Life cycle inventory processes of the integrated steel plant (ISP) in Krakow, Poland—coke production, a case study

  • Boguslaw Bieda
  • Katarzyna Grzesik
  • Dariusz Sala
  • Bartłomiej Gaweł
LCI METHODOLOGY AND DATABASES

Abstract

Purpose

The goal of this paper is to describe the life cycle inventory (LCI) approach to the cokemaking process in the Integrated Steel Plant’s Coke Oven Battery (ISPCOB) in Kraków, Poland. The system boundaries were labeled as gate-to-gate, covering the full chain process of coke production. The background input and output data from the coke production process (CPP) has been inventoried.

Methods

The functional unit (FU) was produced of 1 Mg of the coke in ISPCOB. The following inputs and outputs have been taken into account in the LCI study: product (coke), all intermediate products, by-products, and emissions. Raw fuel mining and means of external transportation of natural gas, manufacture of downstream products, their use, end of life, and infrastructure were not included. Time coverage is 2004, because since 2005, robust inventory data coverage of full ISP coke processes are lacking. Data used for inventory calculation are affected by uncertainty.

Results and discussion

With regard to 1 Mg of coke produced in ISPCOB in 2004, the consumption of coke coal and coke oven gas amounted to 1.35 Mg and 195 m3, respectively. The main materials, fuels, and energy used for the coke production were electric energy, steam, air, heat, and industrial water. Emissions of SO2, NO2, CO, CO2, NH3, aliphatic hydrocarbons, HCN, H2S, CS2, benzene, xylene, toluene, phenol, pyridine, dust, tar matters, Cr, Cd, Cu, Pb, Ni, and Mn have been considered.

Conclusions

The data for the LCI have been based on the year 2004. Uncertainty assessment in LCI is discussed. The purpose of this study is to help ISP authorities to solve environmental and technical aspects, as well as to train steel industry people in the field of life cycle assessment. Finally, presented LCI study for ISPCOB can serve as a representative data for LCA analysis of coke production in coke plants.

Recommendations

The impact assessment phase aims to present more understandable results from the inventory analysis, and life cycle impact assessment (LCIA) will be the direction for future research.

Keywords

Air emissions Coke Coke oven battery Cokemaking process Coke oven gas Life cycle inventory (LCI) Poland 

Notes

Acknowledgments

The authors would like to express their gratitude to the anonymous reviewers for their helpful comments.

Conflict of interest

The authors declare that they have no conflict of interest.

Compliance with ethical standards

Research is not involving human participants and/or animals.

