Skip to main content
SpringerLink
Log in

Fine and ultrafine particles emitted from laser printers as indoor air contaminants in German offices

  • Research Article
  • Published:
Environmental Science and Pollution Research Aims and scope Submit manuscript

Abstract

Purpose

Various publications indicate that the operation of laser printers and photocopiers may be associated with health effects due to the release of gaseous components and fine and ultrafine particles (UFP). However, only sparse studies are available that evaluate the possible exposure of office workers to printer emissions under real conditions. Therefore, the aim of our study was to assess the exposure of office workers to particulate matter released from laser printers and photocopiers.

Methods

Concentrations of fine particles and UFP were measured before, during, and after the operation of laser printing devices in 63 office rooms throughout Germany. Additionally, the particles were characterized by electron microscopy and energy-dispersive X-ray spectroscopy.

Results

A significant increase of fine particles and UFP was identified in ambient workplace air during and after the printing processes. Particle fractions between 0.23 and 20 μm emitted by the office machines significantly affect particle mass concentrations while printing 500 pages, i.e., during the printing process, PM0.23–20, PM2.5, and PM10 concentrations increased in 43 out of the evaluated 62 office rooms investigated. Additionally, a significant increase was observed in submicrometer particles, with median particle number concentrations of 6,503 particles/cm3 before and 18,060 particles/cm3 during the printing process.

Conclusions

Our data indicate that laser printers and photocopiers could be a relevant source of fine particles and particularly UFP in office rooms.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

Explore related subjects

Discover the latest articles, news and stories from top researchers in related subjects.

References

  • Barthel M, Pedan V, Hahn O, Rothhardt M, Bresch H, Jann O et al (2011) XRF-analysis of fine and ultrafine particles emitted from laser printing devices. Environ Sci Technol 45:7819–7825

    Article  CAS  Google Scholar 

  • BfR (2008) BfR schließt Arbeiten zur „Toner“-Problematik mit einer gesundheitlichen Bewertung möglicher Risiken durch Druckeremissionen ab. Gesundheitliche Bewertung Nr. 014/2008 vom 31. März 2008. Press release, Berlin

  • Caesar T, Schmitt T (2009) Entwicklung eines Filters für Laserdrucker, Fax- und Kopiergeräte als wirkungsvoller Schutz vor Fein- und Tonerstaub in Innenräumen. Gefahrst Reinhalt L 69:110–114

    CAS  Google Scholar 

  • Cheng YH (2008) Comparison of the TSI Model 8520 and Grimm Series 1.108 portable aerosol instruments used to monitor particulate matter in an iron foundry. J Occup Environ Hyg 5:157–168

    Article  CAS  Google Scholar 

  • Destaillats H, Maddalena RL, Singer BC, Hodgson AT, McKone TE (2008) Indoor pollutants emitted by office equipment: a review of reported data and information needs. Atmos Environ 42:1371–1388

    Article  CAS  Google Scholar 

  • ECMA International (2007) Standard ECMA-328. Determination of chemical emission rates from electronic equipment, 3rd edn. ECMA International, Geneva

    Google Scholar 

  • Ewers U, Nowak D (2006) Health hazards caused by emissions of laser printers and copiers? Gefahrst Reinhalt L 66:203–210

    CAS  Google Scholar 

  • Fiedler J, Kura J, Moriske HJ, Pietsch A (2009) Freisetzung feiner und ultrafeiner Partikeln aus Laserdruckern unter Realraumbedingungen. Gefahrst Reinhalt L 69:77–82

    Google Scholar 

  • Fromme H, Twardella D, Dietrich S, Heitmann D, Schierl R, Liebl B et al (2007) Particulate matter in the indoor air of classrooms: exploratory results from Munich and surrounding area. Atmos Environ 41:854–866

    Article  CAS  Google Scholar 

  • Gadhia PK, Patel D, Solanki KB, Tamakuwala DN, Pithawala MA (2005) A preliminary cytogenetic and hematological study of photocopying machine operators. Indian J Occup Environ Med 9:22–25

    Article  Google Scholar 

  • Glytsos T, Ondráček J, Džumbová L, Kopanakis I, Lazaridis M (2010) Characterization of particulate matter concentrations during controlled indoor activities. Atmos Environ 44:1539–1549

    Article  CAS  Google Scholar 

  • Gminski R, Mersch-Sundermann V (2006) Gesundheitliche Bewertung der Exposition gegenüber Tonerstäuben und gegenüber Emissionen aus Laserdruckern und Kopiergeräten - Aktueller Erkenntnisstand. Umweltmed Forsch Prax 11:269–300

