Abstract
This study aims to enhance the energy use of two products of industry — Queen Palm residue and kraft lignin (KF) — through the combination of two technologies — briquetting and slow pyrolysis. The addition of 20% KF provided briquettes with higher physical, energy, and mechanical properties. The yields of the pyrolysis products were affected by both the pyrolysis temperature and the addition of KF. In the bio-oil, the presence of phenols, methyl phenols, and methoxy phenols was highlighted; these compounds were present in greater quantities in the treatments with KF. It is concluded that combining the briquetting and pyrolysis processes produces both energy and economic benefits because it is possible to transport lighter loads with the same amount of energy per volume. Under the briquetting conditions adopted in this study, the addition of KF as a binder is necessary because this results in briquettes with better physical, energy and mechanical properties.
Similar content being viewed by others
Data availability
All data generated or analyzed during this study are included in this published article.
References
Ashwath N (2010) Evaluating biodiesel potential of Australian native and naturalised plant species. Rural Industries Research and Development Corporation, Rockhampton - Australia
ASTM D 1762–84 (2011) Standard test method for chemical analysis of wood Charcoal. ASTM International
ASTM D7481 (2018) Standard test methods for determining loose and tapped bulk densities of powders using a graduated cylinder. ASTM Standards 38–41
ASTM E711–87 (2004) Standard test method for gross calorific value of refuse-derived fuel by the bomb calorimeter. Annual Book of ASTM Standards
ASTM (2001) Standard test method for preparation of extractive-free wood (ASTM D1105). ASTM International
ASTM (2009) Standard test method for determination of acid-insoluble residue in biomass. Annual Book of ASTM Standards
Aysu T, Küçük MM (2014) Biomass pyrolysis in a fixed-bed reactor: Effects of pyrolysis parameters on product yields and characterization of products. Energy 64:1002–1025. https://doi.org/10.1016/j.energy.2013.11.053
Bajwa DS, Peterson T, Sharma N, Shojaeiarani J, Bajwa Sreekala G (2018) A review of densified solid biomass for energy production. Renew Sust Energ Rev 96:296–305. https://doi.org/10.1016/j.rser.2018.07.040
Berghel J, Frodeson S, Granström K et al (2013) The effects of kraft lignin additives on wood fuel pellet quality, energy use and shelf life. Fuel Process Technol 112:64–69. https://doi.org/10.1016/j.fuproc.2013.02.011
Bridgwater AV (2012) Review of fast pyrolysis of biomass and product upgrading. Bio Bioener 38:68–94. https://doi.org/10.1016/j.biombioe.2011.01.048
Chang G, Huang Y, Xie J, Yang H, Liu H, Yin X, Wu C (2016) The lignin pyrolysis composition and pyrolysis products of palm kernel shell, wheat straw, and pine sawdust. Energy Convers Manage 124:587–597. https://doi.org/10.1016/j.enconman.2016.07.038
Chang G, Shi P, Guo Y, Wang L, Wang C, Guo Q (2020) Enhanced pyrolysis of palm kernel shell wastes to bio-based chemicals and syngas using red mud as an additive. J Clean Prod 272:122847. https://doi.org/10.1016/j.jclepro.2020.122847
Coimbra MC, Jorge N (2011) Proximate composition of guariroba (Syagrus oleracea) jerivá (Syagrus romanzoffiana) and macaúba (Acrocomia aculeata) palm fruits. Food Res Int 44(7):2139–2142. https://doi.org/10.1016/j.foodres.2011.03.032
de Paula Protásio T, Trugilho PF, da Silva César AA, Napoli A, de Melo ICA, da Silva MG (2014) Babassu nut residues: potential for bioenergy use in the north and Northeast of Brazil. SpringerPlus 3:1–14. https://doi.org/10.1186/2193-1801-3-124
Dhyani V, Bhaskar T (2018) A comprehensive review on the pyrolysis of lignocellulosic biomass. Renew Energy 129:695–716. https://doi.org/10.1016/j.renene.2017.04.035
European Committee for Standardization C (2009) Solid biofuels — determination of ash content - EN 14775. 12
Falasca SL, Miranda del Fresno C, Ulberich A (2012) Possibilities for growing queen palm (Syagrus romanzoffiana) in Argentina as a biodiesel producer under semi-arid climate conditions. Int J Hydrogen Energy 37:14843–14848. https://doi.org/10.1016/j.ijhydene.2011.12.092
Gellerstedt G (2015) Softwood kraft lignin: raw material for the future. Ind Crops Prod 77:845–854. https://doi.org/10.1016/j.indcrop.2015.09.040
Goldschimid O (1971) Ultraviolet spectra. In: Sarkanen KV, Ludwig CH, editors. Lignins: occurrence, formation, structure and reactions. New York: John Wiley Interprice; 1971. 1971
