Abstract
Iodine value (IV) is an indicator to evaluate the degree of unsaturation (DU) of biodiesel. It reflects the biodiesel degradation and oxidation stability (OS) and also has an effect on viscosity, low-temperature flow properties (LTFP), and the combustion performance. To construct a theoretical system for the simultaneous optimization of LTFP and OS of biodiesel using IV, 52 measured experimental data are used to investigate the qualitative and quantitative relationship between IV and biodiesel composition. The relationships between biodiesel physicochemical properties and IV are investigated in this work. The qualitative analysis shows that the poly-unsaturated fatty acid methyl esters (FAMEs) contribute to an increase in IV, whereas saturated and mono-unsaturated FAMEs decrease IV. Multiple linear regression (MLR) and artificial neural network (ANN) are used to estimate IV from FAMEs. The correlation coefficient, root mean squared error (RMSE), and mean absolute percentage error (MAPE) are respectively 0.976, 2.45, and 1.76% for the MLR model and 0.983, 2.14, and 1.57% for the back propagation neural network (BPNN) model; these values indicate the high accuracy of these methods. The performances of the proposed models were compared with three existing IV prediction models and validated by another databank. The results indicate that the application of the developed BPNN model is better and more comprehensive. Additionally, a preliminary conclusion is that biodiesel with a low percentage of both long-chain saturated and poly-unsaturated FAMEs can have solidifying point (SP) and OS in the proper range. Biodiesel with a low IV is generally more combustible and efficient.
Similar content being viewed by others
Availability of data and materials
All data generated or analyzed during this study are included in this published article.
Abbreviations
- ASD:
-
Abrasive spot diameter
- ANN:
-
Artificial neural network
- BPNN:
-
Back propagation neural network
- CME:
-
Canola methyl ester
- CN:
-
Cetane number
- COSME:
-
Camellia oleosa seed methyl ester
- CSME:
-
Cottonseed methyl ester
- FAMEs:
-
Fatty acid methyl esters
- HME:
-
Hogwash oil methyl ester
- IV:
-
Iodine value
- JME:
-
Jatropha methyl ester
- Kv:
-
Kinematic viscosity
- LTFP:
-
Low-temperature flow properties
- MAPE:
-
Mean absolute percentage error
- MLR:
-
Multiple linear regression
- MME:
-
Maize methyl ester
- MSE:
-
Mean squared error
- OME:
-
Olive methyl ester
- OS:
-
Oxidation stability
- OSME:
-
Oryza sativa methyl ester
- PME:
-
Palm methyl ester
- PNME:
-
Peanut methyl ester
- RME:
-
Rapeseed methyl ester
- r:
-
Relevancy factor
- RMSE:
-
Root mean squared error
- RSME:
-
Rubber seed methyl ester
- SBME:
-
Soya bean methyl ester
- SP:
-
Solidifying point
- SSME:
-
Sunflower seed methyl ester
- SV:
-
Saponification value
- ST:
-
Surface tension
- DU:
-
Degree of unsaturation
- IDU:
-
Improved degree of unsaturation
References
Agarwal M, Singh K, Chaurasia SP (2010) Prediction of biodiesel properties from fatty acid composition using linear regression and ANN techniques. Indian Chem Eng 52:347–361. https://doi.org/10.1080/00194506.2010.616325
Almutairi AW (2020) Effects of nitrogen and phosphorus limitations on fatty acid methyl esters and fuel properties of Dunaliella salina. Environ Sci Pollut Res 27:32296–32303. https://doi.org/10.1007/s11356-020-08531-8
Alviso D, Artana G, Duriez T (2020) Prediction of biodiesel physico-chemical properties from its fatty acid composition using genetic programming. Fuel 264:1–12. https://doi.org/10.1016/j.fuel.2019.116844
