Abstract
In this paper, two sub-grid scale (SGS) models are introduced into the Lattice Boltzmann Method (LBM), i.e., the dynamics SGS model and the dynamical system SGS model, and applied to numerically solving three-dimensional high Re turbulent cavity flows. Results are compared with those obtained from the Smagorinsky model and direct numerical simulation for the same cases. It is shown that the method with LBM dynamics SGS model has advantages of fast computation speed, suitable to simulate high Re turbulent flows. In addition, it can capture detailed fine structures of turbulent flow fields. The method with LBM dynamical system SGS model dose not contain any adjustable parameters, and can be used in simulations of various complicated turbulent flows to obtain correct information of sub-grid flow field, such as the backscatter of energy transportation between large and small scales. A new average method of eliminating the inherent unphysical oscillation of LBM is also given in the paper.
Similar content being viewed by others
References
Chen S, Doolen G D. Lattice Boltzmann method for fluid flows. Ann Rev Fluid Mech, 1998, 30: 329–364
Qian Y, d’Humiéres D, Lallemand P. Lattice BGK models for Navier-Stokes equations. Europhys Lett, 1992, 17(6): 479–484
Germano M, Piomelli U, Moin P, et al. A dynamic subgrid-scale eddy viscosity model. Phys Fluids, 1991, A 3:1760–1765
Luo L. Lattice-gas automata and lattice Boltzmann equations for two-dimensional hydrodynamics. Ph D Thesis. Atlanta: Georgia Institute of Technology, 1993
Martinez D O, Matthaeus W H, Chen S, et al. Comparison of spectral method and lattice Boltzmann simulations of two-dimensional hydrodynamics. Phys Fluids, 1994, 6: 1285–1298
Wu C J, Guan H, Zhao H L. A method of large-eddy simulation based on the SGS small scale equations. New Advances and Their Applications of Turbulence Theory (in Chinese). Shanghai: Shanghai University Press, 2000. 77–82
Shankar P N, Deshpande M D. Fluid mechanics in the driven cavity. Ann Rev Fluid Mech, 2000, 32: 93–136
Prasad A K, Koseff J R. Reynolds number and end-wall effects on a lid-driven cavity flow. Phys Fluids A, 1989, 1: 208–218
Deshpande M D, Shanker P N. Direct numerical simulation of a complex turbulent flow. Curr Sci, 1994, 66: 767–770
Verstappen R W C P, Veldman A E. P. Direct numerical simulation of a 3D turbulent flow in a driven cavity at Re=10,000. In: Wagner S, et al. eds. Computational Fluid Dynamics’ 94. New York: Wiley, 1994. 558–565
Koseff J R, Street R L. Visualization of a shear driven three-dimensional recirculating flow. J Fluids Eng, 1984a, 106: 21–29
Koseff J R, Street R L. On the endwall effects in a lid-driven cavity flow. J Fluids Eng, 1984b, 106: 385–389
Koseff J R, Street R L. The lid-driven cavity flow: a synthesis of qualitative and quantitative observations. J Fluids Eng, 1984c, 106: 390–398
Oshima D, Tsutahara M, Mizutani S. A study of turbulence simulations using finite difference Lattice Boltzmann Method. J Fluid Sci Tech, 2007, 2(3): 582–591
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the Key Project of National Natural Science Foundation of China (Grant No. 10532030)
Rights and permissions
About this article
Cite this article
Guan, H., Wu, C. Large-Eddy Simulations of turbulent flows with lattice Boltzmann dynamics and dynamical system sub-grid models. Sci. China Ser. E-Technol. Sci. 52, 670–679 (2009). https://doi.org/10.1007/s11431-009-0069-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-009-0069-5