References

  1. Barella S, Bondi E, Di Cecca C, Ciuffini AF, Gruttadauria A, Mapelli C, Mombelli D (2014) New perspective in steelmaking activity to increase competitiveness and reduce environmental impact. La Metallurgia Italiana n.11-12:31–40Google Scholar
  2. Bieda B (2011) Life cycle inventory of energy production in ArcelorMittal steel power plant Poland S.A. in Krakow, Poland. Int J Life Cycle Assess 16:503–511CrossRefGoogle Scholar
  3. Bieda B (2012a) Life cycle inventory processes of the ArcelorMittal Poland (AMP) S. A. in Kraków, Poland – basic oxygen furnace steel production: a case study. Int J Life Cycle Assess 17(4):463–470CrossRefGoogle Scholar
  4. Bieda B (2012b) Life cycle inventory processes of the Mittal Steel Poland (MSP) S. A. in Krakow – blast furnace pig iron production – a case study. Int J Life Cycle Assess 17(6):787–794CrossRefGoogle Scholar
  5. Bieda B, Tadeusiewicz R (2005) Optimal schemes of groundwater monitoring for prevention of contaminated water intrusion in the Ispat Polska Stal S.A. in Krakow, Poland. Water resources management III, third international conference on Water resources management, eds. M. de Conçeicao Cunha, C. A. Brebbia. Southampton, Boston, WIT Press, 2005 (WIT Transactions on Ecology and the Environment. Vol. 80:69–77Google Scholar
  6. Burchart-Korol D (2013) Life cycle assessment of steel production in Poland: a case study. J Clean Prod 54:235–243CrossRefGoogle Scholar
  7. Clavreul J, Guyonnet D, Tonini D, Christensen TH (2013) Stochastic and epistemic uncertainty propagation in LCA. Int J Life Cycle Assess 18(7):1393–1403CrossRefGoogle Scholar
  8. Commission E (2009) Integrated pollution prevention and control. Draft reference document on best available techniques for the production of iron and steel. Institute for Prospective Technological Studies, SevilleGoogle Scholar
  9. DECC (2010) Coal trade and production statistics. Digest of UK energy statistics. Department of Energy and Climate Change, LondonGoogle Scholar
  10. EC (2008) Guidance on the interpretation of key provisions of Directive 2008/98/EC on waste. http://ec.europa.eu/environment/waste/framework/pdf/guidance_doc.pdf. Accessed 10 Oct 2014
  11. Finnveden G, Hauschild MZ, Ekvall T, Guinée J, Heijungs R, Hellweg S, Koehler A, Pennington D, Suh S (2009) Recent development in life cycle assessment. J Environ Manag 91(1):1–21CrossRefGoogle Scholar
  12. Hunkeler D, Rebitzer G (2005) Editorial: the future of life cycle assessment. Int J Life Cycle Assess 10(5):305–307CrossRefGoogle Scholar
  13. Iosif A-M, Hanrot F, Birat J-P, Ablitzer D (2010) Physicochemical modelling of classical steelmaking route for life cycle inventory analysis. Int J Life Cycle Assess 15:304–310CrossRefGoogle Scholar
  14. ISD DUNAFERR (2012) Absolute record at the coking plant http://www.dunaferr.hu/en/mediacentre/press-release/301-aaa. Accessed 13 July 2014
  15. ISO 14040 (2006) Environmental management – life cycle assessment – principles and framework. International Organization for Standarization, GenevaGoogle Scholar
  16. ISO 14041 (2006) Environmental management – life cycle assessment – goal and scope definition and inventory analysis. International Organization for Standarization, GenevaGoogle Scholar
  17. ISO 14044 (2006) Environmental management – life cycle assessment – requirements and guidelines. International Organization for Standarization, GenevaGoogle Scholar
  18. Jarno L (2005) Rola Jastrzębskiej Spółki Węglowej S.A. w tworzeniu Grupy Węglowo-Koksowej. POLITYKA ENERGETYCZNA 8(Zeszyt specjalny):613–621, Polish Google Scholar
  19. Jones A (2013) Coke Markets-European perspective. Eurocoke Conference, Kraków, Poland. http://www.resource-net.com. Accessed 15 Oct 2014
  20. Kim YM, Park D, Lee DS, Park JM (2007) Instability of biological nitrogen removal in a cokes wastewater treatment facility during summer. J Hazard Mater 141:27–32CrossRefGoogle Scholar
