Abstract
Thermal barrier coating (TBC) implementations and oxygenated additives are remarkable issues that may decrease the exhaust emissions of engines. This study examines the effect of chromium oxide (Cr2O3) coating and the addition of ethylhexyl nitrate (EHN) on exhaust emissions of a diesel engine. In addition, an artificial neural network (ANN) model was designed which estimates exhaust emissions based on engine speed in order to reduce time, labor, and costs lost in experimental studies, and the performance of the ANN was evaluated. Piston crown and valves of engine were processed with Cr2O3. The E3, E6, and E9 blends were produced by blending 3%, 6%, and 9% (vol.) ratios of 2-ethylhexyl nitrate with diesel fuel. Engine speed was used as input parameter and carbon monoxide (CO), nitrogen oxide (NOX), hydrocarbon (HC), and smoke density were used as output parameters. To evaluate the performance of ANN, error rates, and regression (R) values were considered. Experimental results revealed that CO, HC, and smoke density decreased in the CE whereas NOX values increased compared with the UE. The addition of EHN reduced NOX emission and smoke density, whereas it increased CO and HC emissions. The result showed that ANN model can predict the exhaust emissions at a high accuracy rate. The lowest regression results were achieved as 0.98395, 0.99047, 0.99268, and 0.98383 for the CO, NOX, smoke density, and HC, respectively. Moreover, the average R values of NOX, HC, CO, and smoke density were obtained as 0.99767, 0.99131, 0.99396, and 0.99741. The maximum error rates of the estimated outcomes were obtained as 5.25% on average.
Similar content being viewed by others
Abbreviations
- EHN:
-
2-Ethylhexyl nitrate
- CE:
-
Coated engine
- UE:
-
Uncoated engine
- TBC:
-
Thermal barrier coating
- ANN:
-
Artificial Neural Network
- μm:
-
Micron meter
- Cr3C2 :
-
Chromium oxide
- Al2O3 :
-
Alumina
- E3:
-
3% ethylhexyl nitrate + 97% diesel fuel
- E6:
-
6% ethylhexyl nitrate + 94% diesel fuel
- E9:
-
9% ethylhexyl nitrate + 91% diesel fuel
- CO:
-
Carbon monoxide
- NOx:
-
Nitrogen oxides
- ppm:
-
Part per million
- rpm:
-
Revolution per minute
- LM:
-
Levenberg–Marquardt
- MAPE:
-
Mean absolute percentage error
- MSE:
-
Mean-square error
- R :
-
Correlation coefficient
References
Abedin MJ, Masjuki HH, Kalam MA et al (2014) Combustion, performance, and emission characteristics of low heat rejection engine operating on various biodiesels and vegetable oils. Energy Convers Manag 85:173–189. https://doi.org/10.1016/j.enconman.2014.05.065
Arbab MI, Varman M, Masjuki HH, Kalam MA, Imtenan S, Sajjad H, Rizwanul Fattah IM (2015) Evaluation of combustion, performance, and emissions of optimum palm-coconut blend in turbocharged and non-turbocharged conditions of a diesel engine. Energy Convers Manag. 90:111–120. https://doi.org/10.1016/j.enconman.2014.11.017
Atmanli A (2016) Effects of a cetane improver on fuel properties and engine characteristics of a diesel engine fueled with the blends of diesel, hazelnut oil and higher carbon alcohol. Fuel 172:209–217. https://doi.org/10.1016/j.fuel.2016.01.013
Çelelebi K, Uludamar E, Tosun E et al (2017) Experimental and artificial neural network approach of noise and vibration characteristic of an unmodified diesel engine fuelled with conventional diesel, and biodiesel blends with natural gas addition. Fuel 197:159–173. https://doi.org/10.1016/j.fuel.2017.01.113
Chen X, Wang Z, Pan S, Pan H (2019) Improvement of engine performance and emissions by biomass oil filter in diesel engine. Fuel 235:603–609. https://doi.org/10.1016/j.fuel.2018.08.038
Dharma S, Hassan MH, Ong HC, Sebayang AH, Silitonga AS, Kusumo F, Milano J (2017) Experimental study and prediction of the performance and exhaust emissions of mixed Jatropha curcas-Ceiba pentandra biodiesel blends in diesel engine using artificial neural networks. J Clean Prod 164:618–633. https://doi.org/10.1016/j.jclepro.2017.06.065