AOCS Official Method Cd 1-25 (1998) Iodine value of fats and oils Wijs method. In: Firestone D (ed) Offificial methods and recommended practices of the American oils Chemists’ Society. Champaign (IL), AOCS
Atabani AE, Mahlia TMI, Masjuki HH, Anjum Badruddin I, Wan Yussof H, Chong WT, Lee KT (2013a) A comparative evaluation of physical and chemical properties of biodiesel synthesized from edible and non-edible oils and study on the effect of biodiesel blending. Energy 58:296–304. https://doi.org/10.1016/j.energy.2013.05.040
Atabani AE, Silitonga AS, Ong HC, Mahlia TMI, Masjuki HH, Badruddin IA, Fayaz H (2013b) Non-edible vegetable oils: a critical evaluation of oil extraction, fatty acid compositions, biodiesel production, characteristics, engine performance and emissions production. Renew Sust Energ Rev 18:211–245. https://doi.org/10.1016/j.rser.2012.10.013
Barradas Filho AO, Barros AKD, Labidi S, Viegas IMA, Marques DB, Romariz ARS, de Sousa RM, Marques ALB, Marques EP (2015) Application of artificial neural networks to predict viscosity, iodine value and induction period of biodiesel focused on the study of oxidative stability. Fuel 145:127–135. https://doi.org/10.1016/j.fuel.2014.12.016
Benjumea P, Agudelo JR, Agudelo AF (2011) Effect of the degree of unsaturation of biodiesel fuels on engine performance, combustion characteristics, and emissions. Energy Fuels 25:77–85. https://doi.org/10.1021/ef101096x
Bureau EaDRIoXPA (1999) Method for determination of surface and interfacial tension. Industry Standard - Petroleum, pp. 26P.;A4
Caldeira C, Freire F, Olivetti EA, Kirchain R (2017) Fatty acid based prediction models for biodiesel properties incorporating compositional uncertainty. Fuel 196:13–20. https://doi.org/10.1016/j.fuel.2017.01.074
Dunn RO (2019) Correlating the cold filter plugging point to concentration and melting properties of fatty acid methyl ester (biodiesel) admixtures. Energy Fuels 34:501–515. https://doi.org/10.1021/acs.energyfuels.9b03311
EN 14214 (2003) Automotive fuels. Fatty acid methyl esters (FAME) for diesel engines. Requirements and test methods
Folayan AJ, Anawe PAL, Aladejare AE, Ayeni AO (2019) Experimental investigation of the effect of fatty acids configuration, chain length, branching and degree of unsaturation on biodiesel fuel properties obtained from lauric oils, high-oleic and high-linoleic vegetable oil biomass. Energy Rep 5:793–806. https://doi.org/10.1016/j.egyr.2019.06.013
Freitas SVD, Pratas MJ, Ceriani R, Lima AS, Coutinho JAP (2011) Evaluation of predictive models for the viscosity of biodiesel. Energy Fuels 25:352–358. https://doi.org/10.1021/ef101299d
Freitasa ON, Rialb RC, Cavalheiroa LF, Barbosaa JMS, Nazárioa CED, Viana LH (2019) Evaluation of the oxidative stability and cold filter plugging point of soybean methyl biodiesel bovine tallow methyl biodiesel blends. Ind Crop Prod 140. https://doi.org/10.1016/j.indcrop.2019.111667
Giakoumis EG (2013) A statistical investigation of biodiesel physical and chemical properties, and their correlation with the degree of unsaturation. Renew Energy 50:858–878. https://doi.org/10.1016/j.renene.2012.07.040
Giakoumis E, Sarakatsanis C (2019) A comparative assessment of biodiesel cetane number predictive correlations based on fatty acid composition. Energies 1210.3390/en12030422
Gopinath A, Puhan S, Nagarajan G (2009) Theoretical modeling of iodine value and saponification value of biodiesel fuels from their fatty acid composition. Renew Energy 34:1806–1811. https://doi.org/10.1016/j.renene.2008.11.023