  21. Kim YM, Park D, Jeon CO, Lee DS, Park JM (2008) Effect of HRT on the biological pre-denitrifaction process for simultaneous removal of toxic pollutants from cokes wastewater. Bioresour Technol 99:8824–8832CrossRefGoogle Scholar
  22. Klejnowski K, Łusiak T, Morel J, Olczak C, Sobolewski A, Ściążko M, Tatara T (2005) The Best Available Techniques (BAT) Guidelines for the coking industry. The Ministry of Environment. Warszawa, December 2005. (Polish: NAJLEPSZE DOSTĘPNE TECHNIKI (BAT) WYTYCZNE DLA BRANŻY KOKSOWNICZEJ (2005) Ministerstwo Środowiska Warszawa, grudzień 2005)Google Scholar
  23. Klüppel HJ (1998) ISO 14041: environmental management – life cycle assessment – goal and scope definition - inventory analysis. Int J Life Cycle Assess 3(6):301CrossRefGoogle Scholar
  24. Kosyrczyk L, Świeboda B, Lewandowski L (2012) Co nowego w chińskim koksownictwie (2012). KARBO 4:216–221Google Scholar
  25. Kulczycka J, Henclik (2009) Ocena wpływu cyklu życia procesów wytwórczych na Wydziałach Surowcowych i Wytwarzania Stali Huty ArcelorMittal Poland SA, Oddział w Krakowie, Polish Akademy of Sciences, Krakow (in Polish)Google Scholar
  26. Kulczycka J, Kurczewski P, Kasprzak J, Lewandowska A, Lewicki R, Witczak A, Witczak J (2011) The polish centre for life cycle assssment-the centre for life cycle assessment in Poland. Int J Life Cycle Assess 16:442–444CrossRefGoogle Scholar
  27. Kumar MS, Vaidya AN, Shivaraman N, Bal AS (2003) Performance evaluation of a full-scale coke oven waste water treatment plant in an integrated steel plant. Ind J Environ Health 45:29–38Google Scholar
  28. Lindfors LG, Christiansen K, Hoffman L, Virtanen Y, Juntilla V, Hanssen OJ, Rønning A, Ekvall T, Finnvenden G (1995) Nordic guidelines on life-cycle assessment, Nird 1995: 20, Nordic Council of Ministers, Copenhagen Marañόn E, Vázquez I, Rodríguez J, Castrillόn L, Fernández Y, Lόpez H (2008) Treatment of coke wastewater in a sequential batch reactor (SBR) at pilot plant scale. Bioresour Technol 99:4192–4198Google Scholar
  29. Liu X, Yuan Z (2015) Life cycle environment al performance of by-product coke production in China. J Clean Prod. doi: 10.1016/j.jclepro.2014.12.102 Google Scholar
  30. Marañόn E, Vázquez I, Rodríguez J, Castrillόn L, Fernández Y, Lόpez H (2008) Treatment of coke wastewater in a sequential batch reactor (SBR) at pilot plant scale. Bioresour Technol 99:4192–4198CrossRefGoogle Scholar
  31. Mazur M, Gruszczyński S, Bergier T, Bogacki M, Grzesik K, Oleniacz R, Szczygłowski P, Wszołek T, Wszołek W, Ciesielka W, Litwa P, Kłaczyński M (2006) Wniosek o wydanie pozwolenia zintegrowanego dla Instalacji Mittal Steel Poland S.A. Oddział w Krakowie – Streszczenie (w języku niespecjalistycznym), Kraków, 2006 (in Polish)Google Scholar
  32. McKenna RC, Norman JB (2010) Spatial modeling of industrial heat loads and recovery potentials in the UK. Energy Policy 38(10):5878–5891CrossRefGoogle Scholar
  33. Metallurgical Coal (Coke) (1997) http;//http://www.flatheadmemo.com/north_fork_coal/Coal/News/coke.html. Accessed 13 July 2014
  34. Ministry of Industry and Information Technology of P.R. China (2010) Program of promoting the implementation of coke dry quenching technology in iron & steel industry nd coking industryGoogle Scholar
  35. Mittal Steel Poland (2007) Environmental Impact Report (in Polish)Google Scholar
  36. Nichol L (2012) Advancing cleaner coke productionGoogle Scholar
  37. Ogłoszenie (2014) Ogłoszenie o udzieleniu przez Marszałka Województwa Małopolskiego pozwolenia zintegrowanego. http://bip.malopolska.pl/umwm/Article/get/id,972964.html. Accessed 31 March 2015
  38. Ozga-Blaschke U, Lorenz U, Blaschke S, Okulski T (2008) In: Ozga-Blaschke U (ed) METODA OKREŚLENIA OPTYMALNEJ STRUKTURY KRAJOWEJ PRODUKCJI KOKSU NA PODSTAWIE BADAÑ RELACJI CEN STALI, KOKSU METALURGICZNEGO I WĘGLA KOKSOWEGO NA RYNKACH MIÊDZYNARODOWYCH, WYDAWNICTWO IGSMIE PAN, Kraków, 2008, https://www.min-pan.krakow.pl/se/ksiazki/metoda_koks_ozga2008_z.pdf. Accessed 20 Oct 2014 (in Polish)
