Commentary on “Correction to: On the calculation of fuel savings through lightweight design in automotive life cycle assessments” by Koffler and Rohde-Brandeburger (2018)

This is a preview of subscription content, log in to check access.

Fig. 1

References

  1. Kim HC, Wallington TJ (2013) Life cycle assessment of vehicle lightweighting: a physics-based model of mass-induced fuel consumption. Environ Sci Technol 47:14358–14366

    Article  CAS  Google Scholar 

  2. Kim HC, Wallington TJ (2016) Life cycle assessment of vehicle lightweighting: a physics-based model to estimate use-phase fuel consumption of electrified vehicles. Environ Sci Technol 50:11226–11233

    Article  CAS  Google Scholar 

  3. Kim HC, Wallington TJ, Sullivan JL, Keoleian GA (2015) Life cycle assessment of vehicle lightweighting: novel mathematical methods to estimate use-phase fuel consumption. Environ Sci Technol 49:10209–10216

    Article  CAS  Google Scholar 

  4. Koffler C, Rohde-Brandenburger K (2010) On the calculation of fuel savings through lightweight design in automotive life cycle assessments. Int J Life Cycle Assess 15:128–135

    Article  CAS  Google Scholar 

  5. Koffler C, Rohde-Brandenburger K (2018) Correction to: On the calculation of fuel savings through lightweight design in automotive life cycle assessments. Int J Life Cycle Assess 23:1525–1526

    Article  Google Scholar 

  6. Nam EK, Giannelli R (2005) Fuel consumption modeling of conventional and advanced technology vehicles in the physical emission rate estimator (PERE). U.S. Environmental Protection Agency

  7. Ross M (1997) Fuel efficiency and the physics of automobiles. Contemp Phys 38:381–394

    Article  Google Scholar 

  8. Willans PW (1888) Economy trials of a non-condensing steam-engine: simple, compound and triple. Minutes of the Proceedings of the Institution of Civil Engineers 93:128–188

    Article  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Hyung Chul Kim.

Additional information

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Responsible editor: Mary Ann Curran

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Kim, H.C., Wallington, T.J., Sullivan, J.L. et al. Commentary on “Correction to: On the calculation of fuel savings through lightweight design in automotive life cycle assessments” by Koffler and Rohde-Brandeburger (2018). Int J Life Cycle Assess 24, 397–399 (2019). https://doi.org/10.1007/s11367-019-01584-z

Download citation