013, 56: 2594–2598

    Article  Google Scholar 

  22. Liu X J, Wang C, Zhou Y H. Topology optimization of thermoelastic structures using the guide-weight method. Sci China Tech Scis, 2014, 57: 968–979

    Article  Google Scholar 

  23. Brush D O, Almroth B O. Buckling of Bars, Plates, and Shells. New York: McGraw-Hill, Inc. Press, 1975. 12–20

    MATH  Google Scholar 

Download references

Author information

Authors and Affiliations


Corresponding author

Correspondence to YongJie Zhang.

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Liang, K., Zhang, Y., Sun, Q. et al. A new robust design for imperfection sensitive stiffened cylinders used in aerospace engineering. Sci. China Technol. Sci. 58, 796–802 (2015).

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI:


  • knock-down factor
  • NASA guideline SP-8007
  • stiffened cylinder
  • stochastic analysis
  • smeared model