Abstract
Tip clearance leakage flow in a radial inflow turbine rotor for microturbines under the stage environment is investigated using a three-dimensional viscous flow simulation. The results indicate that the scraping flow caused by relative motion between casing and rotor tip, and the pressure difference between pressure side and suction side at rotor tip, play important roles in tip clearance leakage flow. The more the rotor tip speed increases and tip clearance height decreases, the more the scraping effect acts. Though the leakage velocity of tip clearance at midsection and exducer regions changes less when the rotor rotational speed is changing, the distance between passage vortex and rotor suction side varies in evidence. Main leakage flow rate of tip clearance takes place at region of exducer tip and some seal configurations will be quite effective for cutting leakage flow if these configurations are arranged over midsection and exducer of the radial inflow rotor.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Xu J Z. Prospect of the distributed power generation and CHP generation. Energy Conserv Environ Prot (in Chinese), 2002, (3): 10–14
Feng Z P. Technology evolving and application prospect of microturbine. Gas Turbine Power Generation Technology (in Chinese) 2001, 3(1): 9–16
Futral S M, Holeski D E. Experimental results of varying the blade-shroud clearance in a 6.02-inch radialiInflow turbine. NASA Technical Note D-5513, 1970
Ishimo M, Otuka M, Uchida H, et al. The effects of tip-clearance on small radial turbine performances. In: Proceedings of 1991 Yokohama International Gas Turbine Congress and Exhibition. Tokyo: Gas Turbine Soc Jpn, 1991. 165–169
Deng Q H, Niu J F, Feng Z P. Effects of rotor blade tip clearance on total aerodynamic performance in a radial inflow turbine. J Eng Thermophys (in Chinese) 2006, 27(3): 408–410
Dambach R, Hodson H P, Huntsman I. An experimental study of tip clearance flow in a radial inflow turbine. ASME J Turbomach, 1998, 121(4): 644–650
Deng Q H, Niu J F, Feng Z P. Numerical simulation of tip clearance flow in a radial inflow turbine for microturbines. J Xi’an Jiaotong Univ (in Chinese), 2005, 39(7): 685–688
Deng Q H, Niu J F, Feng Z P. Tip leakage flow in radial inflow rotor of a microturbine with varying blade-shroud clearance. In: ASME Turbo Expo 2007. New York: Amer Soc Mech Eng GT2007-27722, 2007, 1081–1088
Sjolander S A, Cao D. Measurements of the flow in an idealized turbine tip gap. ASME J Turbomach, 1995, 117(4): 578–584
Rudiger M, Jorg K, Jurgen F M, et al. Computation of three-dimensional viscous transonic turbine stage flow including tip clearance effects. In: Proceedings of the International Gas Turbine and Aeroengine Congress and Exposition. New York: Amer Soc Mech Eng, 95-GT-76, 1995. 8
Deng Q H, Feng Z P, Li J. Seal configuration of radial inflow turbine rotor for tip clearance leakage. State Invention Patent of the People’s Republic of China (in Chinese), Applied No. 200710018883.9, 2007
Deng Q H, Feng Z P. A rotor configuration of radial inflow turbines. State Invention Patent of the People’s Republic of China (in Chinese), Applied No. 200710019173.8, 2007
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by National High Technology Research and Development Program of China (Grant Nos. 2002AA503020, 2004AA503020) and Doctoral Foundation of Xi’an Jiaotong University (Grant No. DFXJTU2005-02)
Rights and permissions
About this article
Cite this article
Deng, Q., Niu, J. & Feng, Z. Study on leakage flow characteristics of radial inflow turbines at rotor tip clearance. Sci. China Ser. E-Technol. Sci. 51, 1125–1136 (2008). https://doi.org/10.1007/s11431-008-0164-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11431-008-0164-z