Skip to main content
Log in

Research on the effects of diesel engine exhaust transport distance on particulate microstructure

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

This study aims to reveal the evolutionary process of particles during the diesel exhaust transport process and to further understand the effects of diesel exhaust transport distance (DET) on a particulate microstructure. Specifically, the micromorphological, particle size distribution, and aggregate characteristics of particles as well as the variation of the structural characteristics of elementary carbon particles (ECPs) as DET changed were examined using an engine exhaust particle size spectrometer, a high-resolution transmission electron microscopy system, and a small-angle X-ray scattering system. The results show the following: As DET increased, the chains gradually lengthened, the extent of accumulation and stacking increased, and a number of clusters gradually rose. The average particle diameter increased from 23.1 nm at 0 m to 92.7 nm at 3 m. In addition, as DET increased, the number of accumulation-mode particles, the number of folded, curved carbon layers in the inner core of carbon particles, and the disorderliness of carbon layers in the outer shell of carbon particles all increased. Moreover, the boundary between the inner core and the outer shell became increasingly obscure. As DET increased, there was a gradual decrease in the difference in electron density between particles, and the fractal dimensionality of the distribution, average cross-sectional size, radius of gyration, and axial length of pores were, respectively, 33.3%, 40%, 38.2%, and 50.3% less at 3 m than at 0 m. Besides that, the number of small (< 3 nm) pores gradually increased, and the number of large (> 10 nm) pores gradually decreased. Overall, as DET increased, pore size and number decreased. There was a gradual increase in the number of folded and curved carbon layers in the inner core of ECPs and an increase in the disorderliness of carbon layers in their outer shell as DET increased. Furthermore, the boundary between the inner core and the outer shell became increasingly obscure as DET increased. The crystallite size of ECPs decreased from 1.365 nm at 0 m to 1.098 nm at 3 m. This suggests that the number of continuously arranged carbon atoms decreased, the arrangement of carbon atoms was more disorderly, and the degree of graphitization decreased. As DET increased, there was a gradual increase in the interlayer spacing and curvature of ECPs. This suggests that increasing DET led to a more disorderly distribution of electron orbitals inside the carbon layers, less electron resonance stability in the carbon layers, greater oxidative activity of ECPs, and greater inherent oxidative capacity of particles.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

.Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  • Bedjanian Y, Nguyen ML, Le Bras G (2010) Kinetics of the reactions of soot surface-bound polycyclic aromatic hydrocarbons with the OH radicals[J]. Atmos Environ 44:1754–1760

    Article  CAS  Google Scholar 

  • Chu H, Weiwei H, Gao W et al (2019) Effect of methane addition to ethylene on the morphology and size distribution of soot in a laminar co-flow diffusion flame. Energy 166(1):392–400

    Article  CAS  Google Scholar 

  • Dong S, Chonglin S, Guobin Z et al (2008) Investigation on the numbers and size distributions of in-cylinder particulates for a diesel engine. Trans CSICE 26(1):24–28

    CAS  Google Scholar 

  • Dresselhaus MS, Jorio A, Hofmann M, Dresselhaus G, Saito R (2010) Perspectives on carbon nanotubes and graphene Raman spectroscopy. Nano Lett 10(3):751–758

    Article  CAS  Google Scholar 

  • Fang J, Meng Z, Li J, Du Y, Qin Y, Jiang Y et al (2019) The effect of operating parameters on regeneration characteristics and particulate emission characteristics of diesel particulate filters. Appl Therm Eng 148:860–867

    Article  CAS  Google Scholar 

  • Feng R, Zheng H-j (2019) Evidence for regional heterogeneous atmospheric particulate matter distribution in China: implications for air pollution control. Environ Chem Lett 2:549–558

    Google Scholar 

  • Hu J, Jathar S, Zhang H, Ying Q, Chen SH, Cappa CD et al (2017) Long-term particulate matter modeling for health effect studies in California - part 2: concentrations and sources of ultrafine organic aerosols. Atmos Chem Phys 17(8):5379–5391

    Article  CAS  Google Scholar 

  • Jingmin W, Yang F, Keke C (2019) Regional carbon emission evolution mechanism and its prediction approach: a case study of Hebei, China. Environ Sci Pollut Res 26(28):28884–28897

    Article  CAS  Google Scholar 

  • Ko J, Myung CL, Park S (2019) Impacts of ambient temperature, DPF regeneration, and traffic congestion on NOx emissions from a Euro 6-compliant diesel vehicle equipped with an LNT under real-world driving conditions. Atmos Environ 200:1–14