Gopinath A, Sairam K, Velraj R, Kumaresan G (2014) Effects of the properties and the structural configurations of fatty acid methyl esters on the properties of biodiesel fuel: a review. Proc Inst Mech Eng Part D-J Automob Eng 229:357–390. https://doi.org/10.1177/0954407014541103
Goto S (2010) Biodiesel fuel trade handbook:2010
Gulum M, Yesilyurt MK, Bilgin A (2020) The modeling and analysis of transesterification reaction conditions in the selection of optimal biodiesel yield and viscosity. Environ Sci Pollut Res 27:10351–10366. https://doi.org/10.1007/s11356-019-07473-0
Hoekman SK, Broch A, Robbins C, Ceniceros E, Natarajan M (2012) Review of biodiesel composition, properties, and specifications. Renew Sust Energ Rev 16:143–169. https://doi.org/10.1016/j.rser.2011.07.143
Holman JP (2001) Experimental methods for engineers, seventh edn. McGraw-Hill International Edition, New Yo rk isbn: 9780071181655
Huang Y, Li F, Bao G, Wang W, Wang H (2020) Estimation of kinematic viscosity of biodiesel fuels from fatty acid methyl ester composition and temperature. J Chem Eng Data 65:2476–2485. https://doi.org/10.1021/acs.jced.9b01127
Huang X, Wang H, Luo W, Xue S, Hayat F, Gao Z (2021) Prediction of loquat soluble solids and titratable acid content using fruit mineral elements by artificial neural network and multiple linear regression. Sci Hortic 278:109873. https://doi.org/10.1016/j.scienta.2020.109873
Kalayasiri P, Jeyashoke N, Krisnangkura K (1996) Survey of seed oils for use as diesel fuels. J Am Oil Chem Soc 73:471–474
Karonis D, Zahos-Siagos I, Filimon D, Vasileiou F (2017) A multivariate statistical analysis to evaluate and predict ignition quality of marine diesel fuel distillates from their physical properties. Fuel Process Technol 166:299–311. https://doi.org/10.1016/j.fuproc.2017.06.021
Knothe G (2002) Structure indices in fa chemistry. How relevant is the iodine value? J Am Oil Chem Soc 79:847–854
Knothe G, Razon LF (2017) Biodiesel fuels. Prog Energy Combust Sci 58:36–59. https://doi.org/10.1016/j.pecs.2016.08.001
Longo GA, Mancin S, Righetti G, Zilio C, Ortombina L, Zigliotto M (2020) Application of an artificial neural network (ANN) for predicting low-GWP refrigerant boiling heat transfer inside brazed plate heat exchangers (BPHE). Int J Heat Mass Transf 160:120204. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120204
Lv S, Zhang J, Ni H, Wang X, Zhu Y, Chen L (2020) Study on the coupling relationship of low temperature fluidity and oxidation stability of biodiesel. Appl Sci. https://doi.org/10.3390/app10051757
Mairizal AQ, Awad S, Priadi CR, Hartono DM, Moersidik SS, Tazerout M, Andres Y (2020) Experimental study on the effects of feedstock on the properties of biodiesel using multiple linear regressions. Renew Energy 145:375–381. https://doi.org/10.1016/j.renene.2019.06.067
Materials ASfTa (1986) Standard test method for kinematic viscosity of transparent and opaque liquids (and the calculation of dynamic viscosity)
Meng X, Jia M, Wang T (2014) Neural network prediction of biodiesel kinematic viscosity at 313K. Fuel 121:133–140. https://doi.org/10.1016/j.fuel.2013.12.029
Miraboutalebi SM, Kazemi P, Bahrami P (2016) Fatty acid methyl ester (FAME) composition used for estimation of biodiesel cetane number employing random forest and artificial neural networks: a new approach. Fuel 166:143–151. https://doi.org/10.1016/j.fuel.2015.10.118