Dong Z, Chen W, Zheng W, Guzonas D (2012) Corrosion behavior of chromium oxide based ceramics in supercritical water (SCW) environments. Corros Sci 65:461–471. https://doi.org/10.1016/j.corsci.2012.08.048
Fayyazbakhsh A, Pirouzfar V (2017) Comprehensive overview on diesel additives to reduce emissions, enhance fuel properties and improve engine performance. Renew. Sustain. Energy Rev. 74:891–901
Garud V, Bhoite S, Patil S, Ghadage S, Gaikwad N, Kute D, Sivakumar G (2017) Performance and combustioncharacteristics of thermal barrier coated (YSZ) low heat rejection diesel engine. Mater Today Proc 4:188–194. https://doi.org/10.1016/j.matpr.2017.01.012
Geng P, Cao E, Tan Q, Wei L (2017) Effects of alternative fuels on the combustion characteristics and emission products from diesel engines: a review. Renew. Sustain. Energy Rev. 71:523–534
Hazar H (2010) Cotton methyl ester usage in a diesel engine equipped with insulated combustion chamber. Appl Energy 87:134–140. https://doi.org/10.1016/j.apenergy.2009.07.024
Hazar H (2011) Characterization and effect of using cotton methyl ester as fuel in a LHR diesel engine. Energy Convers Manag 52:258–263. https://doi.org/10.1016/J.ENCONMAN.2010.06.066
Hazar H (2017) Investigation of the effects of tripropylene glycol addition to diesel fuel on combustion and exhaust emissions at an isolated diesel engine. Energy Convers Manag 142:62–68. https://doi.org/10.1016/j.enconman.2017.02.082
Hazar H, Gul H (2016a) New modeling and experimental study regarding tungsten-carbide-coated parts of the combustion chamber of a compression-ignition engine. Energy and Fuels 30:5148–5157. https://doi.org/10.1021/acs.energyfuels.6b00758
Hazar H, Gul H (2016b) Modeling analysis of chrome carbide (Cr3C2) coating on parts of combustion chamber of a SI engine. Energy 115:76–87. https://doi.org/10.1016/j.energy.2016.08.083
Hones P, Diserens M, Lévy F (1999) Characterization of sputter-deposited chromium oxide thin films. In: Surface and coatings technology. pp 277–283
Ileri E (2016) Experimental study of 2-ethylhexyl nitrate effects on engine performance and exhaust emissions of a diesel engine fueled with n-butanol or 1-pentanol diesel-sunflower oil blends. Energy Convers Manag 118:320–330. https://doi.org/10.1016/j.enconman.2016.04.015
Ileri E, Koçar G (2013) Effects of antioxidant additives on engine performance and exhaust emissions of a diesel engine fueled with canola oil methyl ester-diesel blend. Energy Convers Manag 76:145–154. https://doi.org/10.1016/j.enconman.2013.07.037
Imdadul HK, Masjuki HH, Kalam MA, Zulkifli NWM, Alabdulkarem A, Rashed MM, Ashraful AM (2016) Influences of ignition improver additive on ternary (diesel-biodiesel-higher alcohol) blends thermal stability and diesel engine performance. Energy Convers Manag 123:252–264. https://doi.org/10.1016/j.enconman.2016.06.040
Imdadul HK, Masjuki HH, Kalam MA, Zulkifli NWM, Kamruzzaman M, Shahin MM, Rashed MM (2017a) Evaluation of oxygenated n-butanol-biodiesel blends along with ethyl hexyl nitrate as cetane improver on diesel engine attributes. J Clean Prod 141:928–939. https://doi.org/10.1016/j.jclepro.2016.09.140
Imdadul HK, Rashed MM, Shahin MM, Masjuki HH, Kalam MA, Kamruzzaman M, Rashedul HK (2017b) Quality improvement of biodiesel blends using different promising fuel additives to reduce fuel consumption and NO emission from CI engine. Energy Convers Manag 138:327–337. https://doi.org/10.1016/j.enconman.2017.01.077
James F, Shackelford EJF, Alexander W (2001) Materials science engineering hand book. CRC Press LLC, Boca Raton London New York Washington, D.C
Jena SP, Acharya SK, Das HC, Patnaik PP, Bajpai S (2017) Investigation of the effect of FeCl 3 on combustion and emission of diesel engine with thermal barrier coating. Sustain Environ Res 28:1–7. https://doi.org/10.1016/j.serj.2017.10.002
