Abstract
The aim of this review paper is to critically analyze the existing studies on waste electric and electronic equipment (WEEE), which is one of the most increasing solid waste streams. This complex solid waste stream has pushed many scientific communities to develop novel technologies with minimum ecological disturbance. Noteworthy amount of valuable metals makes e-waste to a core of “urban mining”; therefore, it warrants special attention. Present study is focused on all the basic conceptual knowledge of WEEE ranging from compositional analysis, global statistics of e-waste generation, and metallurgical processes applied for metals extraction from e-waste. This review critically analyses the existing studies to emphasize on the heterogeneity nature of e-waste, which has not been focused much in any of the existing review articles. Comprehensive analysis of conventional approaches such as pyrometallurgy and hydrometallurgy reveals that high costs and secondary pollution possibilities limit the industrial feasibilities of these processes. Therefore biohydrometallurgy, a green technology, has been attracting researchers to focus on this novel technique to implement it for metal extraction from WEEE.
Similar content being viewed by others
References
Alab OA, Huo X et al (2012) Comparative evaluation of environmental contamination and DNA damage induced by electronic-waste in Nigeria and China. Sci Total Environ 423:62–72
Altansukh B, Haga K, Ariunbolor N, Kawamura S, Shibayama A (2016) Leaching and adsorption of gold from waste printed circuit boards using iodine-iodide solution and activated carbon. Eng J 20(4):29–40
Annamalai J (2015) Occupational health hazards related to informal recycling of e-waste in India: an overview. Indian J Occup Environ Med 19(1):61
Anshu P, Hait S (2017) Comparative assessment of metallurgical recovery of metals from electronic waste with special emphasis on bioleaching. Environ Sci Pollut Res 24(8):69897008
Anshu P, Hait S (2018) Toxicity characterization of metals from various waste printed circuit boards. Process Saf Environ Prot 116:74–81
Awasthi AK, Li J (2017) Management of electrical and electronic waste: a comparative evaluation of China and India. Renew Sust Energ Rev 76:434–447
Awasthi AK, Zeng X, Li J (2016a) Comparative examining and analysis of e-waste recycling in typical developing and developed countries. Procedia Environ Sci 35:676–680
Awasthi AK, Zeng X, Li J (2016b) Relationship between e-waste recycling and human health risk in India: a critical review. Environ Sci Pollut Res 23(12):11509–11532
Aylmore MG, David M (2001) Thiosulfate leaching of gold-a review. Miner Eng 14(2):135–174
Banderas A, Guiliani N (2013) Bioinformatic prediction of gene functions regulated by quorum sensing in the bioleaching bacterium Acidithiobacillus ferrooxidans. Int J Mol Sci 14:16901–16916
Behnamfard A, Mohammad MS, Francesco V (2013) Process development for recovery of copper and precious metals from waste printed circuit boards with emphasize on palladium and gold and precipitation. Waste Manag 33(11):2354–2363
Boxall NJ, Cheng KY, Bruckard W, Kaksonen AH (2018) Application of indirect non-contact bioleaching for extracting metals from waste lithium-ion batteries. J Hazard Mater 360:504–511
Brandl H, Bosshard R, Wegmann M (2001) Computer-munching microbes: metal leaching from electronic scrap by bacteria and fungi. Hydrometallurgy 59(2):319–326
Chancerel P et al (2009) Assessment of precious metal flows during preprocessing of waste electrical and electronic equipment. J Ind Ecol 13(5):791–810
Chatterjee S (2012) Sustainable electronic waste management and recycling process. Am J Environ Eng 2(1):23–33
Chatterjee A, Abraham J (2017) Efficient management of e-wastes. Int J Environ Sci Technol 14(1):211–222
Chauhan G, Pant KK, Nigam KDP (2015) Chelation technology: a promising green approach for resource management and waste minimization. Environ Sci Process Impacts 17(1):12–40