Mishra S, Anand K, Mehta PS (2016) Predicting the cetane number of biodiesel fuels from their fatty acid methyl ester composition. Energy Fuels 30:10425–10434. https://doi.org/10.1021/acs.energyfuels.6b01343
Monirul IM, Masjuki HH, Kalam MA, Mosarof MH, Zulkifli NWM, Teoh YH, How HG (2016) Assessment of performance, emission and combustion characteristics of palm, jatropha and Calophyllum inophyllum biodiesel blends. Fuel 181:985–995. https://doi.org/10.1016/j.fuel.2016.05.010
Nguyen K-B, Dan T, Asano I (2015) Effect of double injection on combustion, performance and emissions of Jatropha water emulsion fueled direct-injection diesel engine. Energy 80:746–755. https://doi.org/10.1016/j.energy.2014.12.033
Ni Z, Li F, Wang H, Wang S, Gao S, Zhou L (2020a) Antioxidative performance and oil-soluble properties of conventional antioxidants in rubber seed oil biodiesel. Renew Energy 145:93–98. https://doi.org/10.1016/j.renene.2019.04.045
Ni Z, Zhai Y, Li F, Wang H, Yang K, Wang B, Chen Y (2020b) Reaction kinetics analysis of branched-chain alkyl esters of palmitic acid and cold flow properties. Renew Energy 147:719–729. https://doi.org/10.1016/j.renene.2019.08.138
Phommavongsa D (2012) The relationship between compositions, fuel properties, combustion and emission characteristics of biodiesel fuels, The 6th AUN/SEED-Net Regional Conference in Energy Engineering
Piloto-Rodríguez R, Sánchez-Borroto Y, Lapuerta M, Goyos-Pérez L, Verhelst S (2013) Prediction of the cetane number of biodiesel using artificial neural networks and multiple linear regression. Energy Conv Manag 65:255–261. https://doi.org/10.1016/j.enconman.2012.07.023
Ramalingam K, Kandasamy A, Balasubramanian D, Palani M, Subramanian T, Varuvel EG, Viswanathan K (2020) Forcasting of an ANN model for predicting behaviour of diesel engine energised by a combination of two low viscous biofuels. Environ Sci Pollut Res 27:24702–24722. https://doi.org/10.1007/s11356-019-06222-7
Ramos MJ, Fernandez CM, Casas A, Rodriguez L, Perez A (2009) Influence of fatty acid composition of raw materials on biodiesel properties. Bioresour Technol 100:261–268. https://doi.org/10.1016/j.biortech.2008.06.039
Razavi R, Bemani A, Baghban A, Mohammadi AH, Habibzadeh S (2019) An insight into the estimation of fatty acid methyl ester based biodiesel properties using a LSSVM model. Fuel 243:133–141. https://doi.org/10.1016/j.fuel.2019.01.077
RD 61/2006. (2006) Ministerio de Industria, Turismo y Comercio. BOE 41, in Spanish
Rizwanul Fattah IM, Masjuki HH, Kalam MA, Wakil MA, Ashraful AM, Shahir SA (2014) Experimental investigation of performance and regulated emissions of a diesel engine with Calophyllum inophyllum biodiesel blends accompanied by oxidation inhibitors. Energy Conv Manag 83:232–240. https://doi.org/10.1016/j.enconman.2014.03.069
Sajjadi B, Raman AAA, Arandiyan H (2016) A comprehensive review on properties of edible and non-edible vegetable oil-based biodiesel: composition, specifications and prediction models. Renew Sust Energ Rev 63:62–92. https://doi.org/10.1016/j.rser.2016.05.035
Sakthivel R, Ramesh K, Purnachandran R, Mohamed Shameer P (2018) A review on the properties, performance and emission aspects of the third generation biodiesels. Renew Sust Energ Rev 82:2970–2992. https://doi.org/10.1016/j.rser.2017.10.037
Serrano M, Oliveros R, Sánchez M, Moraschini A, Martínez M, Aracil J (2014) Influence of blending vegetable oil methyl esters on biodiesel fuel properties: oxidative stability and cold flow properties. Energy 65:109–115. https://doi.org/10.1016/j.energy.2013.11.072