    CAS  Google Scholar 

  • Gminski R, Decker K, Heinz C, Seidel A, Könczöl M, Goldenberg E et al (2011) Genotoxic effects of three selected black toner powders and their dimethyl sulfoxide extracts in cultured human epithelial A549 lung cells in vitro. Environ Mol Mutagen 52:296–309

    Article  CAS  Google Scholar 

  • Goud KI, Shankarapppa K, Vijayashree B, Rao K, Ahuja Y (2001) DNA damage and repair studies in individuals working with photocopying machines. Int J Hum Genet 1:139–143

    Google Scholar 

  • Goud KI, Hasan Q, Balakrishna N, Rao KP, Ahuja YR (2004) Genotoxicity evaluation of individuals working with photocopying machines. Mutat Res 563:151–158

    Article  CAS  Google Scholar 

  • Hänninen O, Brüske-Hohlfeld I, Loh M, Stoeger T, Kreyling W, Schmid et al (2010) Occupational and consumer risk estimates for nanoparticles emitted by laser printers. J Nanopart Res 12:91–99

    Article  Google Scholar 

  • He C, Morawska L, Taplin L (2007) Particle emission characteristics of office printers. Environ Sci Technol 41:6039–6045

    Article  CAS  Google Scholar 

  • He C, Morawska L, Wang H, Jayaratne R, McGarry P, Johnson GR et al (2010) Quantification of the relationship between fuser roller temperature and laser printer emissions. J Aerosol Sci 41:523–530

    Article  CAS  Google Scholar 

  • Jaakkola MS, Yang LY, Ieromnimon A, Jaakkola JJK (2007) Office work, SBS and respiratory and sick building syndrome symptoms. Occup Environ Med 64:178–184

    Article  Google Scholar 

  • Kagi N, Fujii S, Horiba Y, Namiki N, Ohtani Y, Emi H et al (2007) Indoor air quality for chemical and ultrafine particle contaminants from printers. Build Environ 42:1949–1954

    Article  Google Scholar 

  • Koivisto AJ, Hussein T, Niemelä R, Tuomi T, Hämeri K (2010) Impact of particle emissions of new laser printers on modeled office room. Atmos Environ 44:2140–2146

    Article  CAS  Google Scholar 

  • Lee CW, Hsu DJ (2007) Measurements of fine and ultrafine particles formation in photocopy centers in Taiwan. Atmos Environ 41:6598–6609

    Article  CAS  Google Scholar 

  • Lee SC, Lam S, Fai HK (2001) Characterization of VOCs, ozone, and PM10 emissions from office equipment in an environmental chamber. Build Environ 36:837–842

    Article  Google Scholar 

  • Lin GHY, Mermelstein R (1994) Acute toxicity studies of Xerox reprographic toners. Int J Toxicol 13:2–20

    Article  CAS  Google Scholar 

  • Marconi A (2006) Fine, ultrafine and nano-particles in the living and working setting: potential health effects and measurement of inhalation exposure. G Ital Med Lav Ergon 28:258–265

    CAS  Google Scholar 

  • McGarry P, Morawska L, He C, Jayaratne R, Falk M, Tran Q et al (2011) Exposure to particles from laser printers operating within office workplaces. Environ Sci Technol 45:6444–6452

    Article  CAS  Google Scholar 

  • Morawska L, Salthammer T (2003) Indoor environment: airborne particles and settled dust. Wiley-VCH, Weinheim

    Google Scholar 

  • Morawska L, He C, Johnson G, Jayaratne R, Salthammer T, Wang H et al (2009) An investigation into the characteristics and formation mechanisms of particles originating from the operation of laser printers. Environ Sci Technol 43:1015–1022

    Article  CAS  Google Scholar 

  • Muñoz X, Roger A, De la Rosa D, Morell F, Cruz MJ (2007) Occupational vocal cord dysfunction due to exposure to wood dust and xerographic toner. Scand J Work Env Hea 33:153–158

    Article  Google Scholar 

  • Nakadate T, Yamano Y, Adachi C, Kikuchi Y, Nishiwaki Y, Nohara M et al (2006) A cross sectional study of the respiratory health of workers handling printing toner dust. Occup Environ Med 63:244–249

    Article  CAS  Google Scholar 

  • Nel A, Xia T, Mädler L, Li N (2006) Toxic potential of materials at the nanolevel. Science 311:622–627

    Article  CAS  Google Scholar 

  • Nel AE, Mädler L, Velegol D, Xia T, Hoek EM, Somasundaran P et al (2009) Understanding biophysicochemical interactions at the nano-bio interface. Nat Mater 8:543–557