Chauhan G, Jadhao P, Pant KK, Nigam KDP (2018) Novel technologies and conventional for recovery metals from waste electrical and electronic equipment: challenges & opportunities–a review. J Environ Chem Eng 6(1):1288–1304
Coman V, Robotin B, Ilea P (2013) Nickel recovery/removal from industrial wastes: a review. Resour Conserv Recycl 73:229–238
Cucchiella F, Adamo ID, Koh SCL, Rosa P (2015) Recycling of WEEEs: an economic assessment of present and future e-waste streams. Renew Sust Energ Rev 51:263–272
Das S, Ting YP, (2017) Improving gold (Bio)leaching efficiency through pretreatment using hydrogen peroxide assisted sulfuric acid. CLEAN - Soil, Air, Water 45(6):1500945
De MI et al (2007) Recovery of zinc and manganese from alkaline and zinc-carbon spent batteries. J Power Sources 172(2):975–983
Ghosh B, Gosh MK, Parhi P, Mukherjee PS, Mishra BK (2015) Waste printed circuit boards recycling: an extensive assessment of status. J Clean Prod 94:5–19
Gu W, Bai J, Dong B, Zhuang X, Zhao J, Zhang C, Wang J, Shih K (2017) Enhanced bioleaching efficiency of copper from waste printed circuit board driven by nitrogen-doped carbon nanotubes modified electrode. Chemical Engineering Journal 324:122–129
Hu Q, Wu X, Jiang Y et al (2013) Differential gene expression and bioinformatics analysis of copper resistance gene afe_1073 in Acidithiobacillus ferrooxidans. Biol Trace Elem Res 152:91–97
Ilyas S, Lee JC (2014) Bioleaching of metals from electronic scrap in a stirred tank reactor. Hydrometallurgy 149:50–62
Ilyas S, Lee JC, Chi R (2013) Bioleaching of metals from electronic scrap and its potential for commercial exploitation. Hydrometallurgy 131:138–143
Ilyas S, Lee JC, Kim B (2014) Bioremoval of heavy metals from recycling industry electronic waste by aconsortium of moderate thermophiles: process development and optimization. J Clean Prod 70:194–202
Imran M, Haydar S, Kim J, Awan MR, Bhatti AA (2017) E-waste flows, resource recovery and improvement of legal framework in Pakistan. Resour Conserv Recycl 125:131–138
Jadhav U, Su C, Hocheng H (2016) Leaching of metals from printed circuit board powder by an Aspergillus niger culture supernatant and hydrogen peroxide. RSC Adv 6(49):43442–43452
Jagannath A, Shetty V, Saidutta MB (2017) Bioleaching of copper from electronic waste using Acinetobacter sp. Cr B2 in a pulsed plate column operated in batch and sequential batch mode. J Environ Chem Eng 5(2):1599–1607
Joda N, Rashchi F (2012) Recovery of ultra fine grained silver and copper from PC board scraps. Sep Purif Technol 92:36–42
Joshi V, Adhapure N, Shah N et al (2017) Comparative bioleaching of metals from pulverized and non-pulverized PCBs of cell phone charger: advantages of non-pulverized PCBs. Environ Sci Pollut Res 24(36):28277–28286
Julander A, Lundgren L, Skare L, Grandér M, Palm B, Vahter M, Lidén C (2014) Formal recycling of e-waste leads to increased exposure to toxic metals: an occupational exposure study from Sweden. Environ Int 73:243–251
Khatri BR, Sodha AB, Shah MB, Tipre DR, Dave SR (2018) Chemical and microbial leaching of base metals from obsolete cell-phone printed circuit boards. Sustain Environ Res 28(6):333–339
Kumar A, Saini HS, Kumar S (2018) Bioleaching of gold and silver from waste printed circuit boardsby Pseudomonas balearica SAE1 isolated from an e-waste recycling facility. Curr Microbiol 75(2):194–201
Kuyucak N, Ata A (2013) Cyanide and removal options from effluents in gold mining and metallurgical processes. Miner Eng 50:13–29
Natarajan G, Tay SB et al (2015) Engineered strains enhance gold biorecovery from electronic scrap. Miner Eng 75:32–37
Ni K et al (2013) A review of human exposure to polybrominated diphenyl ethers (PBDEs) in China. Int J Hyg Environ Health 216(6):607–623
