Advertisement

Environmental Science and Pollution Research

, Volume 25, Issue 24, pp 24379–24393 | Cite as

Characterization of outdoor bronze monument patinas: the potentialities of near-infrared spectroscopic analysis

  • Emilio Catelli
  • Giorgia Sciutto
  • Silvia Prati
  • Yiming Jia
  • Rocco Mazzeo
Research Article
  • 82 Downloads

Abstract

The corrosion products usually found on outdoor bronzes are generated by the interaction between the metal alloy and the atmospheric pollutants. To protect the external surface of bronzes, different organic materials (natural or synthetic) can be applied, creating over time a patina consisting of a complex mixture of inorganic and organic degraded components. The correct chemical characterization of patina constituents is fundamental to define the state of conservation of a metal artwork and address proper restoration actions. In this paper, we evaluated the potentialities of near-infrared (NIR) reflectance microscopy (4000–7500 cm−1) as complementary method to mid-infrared (MIR) analyses for the characterization of bronze patinas. Although NIR spectroscopy has been already used in the field of heritage science, its application for the characterization of bronze patinas is almost unexplored. In this paper, several corrosion products usually found on the surface of outdoor bronze sculptures were synthesized, characterized, and submitted to the NIR-MIR total reflection analysis to build up a reference spectral database. We devoted particular attention to the NIR features of copper hydroxychlorides, such as atacamite and paratacamite, which have not been studied in detail up to now. A selection of organic-based formulations, commonly used by restorers to protect the bronze surface against the outdoor aggressive environment, were also considered as references. Successively, NIR-MIR reflectance microscopy was successfully employed for the analysis of patina micro-samples collected from the bronze statues of the Neptune Fountain (sixteenth century) located in Bologna. The obtained results demonstrate the ability of NIR spectroscopy to identify organic and inorganic patina constituents, even in mixtures. In addition, the study can be considered as a proof of concept for the possible future application of the technique for in situ diagnostic campaigns on bronze sculptures.

Keywords

Near-infrared spectroscopy Mid-infrared spectroscopy Infrared microscopy Bronze patina Neptune fountain Reflectance spectroscopy Outdoor bronze sculptures 

Notes

Compliance with ethical standards

Conflicts of interest

The authors declare that they have no competing interests.

Supplementary material

11356_2018_2483_MOESM1_ESM.pdf (708 kb)
ESM 1 (PDF 708 kb)