Karthickeyan V (2019) Effect of cetane enhancer on Moringa oleifera biodiesel in a thermal coated direct injection diesel engine. Fuel 235:538–550. https://doi.org/10.1016/j.fuel.2018.08.030
Karthikayan S, Ganesan S, Vasanthakumar P, Sankaranarayanan G, Dinakar M (2017) Innovative research trends in the application of thermal barrier metal coating in internal combustion engines. Mater Today Proc 4:9004–9012. https://doi.org/10.1016/j.matpr.2017.07.253
Krishna MVSM, Rao VVRS, Reddy TKK, Murthy PVK (2014) Comparative studies on performance evaluation of di diesel engine with high grade low heat rejection combustion chamber with carbureted alcohols and crude jatropha oil. Renew Sustain Energy Rev 36:1–19. https://doi.org/10.1016/j.rser.2014.04.020
Krishna MVSM, Prakash TO, Ushasri P et al (2016) Experimental investigations on direct injection diesel engine with ceramic coated combustion chamber with carbureted alcohols and crude jatropha oil. Renew Sustain Energy Rev 53:606–628. https://doi.org/10.1016/j.rser.2015.09.011
Krishnamani S, Harish V, Harishankar V, Raj TM (2018) The experimental investigation on performance and emission characteristics of ceramic coated diesel engine using diesel and biodiesel. In: Materials Today: Proceedings. pp 16327–16337
Li G, Shi J (2010) On comparing three artificial neural networks for wind speed forecasting. Appl Energy 87:2313–2320. https://doi.org/10.1016/j.apenergy.2009.12.013
Li T, Caton JA, Jacobs TJ (2016) Energy distributions in a diesel engine using low heat rejection (LHR) concepts. Energy Convers Manag 130:14–24. https://doi.org/10.1016/j.enconman.2016.10.051
Lin CY, Lin HA (2006) Diesel engine performance and emission characteristics of biodiesel produced by the peroxidation process. Fuel 85:298–305. https://doi.org/10.1016/j.fuel.2005.05.018
Lü XC, Yang JG, Zhang WG, Huang Z (2005) Improving the combustion and emissions of direct injection compression ignition engines using oxygenated fuel additives combined with a cetane number improver. Energy and Fuels. 19:1879–1888. https://doi.org/10.1021/ef0500179
Mohamed Ismail H, Ng HK, Queck CW, Gan S (2012) Artificial neural networks modelling of engine-out responses for a light-duty diesel engine fuelled with biodiesel blends. Appl Energy 92:769–777. https://doi.org/10.1016/j.apenergy.2011.08.027
Mohapatra D, Swain RK, Jena SP, Acharya SK, Patnaik PP (2018) Effect of steam injection and FeCl3 as fuel additive on performance of thermal barrier coated diesel engine. Sustain Environ Res 28:247–255. https://doi.org/10.1016/j.serj.2018.03.004
Musthafa MM (2017) Development of performance and emission characteristics on coated diesel engine fuelled by biodiesel with cetane number enhancing additive. Energy 134:234–239. https://doi.org/10.1016/j.energy.2017.06.012
Patel NK, Singh RN (2014) Optimization of NOx emission from soya biodiesel fuelled diesel engine using cetane improver (DTBP). Jordan J Mech Ind Eng 8:213–217
Portinha A, Teixeira V, Carneiro J, Martins J, Costa MF, Vassen R, Stoever D (2005) Characterization of thermal barrier coatings with a gradient in porosity. Surf Coatings Technol 195:245–251. https://doi.org/10.1016/j.surfcoat.2004.07.094
Prasada Rao K, Victor Babu T, Anuradha G, Appa Rao BV (2017) IDI diesel engine performance and exhaust emission analysis using biodiesel with an artificial neural network (ANN). Egypt J Pet 26:593–600. https://doi.org/10.1016/j.ejpe.2016.08.006
Qian W, Huang H, Pan M, Huang R, Tong C, Guo X, Yin J (2020) Effects of 2-ethylhexyl nitrate and post-injection strategy on combustion and emission characterizes in a dimethyl carbonate/diesel blending engine. Fuel. 263:116687. https://doi.org/10.1016/j.fuel.2019.116687
Rashed MM, Kalam MA, Masjuki HH, Habibullah M, Imdadul HK, Shahin MM, Rahman MM (2016) Improving oxidation stability and NOX reduction of biodiesel blends using aromatic and synthetic antioxidant in a light duty diesel engine. Ind Crops Prod 89:273–284. https://doi.org/10.1016/j.indcrop.2016.05.008