Pant D, Joshi D, Upreti MK, Kotnala RK (2012) Chemical and biological extraction of metals present in e-waste: a hybrid technology. Waste Manag 32(5):979–990
Pardhan JK, Kumar S (2012) Metals bioleaching from electronic waste by Chromobacterium violaceum and Pseudomonads sp. Waste Manag Res 30(11):1151–1159
Pardhan JK, Kumar S (2014) Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area, Delhi, India. Environ Sci Pollut Res 21(13):7913–7928
Perkins DN et al (2014) E-waste: a global hazard. Ann Glob Health 80(4):286–295
Pollman K, Kutschke S, Matys S, Raff J, Hlawacek G, Lederer FL (2018) Bio-recycling of metals: recycling of technical products using biological application. Biotechnol Adv 36:1048–1062
Rahman MA (2016) Development of bioleaching: proteomics and genomics approach in metals extraction process. AIMS Microbiol 2(3):332–339
Sahni A, Kumar A, Kumar S (2016) Chemo-biohydrometallurgy-a hybrid technology to recover metals from obsolete mobile SIM cards. Environ Nanotechnol Monit Manag 6:130–133
Shah MB, Devayani RT, Shailesh RD (2014) Chemical and biological processes for multi-metal extraction from waste printed circuit boards of computers and mobile phones. Waste Manag Res 32(11):1134–1141
Shah MB, Tipre DR, Purohit MS, Dave SR (2015) Development of two-step process for enhanced biorecovery of Cu–Zn–Ni from computer printed circuit boards. J Biosci Bioeng 120(2):167–173
Tue NM, Takahashi S, Subramanian A, Sakai S, Tanabe S (2013) Environmental contamination and human exposure to dioxin-related compounds in e-waste recycling sites of developing countries. Environ Sci Process Impacts 15(7):1326–1331
Uddin J (2012) Journal and conference paper on (environment) e-waste management. IOSR J Mech Civ Eng 2:25–45
Valix M, Hong Y (2014) Bioleaching of electronic waste using acidiophilic sulfur oxidising bacteria. J Clean Prod 65:465–472
Wang S, Zheng Y, Yan W, Chen L, Mahadevan GD, Zhao F (2016) Enhanced bioleaching efficiency of metals from E-wastes driven by biochar. J Hazard Mater 320:393–400
Wu W, Liu X, Zhang X et al (2018) Bioleaching of copper from waste printed circuit boards by bacteria-free cultural supernatant of iron–sulfur-oxidizing bacteria. Bioresour Bioprocessi 5(1):10
Xi FR, Yingying Q, Zhang FS (2015) Leaching of Au, Ag, and Pd from waste printed circuit boards of mobile phone by iodide lixiviant after supercritical water pre-treatment. Waste Manag 41:134–141
Xia M, Bao P, Liu A et al (2018) Bioleaching of low-grade waste printed circuit boards by mixed fungal culture and its community structure analysis. Resour Conserv Recycl 136:267–275
Xiang Y, Wu P, Zhu N et al (2010) Bioleaching of copper from waste printed circuit boards by bacterial consortium enriched from acid mine drainage. J Hazard Mater 184(1):812–818
Xie F, Cai T, Ma Y, Li H, Li C, Huang Z, Yuan G (2009) Recovery of Cu and Fe from printed circuit board waste sludge by ultrasound: evaluation industrial application. J Clean Prod 17(16):1494–1498
Xin B, Zhang D, Zangh X, Xia Y, Wu F et al (2009) Bioleaching mechanism of Co and Li from spent lithium-ion battery by the mixed culture of acidophilic sulfur-oxidizing and iron-oxidizing bacteria. Bioresour Technol 100:6163–6169
Yoo JM, Jeong J, Yoo K, Lee JC, Kim W (2009) Enrichment of the metallic components from waste printed circuit boards by a mechanical separation process using a stamp mill. Waste Manag 29(3):1132–1137
Zhou S, Gan M, Zhu J, Liu X, Qiu G (2018) Assessment of bioleaching microbial community structure and function based on next-generation sequencing technologies. Mineral 8(12):596
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible Editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Thakur, P., Kumar, S. Metallurgical processes unveil the unexplored “sleeping mines” e- waste: a review. Environ Sci Pollut Res 27, 32359–32370 (2020). https://doi.org/10.1007/s11356-020-09405-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-09405-9