References

  1. Bacci M, Baronti S, Casini A, Lotti F, Picollo M, Casazza O (1992) Non-destructive spectroscopic investigations on paintings using optical fibers. Mat Res Soc Symp Proc 267:265–283CrossRefGoogle Scholar
  2. Bertolotti G, Bersani D, Lottici PP, Alesiani M, Malcherek T, Schlüter J (2012) Micro-raman study of copper hydroxychlorides and other corrosion products of bronze samples mimicking archaeological coins. Anal Bioanal Chem 402:1451–1457CrossRefGoogle Scholar
  3. Buti D, Rosi F, Brunetti BG, Miliani C (2013) In-situ identification of copper-based green pigments on paintings and manuscripts by reflection FTIR. Anal Bioanal Chem 405:2699–2711CrossRefGoogle Scholar
  4. Chaffin NC, Griffiths PR (1998) Role of scattering coefficients in extended near-infrared diffuse reflection spectrometry. Appl Spectrosc 52:218–221CrossRefGoogle Scholar
  5. Chiavari G, Ferretti S, Galletti GC, Mazzeo R (1991) Analytical pyrolysis as a tool for the characterization of organic substances in artistic and archaeological objects. J Anal Appl Pyrol 20:253–261CrossRefGoogle Scholar
  6. Chiavari C, Rahmouni K, Takenouti H, Joiret S, Vermaut P, Robbiola L (2007) Composition and electrochemical properties of natural patinas of outdoor bronze monuments. Electrochim Acta 52:7760–7769CrossRefGoogle Scholar
  7. Cicileo GP, Crespo MA, Rosales BM (2004) Comparative study of patinas formed on statuary alloys by means of electrochemical and surface analysis techniques. Corr Sci 46:929–953CrossRefGoogle Scholar
  8. Frost RL, Reddy BJ, Wain DL, Martens WN (2007) Identification of the rosasite group minerals—an application of near infrared spectroscopy. Spectrochim Acta Part A 66:1075–1081CrossRefGoogle Scholar
  9. Gaydon JW, Glass HJ, Pascoe RD (2009) Method for near infrared sensor-based sorting of a copper ore. J Near Infrared Spec 17:177–194CrossRefGoogle Scholar
  10. Griffiths PR, De Haseth JA (2007) Fourier transform infrared spectrometry, 2nd edn. John Wiley & Sons, New YorkCrossRefGoogle Scholar
  11. Guida G, Marabelli M, Mazzeo R, Morigi G (1994) Chemical and physical examination of the bronze sculptures of the fountainof Neptune in relation to the restoration, the identification of the construction technique and previous restoration works. Science and Technology for Cultural Heritage 3:75–88Google Scholar
  12. Hayez V, Guillaume J, Hubin A, Terryn H (2004) Micro-Raman spectroscopy for the study of corrosion products on copper alloys: setting up of a reference database and studying works of art. J Raman Spectrosc 35:732–738CrossRefGoogle Scholar
  13. Hayez V, Costa V, Guillaume J, Terryn H, Hubin A (2005) Micro Raman spectroscopy used for the study of corrosion products on copper alloys: study of the chemical composition of artificial patinas used for restoration purposes. Analyst 130:550–556CrossRefGoogle Scholar
  14. Hunt GR (1970) Visible and near-infrared spectra of minerals and rocks: I silicate minerals. Mod Geol 1:283–300Google Scholar
  15. Letardi P, Salvadori B, Galeotti M, Cagnini A, Porcinai S, Santagostino Barbone A, Sansonetti A (2016) An in situ multi-analytical approach in the restoration of bronze artefacts. Microchem J 125:151–158CrossRefGoogle Scholar
  16. Leygraf C, Wallinder IO, Tidblad J, Graedel T (2000) Atmospheric corrosion. John Wiley & Sons, New YorkGoogle Scholar
  17. Liu XD, Meng DD, Zheng XG, Hagihala M, Guo QX (2011) Mid-IR and Raman spectral properties of clinoatacamite-structure basic copper chlorides. Adv Mat Res 146:1202–1205Google Scholar
  18. Marabelli M, Napolitano G (1991) Nuovi sistemi protettivi applicabili su opere o manufatti in bronzo esposti all'aperto. Materiali e strutture 1:51–56Google Scholar
  19. Marabelli M, Mazzeo R, Morigi G (1991) Caratterizzazione dei prodotti di alterazione e della vernice nera dei bronzi della Fontana del Nettuno. OPD/Restauro 3:57–62Google Scholar
  20. Martens W, Frost RL, Kloprogge JT, Williams PA (2003a) Raman spectroscopic study of the basic copper sulphates—implications for copper corrosion and ‘bronze disease’. J Raman Spectrosc 34:145–151CrossRefGoogle Scholar
  21. Martens W, Frost RL, Williams P (2003b) Raman and infrared spectroscopic study of the basic copper chloride minerals–implications for the study of the copper and brass corrosion and ‘bronze deseas’. Journal of mineralogy and Geochemistry 178:197–215Google Scholar
  22. Matteini M, Moles A, Lalli C (1984) Infrared spectroscopy: a suitable tool for the characterization of components in bronze patinas. In: Icom 7th triennial meeting. Copenhagen pp 84–22Google Scholar
  23. Mazzeo R (2005) Patine su manufatti metallici In: Le Patine. Genesi, significato, Conservazione, Kermes quaderni, Nardini, Firenze, pp 29–43Google Scholar
  24. Mazzeo R, Joseph E (2007) Attenuated total reflectance microspectroscopy mapping for the characterisation of bronze corrosion products. Eur J Mineral 19:363–371CrossRefGoogle Scholar
