Skip to main content
Log in

Synthesis of polycrystalline γ-AlON powders by novel wet chemical processing

  • Published:
Science China Technological Sciences Aims and scope Submit manuscript

Abstract

The synthesis of polycrystalline aluminum oxynitride (AlON) powders was investigated by the carbothermal reduction and nitridation (CRN) of amorphous precursor obtained by wet chemical processing. Co-precipitation processing was employed to achieve amorphous precursor from Al(NO3)3 solution dispersed by nanosized carbon particles, which was composed of Al(OH)3 and C particles homogeneously. The effects of the content of carbon black, pH value, and calcination temperature on formation of AlON phase were investigated by means of XRD, SEM and TEM, respectively. It was found that single phase AlON powder could be synthesized when the resultant precursors were calcined at 1750°C for 2 hours under flowing N2. Under optimal additional content of C (5.6wt%), the resultant AlON powders exhibited the primary particle size of about 1–3 μm with a specific surface area of 3.2 m2/g, which were superior to that of carbothermal reduction of immediate mixture of γ-Al2O3/C powders.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. Corbin N D. Aluminium oxynitride spinel: A review. J Eur Ceram Soc, 1989, 5: 143–154

    Article  Google Scholar 

  2. Wahl J M, Hartnett T M, Goldman L M, et al. Recent advances in ALONTM optical ceramic. In: Proceedings of SPIE: Window and Dome Technologies and Materials IX, 2005, 5786: 71–82

    Google Scholar 

  3. McCauley J W, Patel P, Chen M W. AlON: A brief history of its emergence and evolution. J Euro Cera Soc, 2009, 29: 223–236

    Article  Google Scholar 

  4. Wang X D, Wang F M, Li W C. Synthesis, microstructures and properties of γ-aluminum oxynitride. Mater Sci Engin, 2003, A342: 245–250

    Google Scholar 

  5. Patel P J. Processing and Characterization of Aluminum Oxynitride Ceramics. Dissertation of Doctoral Degree. Baltimore: Johns Hopkins University, 2000

    Google Scholar 

  6. Cheng J P, Agrawal D, Zhang Y J, et al. Preparation of Al2O3-AlON and Al2O3-AlN composites via reaction-bonding. J Mater Sci Lett, 2001, 20: 77–79

    Article  MATH  Google Scholar 

  7. Ish-Shalom M. Formation of aluminium oxynitride by carbothermal reduction of aluminium oxide in nitrogen. J Mater Sci Lett, 1982, 1: 147–149

    Article  Google Scholar 

  8. Zheng J, Forslund B. Carbothermal synthesis of aluminum oxynitride (ALON) powder, influence of starting materials and synthesis parameters. J Eur Ceram Soc, 1995, 15: 1087–1100

    Article  Google Scholar 

  9. Li Y W, Li N, Yuan R Z. The formation and stability of aluminum oxynitride spinel by carbonthermal reduction and reaction sintering processes. J Mater Sci, 1997, 32: 979–982

    Article  Google Scholar 

  10. Hartnett T M, Gentilman R L, Maguire E A. Aluminum Oxynitride having Improved Optical Characteristics and Method of Manufacture. U S Patent, No. 4481300, 1984

  11. Maguire E A, Hartnett T M, Gentilman R L. Method of Producing Aluminum Oxynitride having Improved Optical Characteristics. U S Patent, No. 4686070, 1987

  12. Yuan X Y, Liu X J, Zhang F, et al. Synthesis of γ-AlON powders by a combinational method of carbothermal reduction and solid-state reaction. J Am Ceram Soc, 2010, 93(1): 22–24

    Article  Google Scholar 

  13. Qin M L, Du X L, Wang J, et al. Influence of carbon on the synthesis of AlN powder from combustion synthesis precursors. J Eur Ceram Soc, 2009, 29: 795–799

    Article  Google Scholar 

  14. Kung J C, Zhang C R, Zhou X G, et al. Synthesis of high thermal conductivity nano-scale aluminium nitride by a new carbothermal reduction method from combustion precursor. J Crystal Growth, 2003, 256: 288–291

    Article  Google Scholar 

  15. Sacks M D, Wang C A, Yang Z H, et al. Carbothermal reduction synthesis of nanocrystalline zirconium carbide and hafnium carbide powders using solution-derived precursors. J Mater Sci, 2004, 39: 6057–6066

    Article  Google Scholar 

  16. Kikdkawa S, Hatta N, Takeda T. Preparation of aluminum oxynitride by nitridation of a precursor derived from aluminum-glycine gel and the effects of the presence of europium. J Am Ceram Soc, 2008, 91(3): 924–928

    Article  Google Scholar 

  17. Deng L Y, Lei J X, Shi Y, et al. Photoluminescence of Tb3+/Ce3+ codoped aluminum oxynitride powders. Mater Lett, 2011, 65: 769–771

    Article  Google Scholar 

  18. Chen C F, Chen Z G, Hao C, et al. Study on antiaggl imeration of nanometer Al2O3 powder prepared by chemical precipitation (in Chinese). Mater Mech Eng, 2000, 24(5): 26–28

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Ying Shi.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Lei, J., Ma, F., Shi, Y. et al. Synthesis of polycrystalline γ-AlON powders by novel wet chemical processing. Sci. China Technol. Sci. 55, 3405–3410 (2012). https://doi.org/10.1007/s11431-012-5015-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11431-012-5015-2

Keywords

Navigation