Abstract
In this study, real-time displacement measurement of bridges was carried out by means of digital image processing techniques. This is innovative, highly cost-effective and easy to implement, and yet maintains the advantages of dynamic measurement and high resolution. First, the measurement point is marked with a target panel of known geometry. A commercial digital video camera with a telescopic lens is installed on a fixed point away from the bridge (e.g., on the coast) or on a pier (abutment), which can be regarded as a fixed point. Then, the video camera takes a motion picture of the target. Meanwhile, the motion of the target is calculated using image processing techniques, which require a texture recognition algorithm, projection of the captured image, and calculation of the actual displacement using target geometry and the number of pixels moved. Field tests were carried out for the verification of the present method. The test results gave sufficient dynamic resolution in amplitude as well as the frequency. Use of this technology for a large suspension bridge is discussed considering the characteristics of such bridges having low natural frequencies within 3 Hz and the maximum displacement of several centimeters.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Xu L, Guo JJ, Jiang JJ (2002) Time-frequency analysis of a suspension bridge based on GPS. J Sound Vib 254(1): 105–116.
Meo M, Zumpano G, Meng X, Cosser E, Roberts G, Dodson A (2005) Measurement of dynamic properties of a medium span suspension bridge by using the wavelet transforms. Mech Syst Signal Process, in press.
Nassif HH, Gindy M, Davis J (2005) Comparison of laser Doppler vibrometer with contact sensors for monitoring bridge deflection and vibration. NDT E Int 38:213–218.
Pieraccinia M, Luzia G, Mecattia D, Fratinia M, Noferinia L, Carissimib L, Franchionib G, Atzenia C (2004) Remote sensing of building structural displacements using a microwave interferometer with imaging capability. NDT E Int 37:545–550.
Faulkner BC, Furman WB, Thomas TB, Wallace TM (1996) Determination of bridge response using acceleration data. Report No. FHWA/VA-97-R5, Virginia Department of Transportation.
Park K-T, Kim S-H, Park H-S, Lee K-W (2005) The determination of bridge displacement using measured acceleration. Eng Struct 27:371–378.
Kim NS, Cho NS (2004) Estimating deflection of a simple beam model using fiber optic Bragg-grating sensors. Exp Mech 44:433–439.
Stephen GA, Brownjohn JMW, Taylor CA (1993) Visual monitoring of the Humber Bridge. Eng Struct 15:197–208.
Olaszek P (1999) Investigation of the dynamic characteristic of bridge structures using a computer vision method. Measurement 25:227–236.
Wahbeh AM, Caffrey JP, Masri SF (2003) A vision-based approach for the direct measurement of displacements in vibrating systems. Smart Mater Struct 12:785–794. 114
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lee, J.J., Shinozuka, M. Real-Time Displacement Measurement of a Flexible Bridge Using Digital Image Processing Techniques. Exp Mech 46, 105–114 (2006). https://doi.org/10.1007/s11340-006-6124-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11340-006-6124-2