Goudel F, Shibata M, Coelho CMM, Miller PRM (2013) Fruit biometry and seed germination of Syagrus romanzoffiana (Cham.) Glassm. Acta Bot Bras 27:147–154. https://doi.org/10.1590/S0102-33062013000100015
Hansted ALS, Nakashima GT, Martins MP et al (2016) Comparative analyses of fast growing species in different moisture content for high quality solid fuel production. Fuel 184:180–184. https://doi.org/10.1016/j.fuel.2016.06.071
Huang Y, Li L, Zheng A, Zhao Z, Li H (2017) Investigation into the Interactions during Staged Thermal Co-conversion of Kraft Lignin and Lignite. Energ Fuel 31:12263–12271. https://doi.org/10.1021/acs.energyfuels.7b02209
Kan T, Strezov V, Evans TJ (2016) Lignocellulosic biomass pyrolysis: a review of product properties and effects of pyrolysis parameters. Renew Sust Energ Rev 57:1126–1140. https://doi.org/10.1016/j.rser.2015.12.185
Kanaujia PK, Sharma YK, Garg MO, Tripathi D, Singh R (2014) Review of analytical strategies in the production and upgrading of bio-oils derived from lignocellulosic biomass. J Anal Appl Pyrolysis 105:55–74. https://doi.org/10.1016/j.jaap.2013.10.004
Kim SJ, Jung SH, Kim JS (2010) Fast pyrolysis of palm kernel shells: influence of operation parameters on the bio-oil yield and the yield of phenol and phenolic compounds. Bioresour Technol 101:9294–9300. https://doi.org/10.1016/j.biortech.2010.06.110
Kumar R, Strezov V, Weldekidan H, He J, Singh S, Kan T, Dastjerdi B (2020) Lignocellulose biomass pyrolysis for bio-oil production: a review of biomass pre-treatment methods for production of drop-in fuels. Renew Sust Energ Rev 123:109763. https://doi.org/10.1016/j.rser.2020.109763
Liu Z, Zhang F, Liu H, Ba F, Yan S, Hu J (2018) Pyrolysis/gasification of pine sawdust biomass briquettes under carbon dioxide atmosphere: study on carbon dioxide reduction (utilization) and biochar briquettes physicochemical properties. Bioresour Technol 249:983–991. https://doi.org/10.1016/j.biortech.2017.11.012
Liu X, Li T, Wu S, Ma H, Yin Y (2020) Structural characterization and comparison of enzymatic and deep eutectic solvents isolated lignin from various green processes: toward lignin valorization. Bioresour Technol 310:123460. https://doi.org/10.1016/j.biortech.2020.123460
Moreira MAC, Payret Arrúa ME, Antunes AC, Fiuza TER, Costa BJ, Weirich Neto PH, Antunes SRM (2013) Characterization of Syagrus romanzoffiana oil aiming at biodiesel production. Ind Crops Prod 48:57–60. https://doi.org/10.1016/j.indcrop.2013.04.006
Ordoñez-Frías EJ, Azamar-Barrios JA, Mata-Zayas E, Silván-Hernández O, Pampillón-González L (2020) Bioenergy potential and technical feasibility assessment of residues from oil palm processing: a case study of Jalapa, Tabasco. Mexico Bio Bioener 142:105668. https://doi.org/10.1016/j.biombioe.2020.105668
Parikh J, Channiwala SA, Ghosal GK (2005) A correlation for calculating HHV from proximate analysis of solid fuels. Fuel 84:487–494. https://doi.org/10.1016/j.fuel.2004.10.010
Paris Agreement (2015). United Nations Framework Convention on Climate Change 1
Patel RN, Bandyopadhyay S, Ganesh A (2011) Extraction of cardanol and phenol from bio-oils obtained through vacuum pyrolysis of biomass using supercritical fluid extraction. Energy 36:1535–1542. https://doi.org/10.1016/j.energy.2011.01.009
Rogelj J, Shindell D, Jiang K, Fifita S (2018) IPCC 2018, cap2. IPCC
Ru B, Wang S, Dai G, Zhang L (2015) Effect of torrefaction on biomass physicochemical characteristics and the resulting pyrolysis behavior. Energ Fuel 29:5865–5874. https://doi.org/10.1021/acs.energyfuels.5b01263
Sabil KM, Aziz MA, Lal B, Uemura Y (2013) Effects of torrefaction on the physiochemical properties of oil palm empty fruit bunches, mesocarp fiber and kernel shell. Bio Bioener 56:351–360. https://doi.org/10.1016/j.biombioe.2013.05.015
Salema AA, Afzal MT, Bennamoun L (2017) Pyrolysis of corn stalk biomass briquettes in a scaled-up microwave technology. Bioresour Technol 233:353–362. https://doi.org/10.1016/j.biortech.2017.02.113
Santos VO, Queiroz LS, Araujo RO et al (2020) Pyrolysis of acai seed biomass: Kinetics and thermodynamic parameters using thermogravimetric analysis. Bioresour Technol Rep 12:100553. https://doi.org/10.1016/j.biteb.2020.100553
Schorr D, Diouf PN, Stevanovic T (2014) Evaluation of industrial lignins for biocomposites production. Ind Crops Prod 52:65–73. https://doi.org/10.1016/j.indcrop.2013.10.014
Sette CR, Hansted ALS, Novaes E et al (2018) Energy enhancement of the eucalyptus bark by briquette production. Ind Crops Prod 122:209–213. https://doi.org/10.1016/j.indcrop.2018.05.057
