Abstract
The leachate (pH = 14) from alumina production changes the mechanical properties of red clay, and the shear strength parameters of the system vary due to the multiple-dimensional interactions of the microscopic parameters. In this paper, the alumina production liquid and the concentrations of the NaOH solution were designed to contaminate the red clay during 80 days. The cohesion and friction angle of the alkaline-contaminated red clay were obtained from direct shear tests. Through qualitative and quantitative analyses using scanning electron microscopy (SEM), the microstructure was observed. Based on the rock engineering systems (RES) theory, interactions among microscopic parameters were analysed, and the relationships between shear strength parameters and microscopic parameters of alkaline-contaminated red clay were established. Results show that both of the cohesion and friction angle of alkaline-contaminated red clay are increased in general; the adsorption in alumina production liquid and dispersing effect of 0.7% NaOH concentration are noticeable, and the interactions of the microscopic parameters are intense; the ratio of the intra-aggregate pore number, the probability distribution index and the number of particles can significantly influence cohesion; the particle morphology fractal dimension, aspect and probability entropy have a severe effect on friction angle. This work is expected to serve as a reference for future research on the relationship between macroscopic properties and microcosmic structure of soil.
Similar content being viewed by others
References
Anandarajah A, Kuganenthira N (1995) Some aspects of fabric anisotropy of soil. Geotechnique 45(1):69–81. https://doi.org/10.1680/geot.1995.45.1.69
Chavali RVP, Vindula SK, Hari PRP, Babu A, Pillai RJ (2016) Swelling behavior of kaolinitic clays contaminated with alkali solutions: a micro-level study. Appl Clay Sci 135:575–582. https://doi.org/10.1016/j.clay.2016.10.045
Chen YZ, Zhou WH, Liu F, Yi S, Geng X (2019) Microstructure and morphological characterization of lead- contaminated clay with nanoscale zero- valent iron (nZVI) treatment. Eng Geol 256(5):84–92. https://doi.org/10.1016/j.enggeo.2019.05.001
Chertkov VY (2008) The physical effects of an intra-aggregate structure on soil shrinkage. Geoderma 146(1–2):147–156. https://doi.org/10.1016/j.geoderma.2008.05.011
China Water Power Press (1999) Standard for soil test method (National Standards of the People’s Republic of China, GB/T 50123-1999), Beijing (in Chinese)
Cox M, Budhu M (2008) A practical approach to grain shape quantification. Eng Geol 96(1):1–16. https://doi.org/10.1016/j.enggeo.2007.05.005
Cuisinier O, Deneele D, Masrouri F (2009) Shear strength behaviour of compacted clayey soils percolated with an alkaline solution. Eng Geol 108(3–4):177–188. https://doi.org/10.1016/j.enggeo.2009.07.012
Editorial Committee of Handbook of engineering geology (2017) Handbook of engineering geology, 5th edn. China Architecture & Building Press, Beijing
Ferentinou M, Fakir M (2018) Integrating rock engineering systems device and artificial neural networks to predict stability conditions in an open pit. Eng Geol 246:293–309. https://doi.org/10.1016/j.enggeo.2018.10.010
Guizhou Branch of Aluminum Corporation of China (GBAC) (2013a) Method for determination of Al2O3 and total alkali content (Q/CHALCO GZ 4106 B03 026-2013), Guiyang (in Chinese)
Guizhou Branch of Aluminum Corporation of China (GBAC) (2013b) Method for determination of Na2Ok (Q/CHALCO GZ 4106 B03 027-2013), Guiyang (in Chinese)
Huang RQ, Huang J, Ju NP, Li YR (2013) Automated tunnel rock classification using rock engineering systems. Eng Geol 156:20–27. https://doi.org/10.1016/j.enggeo.2013.01.006
Hudson JA (1992) Rock engineering systems theory and practice. Ellis Horwood Limited, London
Hudson JA (2013) A review of rock engineering systems (RES) applications over the last 20 years. Rock characterisation, modelling and engineering design methods-Feng, Hudson, tan (eds) Taylor & Francis Group, London. pp 419–424
Hudson JA, Harrison JP (1992) A new approach to study complete rock engineering problems. Q J Eng Geol Hydrogeol 25:93–105. https://doi.org/10.1144/GSL.QJEG.1992.025.02.03
Janoo VC (1998) Quantification of shape, angularity, and surface texture of base course materials. Cold Regions Research and Engineering Laboratory, Special Report 98–1. https://doi.org/10.1061/40621(254)25
Jiao Y, Hudson JA (1995) The fully-coupled model for rock engineering systems. Int J Rock Mech Min Sci Geomech Abstr 32(5):491–512. https://doi.org/10.1016/0148-9062(95)00038-I