  25. Miliani C, Rosi F, Borgia I, Benedetti P, Brunetti BG, Sgamellotti A (2007a) Fiber-optic fourier transform mid-infrared reflectance spectroscopy: a suitable technique for in situ studies of mural paintings. Appl Spectrosc 61:293–299CrossRefGoogle Scholar
  26. Miliani C, Rosi F, Burnstock A, Brunetti BG, Sgamellotti A (2007b) Non-invasive in-situ investigations versus micro-sampling: a comparative study on a Renoirs painting. Appl Phys A Mater Sci Process 89:849–856CrossRefGoogle Scholar
  27. Miliani C, Daveri A, Brunetti BG, Sgamellotti A (2008) CO2 entrapment in natural ultramarine blue. Chem Phys Lett 466:148–151CrossRefGoogle Scholar
  28. Miliani C, Rosi F, Daveri A, Brunetti BG (2012) Reflection infrared spectroscopy for the non-invasive in situ study of artists’ pigments. Appl Phys A Mater Sci Process 106:295–307CrossRefGoogle Scholar
  29. Pitthard V, Stone R, Stanek S, Griesser M, Hanzer H (2011) Organic patinas on renaissance and baroque bronzes–interpretation of compositions of the original patination by using a set of simulated varnished bronze coupons. J Cul Herit 12:44–53CrossRefGoogle Scholar
  30. Poli T, Chiantore O, Nervo M, Piccirillo A (2011) Mid-IR fiber-optic reflectance spectroscopy for identifying the finish on wooden furniture. Anal and Bioanal Chem 400:1161–1171CrossRefGoogle Scholar
  31. Rama Subba Reddy R, Lakshmi Reddy S, Siva Reddy G, Reddy BJ (2002) Spectral studies of divalent copper in antlerite mineral. Cryst Res Technol 37:485–490CrossRefGoogle Scholar
  32. Reddy KM, Jacob AS, Reddy BJ, Reddy YP (1987) Optical absorption spectra of Cu2+ in brochantite. Phys Status Solidi B 139:K146–K150CrossRefGoogle Scholar
  33. Rosi F, Daveri A, Doherty B, Nazzareni S, Brunetti BG, Sgamellotti A, Miliani C (2010) On the use of overtone and combination bands for the analysis of the CaSO4–H2O system by mid-infrared reflection spectroscopy. Appl Spectrosc 64:956–963CrossRefGoogle Scholar
  34. Rosi F, Daveri A, Moretti P, Brunetti BG, Miliani C (2016) Interpretation of mid and near-infrared reflection properties of synthetic polymer paints for the non-invasive assessment of binding media in twentieth-century pictorial artworks. Microchem J 124:898–908CrossRefGoogle Scholar
  35. Sciutto G, Prati S, Bonacini I, Olivieri P, Mazzeo R (2014) FT-NIR microscopy: an advanced spectroscopic approach for the characterisation of paint cross-sections. Microchem J 112:87–96CrossRefGoogle Scholar
  36. Scott DA (2002) Copper and bronze in art: corrosion, colorants, conservation. Getty publications, Los AngelesGoogle Scholar
  37. Secco EA (1988) Spectroscopic properties of SO4 (and OH) in different molecular and crystalline environments. I. Infrared spectra of Cu4(OH)6SO4, Cu4(OH)4OSO4, and Cu3 (OH)4SO4. Can J Chem 66:329–336CrossRefGoogle Scholar
  38. Serghini-Idrissi M, Bernard MC, Harrif FZ, Joiret S, Rahmouni K, Srhiri A, Takenouti H, Vivier V, Ziani M (2005) Electrochemical and spectroscopic characterizations of patinas formed on an archaeological bronze coin. Electrochim Acta 50:4699–4709CrossRefGoogle Scholar
  39. Sharkey JB, Lewin SZ (1971) Conditions governing the formation of atacamite and paratacamite. The American Mineralogist 56:179–192Google Scholar
  40. Squarcialupi MC, Bernardini GP, Faso V, Atrei A, Rovida G (2002) Characterisation by XPS of the corrosion patina formed on bronze surfaces. J Cult Herit 3:199–204CrossRefGoogle Scholar
  41. Sreeramulu P, Reddy KM, Jacob AS, Reddy BJ (1990) UV-VIS, NIR, IR, and EPR spectra of connellite. J Crystallogr Spectrosc Res 20:93–96CrossRefGoogle Scholar
  42. Strandberg H (1998) Reactions of copper patina compounds—I. Influence of some air pollutants. Atmosph Environ 32:3511–3520CrossRefGoogle Scholar
  43. Tennent NH, Antonio KM (1981) Bronze disease: synthesis and characterisation of botallackite, paratacamite and atacamite by infra-red spectroscopy. In: Icom committee for conservation. 6th triennial meeting. Ottawa, p 11Google Scholar
  44. Vagnini M, Miliani C, Cartechini L, Rocchi P, Brunetti BG, Sgamellotti A (2009) FT-NIR spectroscopy for non-invasive identification of natural polymers and resins in easel paintings. Anal Bioanal Chem 395:2107–2118CrossRefGoogle Scholar
  45. Zaffino C, Guglielmi V, Faraone S, Vinaccia A, Bruni S (2015) Exploiting external reflection FTIR spectroscopy for the in-situ identification of pigments and binders in illuminated manuscripts. Brochantite and posnjakite as a case study. Spectrochim Acta A 136:1076–1085CrossRefGoogle Scholar

Copyright information

© Springer-Verlag GmbH Germany, part of Springer Nature 2018

Authors and Affiliations

  1. 1.Department of Chemistry “G. Ciamician”, Microchemistry and Microscopy Art Diagnostic Laboratory (M2ADL)University of BolognaRavennaItaly

Personalised recommendations