Abstract
VMIB (virtual multi-dimensional internal bonds) is a multiscale mechanical model developed from the VIB (virtual internal bond) theory. In VIB theory, the solid material is considered to consist of random-distributed material particles in microscale. These particles are connected with normal bonds. The macro constitutive relation is derived from the cohesive law between particles. However, in VMIB, the micro particles are connected with both normal and shear bonds. The macro constitutive relation is derived in terms of bond stiffness coefficients. It has been theoretically certified that there exists a corresponding relationship between the two bond stiffness coefficients and the two macro material constants, i.e. the Young's modulus and Poisson ratio. This corresponding relationship suggests that it should be necessary and sufficient to simultaneously account for the normal and shear interactions between particles. Due to the fact that the fracture criterion is directly incorporated into the constitutive relation, both VIB and VMIB present many advantages in simulating fractures of materials. In the damage model of rock mass, a damage tensor is usually defined to describe the distribution of cracks. The damage value in one direction determines the relative stiffness of rock mass in this direction. In VMIB solid, the relative distribution density of micro bonds in one direction determines the relative macro stiffness of the material in this direction. The effects of the damage value and the relative distribution density of bonds are consistent. To simulate the failure behavior of rock mass with VMIB, the presented paper sets up a quantitative relationship between the damage tensor and the relative distribution density of bonds. Comparison of the theoretical and the experimental results shows that VMIB model can represent the effect of distributed cracks on rock mass with this relationship. The presented work provides a foundation for further simulating fracture behavior of rock mass with VMIB model, and an alternative approach for modeling other multi-cracked body.
Similar content being viewed by others
References
Kawamoto T, Ichikawa Y, Kyoya T. Deformation and fracturing behavior of discontinuous rock mass and damage mechanics theory. Intern J Numer Anal Meth Geomech, 1988, 12: 1–30
Gao H J, Klein P. Numerical simulation of crack growth in an isotropic solid with randomized internal cohesive bond. J Mech Phys Solids, 1998, 46(2): 187–218
Klein P, Gao H J. Crack nucleation and growth as strain localization in a virtual-bond continuum. Eng Fract Mech, 1998, 61(1): 21–48
Zhang Z N, Ge X R. A new quasi-continuum constitutive model for crack growth in an isotropic solid. Eur J Mech A-Solid, 2005, 24(2): 243–252
Zhang Z N, Ge X R. Micromechanical consideration of tensile crack behavior based on virtual internal bond in contrast to cohesive stress. Theor Appl Fract Mech, 2005, 43(3): 342–359
Zhang Z N, Ge X R. Micromechanical modelling of elastic continuum with virtual multi-dimensional internal bonds. Intern J Numer Meth Eng, 2006, 65(1): 135–146
Zhang Z N, Ge X R, Li Y H. A multiscale mechanical model of materials based on virtual internal bond theory. Acta Mech Solida Sin, 2006, 19(3): 196–202
Volokh K Y, Gao H. On the modified virtual internal bond method. J Appl Mech, 2005, 72(6): 969–971
Thiagarajan G, Misra A. Fracture simulation for anisotropic materials using a virtual internal bond model. Intern J Solids Struct, 2004, 41(11–12): 2919–2938
Marsden J E, Hughes T J R. Mathematical Foundations of Elasticity. Englewood Cliffs, New Jersey: Prentice-Hall, 1983
Ogden R W. Non-linear Elastic Deformations. New York: John Wiley & Sons, 1984
Milstein F. Crystal Elasticity. In: Hopkins H G, Sewell M J. Mechanics of Solids. Oxford: Pergamon Press, 1982
Ericksen J L. Phase Transformations and Material Instabilities in Solids. New York: Academic Press, 1984
Tadmor E B, Ortiz M, Phillips R. Quasicontinuum analysis of defects in solids. Phil Mag A 1996, 73(6): 1529–1563
Liang N G, Cheng P S. A 3-D composite constitutive model of elastoplasticity for polycrystalline materials. Acta Mecha Sin (in Chinese), 1990, 22(6): 680–688
Liu X, Liang N, Li M. 3-D network model and its parameter calibration. Sci China Ser A-Math, 2002, 45(10): 1351–1360
Azevedo N M, Lemos J V. A generalized rigid particle contact model for fracture analysis. Intern J Numer Anal Meth Geomech, 2005, 29(3): 269–285
Tang C A, Tham L G, Wang S H, et al. A numerical study of the influence of heterogeneity on the strength characterization of rock under uniaxial tension. Mech Mater, 2007, 39(4): 326–339
Chang C S, Wang T K, Sluys L J, et al. Fracture modelling using a micro-structural mechanics approach-I. Theory and formulation. Eng Fract Mech, 2002, 69(17): 1941–1958
Zhang Z N, Ge X R, Li Y H. Application of VMIB (virtual multi-dimensional internal bond) to the uniaxial failure of rocklike materials. J Geotech Eng (in Chinese), 2006, 28(4): 504–509
Kachanov L M. Time of the rupture process under creep condition. Izv Akad Nauk USSR Otd Tekhn Nauk, 1958, 8: 26–31
Feng X Q, Yu S W. Estimate of effective elastic moduli with microcrack interaction effects. Theor Appl Fract Mech, 2000, 34: 225–233
Feng X Q, Gross D. An approximate scheme for considering effects of microcrack interaction on the overall constitutive relation of brittle solids under complex loading. Acta Mech, 2000, 139: 143–159
Author information
Authors and Affiliations
Corresponding author
Additional information
Supported by the National Natural Science Foundation of China (Grant No. 50609013)
Rights and permissions
About this article
Cite this article
Zhang, Z., Ge, X. Virtual multi-dimensional internal bonds model and its application in simulation of rock mass. Sci. China Ser. E-Technol. Sci. 51, 192–201 (2008). https://doi.org/10.1007/s11431-008-0014-z
Received:
Accepted:
Issue Date:
DOI: https://doi.org/10.1007/s11431-008-0014-z