    Article  CAS  Google Scholar 

  • Peters TM, Ott D, O'Shaughnessy PT (2006) Comparison of the Grimm 1.108 and 1.109 portable aerosol spectrometer to the TSI 3321 aerodynamic particle sizer for dry particles. Ann Occup Hyg 50:843–850

    Article  CAS  Google Scholar 

  • Pettersson T, Fogden A (2005) Spreading of individual toner particles studied using in situ optical microscopy. J Colloid Interface Sci 287:249–260

    Article  CAS  Google Scholar 

  • Rödelsperger K, Podhorsky S, Brückel B, Dahmann D, Hartfiel GD, Woitowitz HJ (2003) Physical characteristics and definitions of granular insoluble dusts. Eur J Oncol 8:103–112

    Google Scholar 

  • Schripp T, Wensing M, Uhde E, Salthammer T, He C, Morawska L (2008) Evaluation of ultrafine particle emissions from laser printers using emission test chambers. Environ Sci Technol 42:4338–4343

    Article  CAS  Google Scholar 

  • Schripp T, Mulakampilly SJ, Delius W, Uhde E, Wensing M, Salthammer T et al (2009) Comparison of ultrafine particle release from hardcopy devices in emission test chambers and office rooms. Gefahrst Reinhalt L 69:71–76

    Google Scholar 

  • Schulz H, Harder V, Ibald-Mulli A, Khandoga A, Koenig W, Krombach F et al (2005) Cardiovascular effects of fine and ultrafine particles. J Aerosol Med 18:1–22

    Article  CAS  Google Scholar 

  • Stefaniak AB, Breysse PN, Murray MPM, Rooney BC, Schaefer J (2000) An evaluation of employee exposure to volatile organic compounds in three photocopy centers. Environ Res 83:162–173

    Article  CAS  Google Scholar 

  • Wensing M, Schripp T, Uhde E, Salthammer T (2008) Ultra-fine particles release from hardcopy devices: sources, real-room measurements and efficiency of filter accessories. Sci Total Environ 407:418–427

    Article  CAS  Google Scholar 

  • Wolkoff P (1999) Photocopiers and indoor air pollution. Atmos Environ 33:2129–2130

    Article  CAS  Google Scholar 

  • Wolkoff P, Johnsen CR, Franck C, Wilhardt P, Albrechtsen O (1992) A study of human reactions to office machines in a climatic chamber. J Expo Anal Env Epid 1:71–97

    Google Scholar 

Download references

Acknowledgments

We thank Thomas Eikmann, Caroline Herr, and Anja zur Nieden from the Department Hygiene and Environmental Health for their valuable help in examining the office workers regarding health effects as well as Anja Schnecko, Department of Environmental and Indoor Toxicology of the Gießen University Medical Center. Additionally, we thank numerous colleagues, especially Michael Wensing, Günter Oberdörster, Hans-Jörn Moriske, and Christine Däumling, who critically reviewed our data and discussed the outcome and implications with us within the BfR risk assessment process. Furthermore, we cordially thank Joachim Schneider, Bernd Brückel, and Klaus Rödelsperger from the Department of Occupational Medicine at Gießen University Medical Centre for the electron microscope analysis. Klaus Rödelsperger, expert for TEM and REM analysis, sadly died unexpectedly during the study. Additionally, we thank Dirk Bültermann, Thomas Kreis, and Hans von Rechenberg for their valuable contribution as occupational physicians. Last but not the least, we thank the heads of the office units who contributed to the study, i.e., allowed us to perform parts of the study in their buildings.

The research project was funded by the German Federal Environment Agency and the German Federal Institute for Risk Assessment, Berlin.

Author information

Authors and Affiliations

  1. Department of Environmental Health Sciences, University Medical Center Freiburg, Breisacher Str. 115b, 79106, Freiburg, Germany

    Tao Tang, Julia Hurraß, Richard Gminski & Volker Mersch-Sundermann

Authors
  1. Tao Tang
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Julia Hurraß
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Richard Gminski
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Volker Mersch-Sundermann
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Julia Hurraß.

Additional information

Responsible editor: Euripides Stephanou

Electronic supplementary material

Below is the link to the electronic supplementary material.

ESM doc

(DOC 858 kb)

Rights and permissions

Reprints and permissions

About this article

Cite this article

Tang, T., Hurraß, J., Gminski, R. et al. Fine and ultrafine particles emitted from laser printers as indoor air contaminants in German offices. Environ Sci Pollut Res 19, 3840–3849 (2012). https://doi.org/10.1007/s11356-011-0647-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11356-011-0647-5

Keywords

Search

Navigation