    Article  CAS  Google Scholar 

  • Li Z, Jihong S, Junping Z et al (2000) Study of sol structures by SAXS. Acta Phys Sin 49(4):775–780

    CAS  Google Scholar 

  • Meng Z, Jing Z, Chao C, Yan Y (2017) A numerical investigation of the diesel particle filter regeneration process under temperature pulse conditions. Heat Mass Transf 53(5):1589–1602

    Article  CAS  Google Scholar 

  • Meng Z, Liang K, Jia F (2019) Laminar burning velocities of iso-octane, toluene, 1-hexene, ethanol and their quaternary blends at elevated temperatures and pressures. Fuel 237:630–636

    Article  CAS  Google Scholar 

  • Piqiang T, Diming L, Hu Z (2010) Nucleation mode particles from a diesel engine with biodiesel fuel. J Eng Thermophys 31(7):1231–1234

    Google Scholar 

  • Tighe CJ, Twigg MV, Hayhurst AN, Dennis JS (2012) The kinetics of oxidation of diesel soots. Combust Flame 159:77–90

    Article  CAS  Google Scholar 

  • Tighe CJ, Twigg MV, Hayhurst AN, Dennis JS (2016) The kinetics of oxidation of diesel soots and a carbon black (Printex U) by O 2 with reference to changes in both size and internal structure of the spherules during burnout. Carbon. 107:20–35

    Article  CAS  Google Scholar 

  • Tsolakis A (2006) Effects on particle size distribution from the diesel engine operating on RME. Energy Fuel 20(4):1418–1424

    Article  CAS  Google Scholar 

  • Wang B, Long J, Weiyue F et al (2007) Characterization of size and morphology of ZnO and Fe2O3 nanoparticles in dispersive media by SAXS. Nuclear Techniques (NT) 30(7):576–579

    Google Scholar 

  • Wang X, Yunshan G, Tan J et al (2010) Research on PM form of diesel engine fueled with biodiesel based on size distribution. Vehicle & Power Technology 4:52–57

    Google Scholar 

  • Wang X, Wang Z, Peiyong N (2013) Soot microstructure analysis by small angle X-ray scattering. Chinese Internal Combustion Engine Engineering (CICEE) 34(2):58–61

    Google Scholar 

  • Wei D, Hu Q, Tengyu L, Wang X, George C (2017) Primary particulate emissions and secondary organic aerosol (soa) formation from idling diesel vehicle exhaust in China. Sci Total Environ 593:462–469

    Google Scholar 

  • Yan G, Qiang T, Chaoqiang H et al (2012) A small angle X-rat scattering study of micro-defects in thermally treated HMX. Acta Phys Sin 61(13):1–7

    Google Scholar 

  • Zhang H, Pereiraa O, Legrosa G et al (2019) Structure-reactivity study of model and biodiesel soot in model DPF regeneration conditions. Fuel 239:373–386

    Article  CAS  Google Scholar 

  • Zhao Y, Wang Z, Ruina L et al (2016) Microstructures analysis of methanol/diesel combustion particle based on fractal theory. Chinese Internal Combustion Engine Engineering (CICEE) 37(2):33–37

    Google Scholar 

  • Zhao Y, Xu G, Mingdi L et al (2018) The evolution of the micro-morphology and micro-structure of particles from diesel engine in combination with exhaust gas recirculation. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects 40(7):805–820

    Article  CAS  Google Scholar 

  • Zhu J, Lee KO, Yozgatligil A et al (2006) Effects of engine operating conditions on morphology, microstructure, and fractal geometry of light-duty diesel engine articulates. Proc Combust Inst 30(2):2781–2789

    Article  CAS  Google Scholar 

Download references

Funding

This study was financially supported by the National Natural Science Foundation of China (Grant No. 51506011), the Natural Science Foundation of Jiangsu Province (No. BK20160406), the Natural Science Research Project of Jiangsu Higher Education Institutions (18KJB470001), and the Postdoctoral Research Funding Project of Jiangsu Province (2018K104C).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yang Zhao.

Additional information

Responsible Editor: Philippe Garrigues

Publisher’s note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhao, Y., Li, M., Xu, G. et al. Research on the effects of diesel engine exhaust transport distance on particulate microstructure. Environ Sci Pollut Res 28, 564–573 (2021). https://doi.org/10.1007/s11356-020-10529-1

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-020-10529-1

Keywords

Navigation