Avoid common mistakes on your manuscript.
Correction to: Experimental Mechanics (2019) 59:79–94
Due to an error introduced during the production process, Fig. 11 appeared incorrectly in the original publication of this article. It appears correctly here.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The online version of the original article can be found at https://doi.org/10.1007/s11340-018-0433-0
Rights and permissions
About this article
Cite this article
Alegre, J., Díaz, A., Cuesta, I. et al. Correction to: Analysis of the Influence of the Thickness and the Hole Radius on the Calibration Coefficients in the Hole-Drilling Method for the Determination of Non-uniform Residual Stresses. Exp Mech 60, 1173–1174 (2020). https://doi.org/10.1007/s11340-019-00505-3
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-019-00505-3