Liu C, Shi B, Zhou J, Tang CS (2011) Quantification and characterization of microporosity by image processing, geometric measurement and statistical method: application on SEM images of clay materials. Appl Clay Sci 54(1):97–106. https://doi.org/10.1016/j.clay.2011.07.022
Ma DX, Guo L, Yang D (2006) Approach to determine weight considering multi-factors interaction influence. Liaoning Tech Univ 25(4):521–523. (in Chinese). https://doi.org/10.3969/j.issn.1008-0562.2006.04.012
Meulenkamp F, Alvarez Grima M (1999) Application of neural networks for the prediction of the unconfined compressive strength (UCS) from Equotip hardness. Int J Rock Mech Min Sci 36:29–39. https://doi.org/10.1016/S0148-9062(98)00173-9
Ministry of Agriculture of the People’s Republic of China (1988) Method for determination of soil organic matter (National Standards of the People’s republic of China, GB 9834-88), Beijing (in Chinese)
Ministry of Transport of the People’s Republic of China (2007) Test methods of soils for highway engineering (JTG E40-2007), Beijing (in Chinese)
Ministry of Water Resources of the People’s Republic of China (1994) Method for determination of silica (dissolved) (SL 91.1-1994), Beijing (in Chinese)
Mulak P, Gaikwad DP, Talhar NR (2016) K-nearest neighbor and boundary cutting algorithm for intrusion detection system. Inf Syst Des Intell Appl 434:269–278. https://doi.org/10.1007/978-81-322-2752-6_26
Pusch R, Weston R (2003) Microstructural stability controls the hydraulic conductivity of smectitic buffer clay. Appl Clay Sci 23(1):35–41. https://doi.org/10.1016/S0169-1317(03)00084-X
Ratnaweera P, Meegoda NJ (1991) Microscopic modeling of shear strength of contaminated soils. Mechanics computing in S & beyond. In: ASCE Engineering Mechanics Speciality Conference
Reddy PHP Sivapullaiah PV (2010) Effect of alkali solution on swell behavior of soils with different mineralogy. Geoflorida. https://doi.org/10.1061/41095(365)273
Reig L, Tashima MM, Borrachero MV, Monzó J, Cheeseman CR, Payá J (2013) Properties and microstructure of alkali-activated red clay brick waste. Constr Build Mater 43:98–106. https://doi.org/10.1016/j.conbuildmat.2013.01.031
Rosli RN, Selamat MR, Ramli MH (2019) Shear strength and permeability properties of lateritic soils from North West Malaysia due to extended compaction. Mater Today: Proc 17:630–639. https://doi.org/10.1016/j.matpr.2019.06.344
Sedira N, Castro-Gomes J, Magrinho M (2018) Study of an alkali-activated binder based on tungsten mining mud and brick powder waste. In: Matbud’ 2018- 8th scientific-technical conference on material problems in civil engineering, 163. https://doi.org/10.1051/matecconf/201816306002
Singh VK, Singh D, Singh TN (2001) Prediction of strength properties of some schistose rocks from petrographic properties using artificial neural networks. Int J Rock Mech Min Sci 38(2):269–284. https://doi.org/10.1016/S1365-1609(00)00078-2
Sunil BM, Shrihari S, Nayak S (2009) Shear strength characteristics and chemical characteristics of leachate-contaminated lateritic soil. Eng Geol 106(1–2):20–25. https://doi.org/10.1016/j.enggeo.2008.12.011
Thomas A, Tripathi RK, Yadu LK (2018) A laboratory investigation of soil stabilization using enzyme and alkali-activated ground granulated blast-furnace slag. Arab J Sci Eng 43:5193–5202. https://doi.org/10.1007/s13369-017-3033-x
Yang Y, Zhang Q (1998) The application of artificial neural networks to rock engineering systems (RES). Int J Rock Mech Min Sci 35(6):727–745. https://doi.org/10.1016/S0148-9062(97)00339-2
Yin FP, He YF, Wang RM, Wang YP (2005) Application of clay minerals in wastewater treatment. Technol Water Treat 31(5):1–5 (in Chinese)
Zelasko JS, Krizek RJ, Edil TB (1975) Shear behavior of sands as a function of grain characteristics. In: Istanbul Conference Soil Mechanics Found Engineering 1:55–64
Acknowledgments
This research was supported by National Natural Science Foundation of China (No. 41731281) (No. 41801055), the project funded by China railway Corporation under Grant (No. 2017G002-S), the Guizhou Science and Technology Fund (No. [2019]1142), the Startup Fund of Sun Yat-sen University (No. 76140-18841212) and the Fundamental Research Funds for the Central Universities (No. 2020YJS122).
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wang, Q., Chen, J., Liu, J. et al. Relationships between shear strength parameters and microstructure of alkaline-contaminated red clay. Environ Sci Pollut Res 27, 33848–33862 (2020). https://doi.org/10.1007/s11356-020-09637-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-09637-9