  39. Park D, Lee DS, Kim YM, Park JM (2007) Bioaugmentation of cyanide-degrading microorganisms in a full-scale Cowes wastewater treatment facility. Bioresour Technol 99:2092–2096CrossRefGoogle Scholar
  40. PE International (2010) GaBi 4.4 Software and databases, Leinfelden-echterdingen, GermanyGoogle Scholar
  41. Polenske KR, McMichael FC (2002) A Chinese cokemaking process-flow model for energy and environmental analyses. Energy Policy 30:865–883CrossRefGoogle Scholar
  42. Remus R. Monsonet MAA, Roudier S, Sancho D (2013) Best Available Techniques (BAT) reference document for iron and steel production. JRC reference report. Industrial Emissions Directive 2010/75/EU (Integated Pollution Prevention and Control). http://eippcb.jrc.ec.europa.eu/reference/BREF/IS_Adopted_03_2012.pdf. Accessed 25 March 2015
  43. Sonnemann G. Castells F, Schumacher M (2004) Integrated life-cycle and risk assessment for industrial processes. Lewis Publishers. A CRC Press CompanyGoogle Scholar
  44. Staib C, Lant P (2007) Thiocyanate degradation during activated sludge treatment of coke-ovens wastewater. Biochem Eng J 34:122–130CrossRefGoogle Scholar
  45. Udo de Haes HA, Heijungs R, Suh S, Huppes G (2004) Three strategies to overcome the limitations of life-cycle assessment. J Ind Ecol 8(3):19–32CrossRefGoogle Scholar
  46. Valia HS (2014) Coke production for blast furnace ironmaking. Steel Market Development Institute, Privacy Policy. http://www.autosteel.org/en/Steel_org/Web%20Root/Making%20Steel/How%20Its%20Made/Processes/Processes%20Info/Coke%20Production%20For%20Blast%20Furnace%20Ironmaking.aspx. Accessed 8 July 2014
  47. Vasko FJ, Newhart DD, Strauss AD (2005) Coal blending models for optimum cokemaking and blast furnace operation. J Oper Res Soc 56:235–243CrossRefGoogle Scholar
  48. Walsh C, Thornley P (2012) The environmental impact and economic feasibility of introducing an Organic Rankine Cycle to recover low grade heat during the production of metallurgical coke. J Clean Prod 34:29–37CrossRefGoogle Scholar
  49. Warzecha A, Nocuń-Bąk M, Gałeczka G (2008) Polish coke making in light of international coke industry. SYMPOZJA I KONFERENCJE nr 73, Materiały XXII Konferencji z cyklu, Zagadnienia surowców energetycznych energii w gospodarce krajowe, Ustroñ, 19–22.10.2008. https://www.min-pan.krakow.pl/se/pelne_teksty22/czII/k22_warzecha_z.pdf. Accessed 8 Oct 2014 (in Polish)
  50. Weidema B, Hischier R (2006) Ecoinvent data v2.2, St. Gallen, SwitzerlandGoogle Scholar
  51. Więcław-Solny L, Krótki A, Tatarczuk A, Wilk A (2012) Zrozumieć process “Carbon Capturage” – badania procesu wychwytu CO2 ze spalin w Programie Strategicznym. Nowa Energia 2(26):183–184 (in Polish) Google Scholar
  52. Woo SH, Jean CO, Yun Y-S, Choi H, Lee C-S, Lee DS (2009) On-line estimation of key process variables based on kernel partial least squares in an industrial cokes wastewater treatment plant. J Hazard Mater 161:538–544CrossRefGoogle Scholar
  53. World Steel Association (2011) Methodology report – life cycle inventory study for steel products, Brussels, BelgiumGoogle Scholar
  54. Xue B, Ma Z, Geng Y, Heck P, Ren W, Tobias M, Maas A, Jiang P, Puppim de Oliveira JA, Fujita T (2015) A life cycle co-benefits assessment of wind power in China. Renew Sust Energ Rev 41:338–346CrossRefGoogle Scholar
  55. Zhang M, Tay JH, Qian Y, Gu XS (1998) Coke plant wastewater treatment by fixed biofilm system for COD and HN3-N removal. Water Res 32:519–527CrossRefGoogle Scholar
  56. Zhou X, Li Y, Zhaob Y, Yueb X (2012) Pilot-scale anaerobic/anoxic/oxic/oxic biofilmprocess treating coking wastewater. Wiley Online Libr. doi: 10.1002/jctb.3832 Google Scholar

Copyright information

© Springer-Verlag Berlin Heidelberg 2015

Authors and Affiliations

  • Boguslaw Bieda
    • 1
  • Katarzyna Grzesik
    • 2
  • Dariusz Sala
    • 1
  • Bartłomiej Gaweł
    • 1
  1. 1.Management DepartmentAGH University of Science and TechnologyKrakówPoland
  2. 2.Faculty of Mining Surveying and Enviromental EngineeringAGH University of Science and TechnologyKrakówPoland

Personalised recommendations