Sierra-Cantor JF, Guerrero-Fajardo CA (2017) Methods for improving the cold flow properties of biodiesel with high saturated fatty acids content: a review. Renew Sust Energ Rev 72:774–790. https://doi.org/10.1016/j.rser.2017.01.077
Singh D, Sharma D, Soni SL, Sharma S, Kumari D (2019) Chemical compositions, properties, and standards for different generation biodiesels: a review. Fuel 253:60–71. https://doi.org/10.1016/j.fuel.2019.04.174
Uriate FA (2010) Biofuels from plant oils: a book for practitioners and professionals involved in biofuels, to promote a better and more accurate understanding of the nature, production and use of biofuels from plant oils. National Academy of Science and Technology. Government of Japan. Japan ASEAN Solidarity Fund
Viegas IMA, Barradas Filho AO, Marques EP, Pereira CF, Marques ALB (2018) Oxidative stability of biodiesel by mixture design and a four-component diagram. Fuel 219:389–398. https://doi.org/10.1016/j.fuel.2018.01.124
Wang L, Yu H, He X, Liu R (2012) Influence of fatty acid composition of woody biodiesel plants on the fuel properties. J Fuel Chem Technol 40:397–404. https://doi.org/10.1016/s1872-5813(12)60018-8
Wang C, Ye Z, Bi H (2021) Exploring the influence of contributing factors and impact degree on bus emissions in real-world conditions. Environ Sci Pollut Res10.1007/s11356-021-12945-3
Xue Z, Wu D, Shen LL, Lu J, Zheng CH, Li P, Xie JW, Wang JB, Lin JX, Chen QY, Cao LL, Lin M, Tu RH, Huang ZN, Lin JL, Zheng HL, Huang C (2020) 119MO Application of an artificial neural network for predicting the chemotherapy benefit of patients with gastric cancer after radical surgery. Ann Oncol 31:S1289–S1290. https://doi.org/10.1016/j.annonc.2020.10.140
Zheng Y, Shadloo MS, Nasiri H, Maleki A, Karimipour A, Tlili I (2020) Prediction of viscosity of biodiesel blends using various artificial model and comparison with empirical correlations. Renew Energy 153:1296–1306. https://doi.org/10.1016/j.renene.2020.02.087
Acknowledgements
We thank Mr. Bin Li (University of Texas Rio Grande Valley, USA) for his language assistance during the preparation of this manuscript. We also thank Dr. Qingtai Xiao (Kunming University of Science and Technology, China) for providing suggestions during the submission process.
Funding
The authors appreciate the financial supports provided by the National Natural Science Foundation of China (51766007), National Natural Science Foundation of Yunnan Province (2018FB092), and National Natural Science Foundation of China-Yunnan Joint Fund (U1602272).
Author information
Authors and Affiliations
Contributions
YH performed the iodine value examination of the biodiesels and analyzed and interpreted the relationship between fatty acid methyl ester and iodine value and was a major contributor in writing the manuscript. FL conceptualized the methodology. GB reviewed and revised the manuscript, ML provided the language help. HW supervised the whole process. All authors read and approved the final manuscript.
Corresponding authors
Ethics declarations
Ethics approval and consent to participate
Not applicable
Consent for publication
Not applicable
Competing interests
The authors declare no competing interests.
Additional information
Responsible Editor: Ta Yeong Wu
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Huang, Y., Li, F., Bao, G. et al. Qualitative and quantitative analysis of the influence of biodiesel fatty acid methyl esters on iodine value. Environ Sci Pollut Res 29, 2432–2447 (2022). https://doi.org/10.1007/s11356-021-15762-w
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-021-15762-w