Abstract
Background
Dynamic mechanical parameters are significant to study the dynamic evolution, but multiple constitutive parameters are difficult to be measured or calculated directly in various dynamic tests. This paper develops a dynamic integrated digital image correlation (DIC) inversion method to characterize multiple parameters of 2A12-T4 aluminum alloy for the split Hopkinson pressure bar (SHPB) test.
Methods
Affine transformation is used to construct virtual deformed images based on time-varying images of dynamic impacts and deformation responses of finite element method (FEM). Through imitating the principle of DIC, the image correlation function embedded the Johnson–Cook constitutive parameters is constructed. The optimal constitutive parameters are obtained by the gradient optimization algorithm when the images are most correlated.
Results
For dynamic tests of same strain rate, optimal parameters are obtained by substituting multiple experimental images to co-invert. By substituting inversion results into the FEM simulation, the simulated stress–strain curve is obtained. Meanwhile by extracting the stress–strain signals of multiple experiments, the real mean stress–strain curve is obtained. Through the coincidence of two stress–strain curves, the feasibility of dynamic integrated DIC inversion method and the accuracy of the inversion results are verified.
Conclusion
This dynamic inversion method is universal to obtain multiple parameters in various dynamic experiments, which considers the strain rate and time-varying. Besides this method simplifies the inversion process and obtains multiple dynamic parameters more easily.
Similar content being viewed by others
Data Availability
All data generated or used during the study appear in this article.
References
Zhang W, Wei G, Xiao X (2013) Constitutive relation and fracture criterion of 2A12 aluminum alloy. Acta Armamentarii 34(3):276–282
Wang C, Xu J, Chen X, Han C, Wang W, Luo X (2023). A modified Johnson–Cook model for 2A12 aluminum alloys. Mech Time Depend Mater 1–20
Pan B (2018) Digital image correlation for surface deformation measurement: historical developments, recent advances and future goals. Meas Sci Technol 29(8):082001–082032
Zhang X, Zhang K, Zhang D, Outeiro J, Ding H (2019) New in situ imaging-based methodology to identify the material constitutive model coefficients in metal cutting process. J Manuf Sci Eng 141(10):101007–101017
Chen X, Zhang K, Nie G, Zhang X (2021) Identification of plastic constitutive parameters of 45 steel based on in-situ imaging of cutting process. Aeronautical Manufacturing Technology 64(13):90–95
Bai R, Wei Y, Lei Z, Jiang H, Tao W, Yan C, Li X (2018) Local zone-wise elastic-plastic constitutive parameters of Laser-welded aluminium alloy 6061 using digital image correlation. Opt Lasers Eng 101:28–34
Zhao J, Wen H, Liu Z, Rong J, Xie H (2018) Single-camera displacement field correlation method for centrosymmetric 3D dynamic deformation measurement. Meas Sci Technol 29(5):055401–055407
Leclerc H, Périé J, Roux S, Hild F (2009) Integrated digital image correlation for the identification of mechanical properties. 4th International Conference. Springer, Berlin, Heidelberg, pp 161–171
Bertin M, Hild F, Roux S, Mathieu F, Leclerc H, Aimedieu P (2016) Integrated digital image correlation applied to elastoplastic identification in a biaxial experiment. The Journal of Strain Analysis for Engineering Design 51(2):118–131
Neggers J, Hoefnagels J, Geers MGD, Hild F, Roux S (2015) Time-resolved integrated digital image correlation. Int J Numer Meth Eng 103(3):157–182
Chandran S, Verleysen P (2018) Inverse modelling with integrated digital image correlation and finite element method for estimation of static and dynamic fracture parameters. In 18th International Conference on Experimental Mechanics
Zhao J, Li Y, Zhang H, Liu Z, Xie H, Liu S (2023) Characterization of Thermo-mechanical parameters of Nickel-Based single crystal superalloys under high-temperature by modified I-DIC method. Opt Laser Technol 163:109371
Gazeau C, Gillibert J, Blond E, Geffroy PM, Richet N (2015) Experimental set up for the mechanical characterization of plane ITM membrane at high temperature. J Eur Ceram Soc 35(14):3853–3861
Dong J, Liu Z, Gao J (2017) Multi-parameter inversion and thermo-mechanical deformation decoupling using I-DIC. Exp Mech 57(1):1–9
Cai S, Wu D, Zhou J, Zhang C, Liu Z, Liu S (2021) Improvement and application of miniature Hopkinson bar device based on series-parallel coil array electromagnetic launch. Measurement 186:110203
Cai S, Zhang C, Liu Z, Wang X (2023) Development of Miniature Tensile-Test System of Intermediate Strain Rate Based on Electromagnetic Launch. J Eng Mech 149(11):04023093
Chen WW, Song B (2010) Split Hopkinson (Kolsky) bar: design, testing and applications. Springer Science & Business Media
Johnson GR, Cook WH (1983) A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures. Proceedings of the seventh international symposium on ballistics. Hague
Pan B, Qian K, Xie H, Asundi A (2009) Topical review: two-dimensional digital image correlation for in-plane displacement and strain measurement: a review. Meas Sci Technol 20(6):152–154
Dufour JE, Hild F, Roux S (2014) Integrated digital image correlation for the evaluation and correction of optical distortions. Opt Lasers Eng 56:121–133
Pan B, Xie H, Wang Z (2010) Equivalence of digital image correlation criteria for pattern matching. Appl Opt 49(28):5501–5509
Funding
This work was financially supported by the National Natural Science Foundation of China (grant nos. 12372178, 12327801) and the National Natural Science Foundation of China (12302247).
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of Interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Cai, S., Zhao, J., Liu, Z. et al. Development and Application of Dynamic Integrated DIC Material Parameters Inversion Method for SHPB Tests. Exp Mech (2024). https://doi.org/10.1007/s11340-024-01071-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11340-024-01071-z