Setter C, Oliveira TJP (2022) Evaluation of the physical-mechanical and energy properties of coffee husk briquettes with kraft lignin during slow pyrolysis. Renew Energy 189:1007–1019. https://doi.org/10.1016/j.renene.2022.03.077
Setter C, Costa KLS, de Oliveira TJP, Mendes RF (2020) The effects of kraft lignin on the physicomechanical quality of briquettes produced with sugarcane bagasse and on the characteristics of the bio-oil obtained via slow pyrolysis. Fuel Process Technol 210:106561. https://doi.org/10.1016/j.fuproc.2020.106561
Setter C, Silva FTM, Assis MR, Ataíde CH, Trugilho PF, Oliveira TJP (2020b) Slow pyrolysis of coffee husk briquettes: characterization of the solid and liquid fractions. Fuel 261:116420. https://doi.org/10.1016/j.fuel.2019.116420
Setter C, Ataíde CH, Mendes RF, de Oliveira TJP (2021) Influence of particle size on the physico-mechanical and energy properties of briquettes produced with coffee husks. Environ Sci Pollut Res 28:8215–8223. https://doi.org/10.1007/s11356-020-11124-0
Stevens J, Gardner DJ (2010) Enhancing the fuel value of wood pellets with the addition of lignin. Wood Fiber Sci 42:439–443
Uddin MN, Daud WMAW, Abbas HF (2014) Effects of pyrolysis parameters on hydrogen formations from biomass: a review. RSC Adv 4:10467–10490. https://doi.org/10.1039/c3ra43972k
Wahid FRAA, Saleh S, Samad NAFA (2017) Estimation of higher heating value of torrefied palm oil wastes from proximate analysis. Energy Procedia 138:307–312. https://doi.org/10.1016/j.egypro.2017.10.102
Wang S, Guo X, Wang K, Luo Z (2011) Influence of the interaction of components on the pyrolysis behavior of biomass. J Anal Appl Pyrolysis 91:183–189. https://doi.org/10.1016/j.jaap.2011.02.006
Wang Q, Han K, Gao J et al (2017a) The pyrolysis of biomass briquettes: effect of pyrolysis temperature and phosphorus additives on the quality and combustion of bio-char briquettes. Fuel 199:488–496. https://doi.org/10.1016/j.fuel.2017.03.011
Wang S, Dai G, Yang H, Luo Z (2017b) Lignocellulosic biomass pyrolysis mechanism: a state-of-the-art review. Prog Energy Combust Sci 62:33–86. https://doi.org/10.1016/j.pecs.2017.05.004
Ward CR, Li Z, Gurba LW (2008) Comparison of elemental composition of macerals determined by electron microprobe to whole-coal ultimate analysis data. Int J of Coal Geol 75:157–165. https://doi.org/10.1016/j.coal.2008.05.010
Yank A, Ngadi M, Kok R (2016) Physical properties of rice husk and bran briquettes under low pressure densification for rural applications. Bio Bioener 84:22–30. https://doi.org/10.1016/j.biombioe.2015.09.015
Yildiz G, Ronsse F, Venderbosch R, van Duren R, Kersten SRA, Prins W (2015) Effect of biomass ash in catalytic fast pyrolysis of pine wood. Appl Catal B 168–169:203–211. https://doi.org/10.1016/j.apcatb.2014.12.044
Yu Y, Chua YW, Wu H (2016) Characterization of pyrolytic sugars in bio-oil produced from biomass fast pyrolysis. Energ Fuel 30:4145–4149. https://doi.org/10.1021/acs.energyfuels.6b00464
Zhang G, Sun Y, Xu Y (2018) Review of briquette binders and briquetting mechanism. Renew Sust Energ Rev 82:477–487. https://doi.org/10.1016/j.rser.2017.09.072
Acknowledgements
The authors acknowledge the Brazilian institutions CAPES (Federal Agency for the Support and Improvement of Higher Education), CNPq (National Council for Scientific and Technological Development), and FAPEMIG (Minas Gerais State Research Foundation) for their support of this research and biomass energy platform of the Forest Products Laboratory (LPF) of the Brazilian Forest Service.
Funding
This study was supported by FAPEMIG APQ-00086–18 (Minas Gerais State Research Foundation).
Author information
Authors and Affiliations
Contributions
Pedro Paulo Dunice van Els, Carine Setter, and Tiago José Pires de Oliveira were responsible for the study and contributed to the study’s conception and design. Material preparation and data collection were performed by Pedro Paulo Dunice van Els. All authors contributed to the analysis and interpretation of data. Pedro Paulo Dunice Van Els wrote the first draft of the manuscript. All authors contributed to manuscript revision, read, and approved the submitted version.
Corresponding author
Ethics declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Ta Yeong Wu
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
van Els, P.P.D., Setter, C. & de Oliveira, T.J.P. Evaluation of Queen Palm residues and kraft lignin in the production of biofuels using densification and slow pyrolysis technology. Environ Sci Pollut Res 29, 90011–90022 (2022). https://doi.org/10.1007/s11356-022-22075-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-022-22075-z