Rashedul HK, Masjuki HH, Kalam MA, Teoh YH, How HG, Rizwanul Fattah IM (2015) Effect of antioxidant on the oxidation stability and combustion-performance-emission characteristics of a diesel engine fueled with diesel-biodiesel blend. Energy Convers Manag 106:849–858. https://doi.org/10.1016/j.enconman.2015.10.024
Silitonga AS, Masjuki HH, Ong HC, Sebayang AH, Dharma S, Kusumo F, Siswantoro J, Milano J, Daud K, Mahlia TMI, Chen WH, Sugiyanto B (2018) Evaluation of the engine performance and exhaust emissions of biodiesel-bioethanol-diesel blends using kernel-based extreme learning machine. Energy 159:1075–1087. https://doi.org/10.1016/j.energy.2018.06.202
Simsek S, Uslu S (2020) Investigation of the effects of biodiesel/2-ethylhexyl nitrate (EHN) fuel blends on diesel engine performance and emissions by response surface methodology (RSM). Fuel 275:118005. https://doi.org/10.1016/j.fuel.2020.118005
Soukht Saraee H, Taghavifar H, Jafarmadar S (2017) Experimental and numerical consideration of the effect of CeO2 nanoparticles on diesel engine performance and exhaust emission with the aid of artificial neural network. Appl Therm Eng 113:663–672. https://doi.org/10.1016/j.applthermaleng.2016.11.044
Taghavifar H, Taghavifar H, Mardani A, Mohebbi A (2014) Exhaust emissions prognostication for di diesel group-hole injectors using a supervised artificial neural network approach. Fuel. 125:81–89. https://doi.org/10.1016/j.fuel.2014.02.016
Venkadesan G, Muthusamy J (2018) Experimental Investigation of Al2O3/8YSZ and CeO2/8YSZ plasma sprayed thermal barrier coating on diesel engine. Ceram Int. 45:3166–3176. https://doi.org/10.1016/j.ceramint.2018.10.218
Yilmaz N, Vigil FM, Donaldson AB, Darabseh T (2014) Investigation of CI engine emissions in biodiesel-ethanol-diesel blends as a function of ethanol concentration. Fuel 115:790–793. https://doi.org/10.1016/j.fuel.2013.08.012
Yusaf TF, Buttsworth DR, Saleh KH, Yousif BF (2010) CNG-diesel engine performance and exhaust emission analysis with the aid of artificial neural network. Appl Energy 87:1661–1669. https://doi.org/10.1016/j.apenergy.2009.10.009
Yusri IM, Abdul Majeed APP, Mamat R, Ghazali MF, Awad OI, Azmi WH (2018) A review on the application of response surface method and artificial neural network in engine performance and exhaust emissions characteristics in alternative fuel. Renew. Sustain. Energy Rev. 90:665–686
Zannis TC, Hountalas DT (2004) DI diesel engine performance and emissions from the oxygen enrichment of fuels with various aromatic content. Energy and Fuels 18:659–666. https://doi.org/10.1021/ef0301598
Acknowledgments
The authors would like to extend their sincere appreciations to Firat University for the monetary assistance of this research.
Funding
This research was funded by the Firat University Scientific Research Projects Management Unit under Project No. TEKF.17.20.
Author information
Authors and Affiliations
Corresponding author
Additional information
Responsible editor: Philippe Garrigues
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• CO, HC, and smoke density decreased and NOX was slightly increased by the Cr2O3 coating process in a diesel engine.
• 2-Ethylhexyl nitrate (EHN) was added to diesel fuel with the ratio of 3%, 6%, and 9%, by volume.
• Lower NOX and smoke density and higher HC and CO values were obtained with the EHN usage.
• NOX, CO, HC, and smoke density values were significantly reduced by addition of EHN in the coated diesel engine.
• NOX, CO, HC, and smoke density values were predicted with high accuracy by ANN model.
Rights and permissions
About this article
Cite this article
Sevinc, H., Hazar, H. Investigation of exhaust emissions of an isolated diesel engine blended with ethylhexyl nitrate using experimental and ANN approach. Environ Sci Pollut Res 27, 33753–33772 (2020). https://doi.org/10.1007/s11356-020-09373-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11356-020-09373-0