Abstract
In this study, a novel magnetic hydroxyapatite/chitosan composite (HA/Fe3O4/CS) prepared from steel slag, shrimp shells, and bovine bones, and then cross-linked with a green tea extract was used as an adsorbent for Ni(II) ion removal from aqueous solution. Various techniques (SEM, FTIR, XRD, VSM) were used to characterize the adsorbent. Batch experiments were conducted to investigate the adsorption properties of Ni(II) ions on HA/Fe3O4/CS. The optimum conditions for the adsorption process were studied in detail. The adsorption isotherm, mechanism, kinetics, and thermodynamics were further discussed. Besides, the desorption and reusability of the adsorbent were evaluated for further applications. The results indicated that the HA/Fe3O4/CS composite has the potential application for removal of Ni(II) ions from aqueous solution with a maximum adsorption capacity of 112.36 mg/g at optimal conditions (pH of 6, contact time of 60 min, room temperature, and adsorbent dose of 3 g/L). The adsorption process of Ni(II) on HA/Fe3O4/CS was feasible, spontaneous, exothermic, and more favorable at lower temperature. Adsorption isotherm and kinetics were suitable to be described by the Langmuir model and pseudo-second-order kinetic equation, respectively. Recycling results confirmed that the HA/Fe3O4/CS composite maintains a great reusability potential for five consecutive cycles with Ni(II) removal efficiency of greater than 85%. The adsorbent can be easily regenerated by using HCl and EDTA solutions. The overall study revealed that the magnetic hydroxyapatite/chitosan composite can be applied as a low cost, environmental friendly, and highly efficient adsorbent for removal of Ni(II) ions from wastewater because of its high adsorption capacity, easy recovery, and good reusability.
This is a preview of subscription content, access via your institution.
References
Abu-Saied, M. A., Wycisk, R., Abbassy, M. M., El-Naim, G. A., Demerdash, F. E., Youssef, M. E., Bassuony, H., & Pintauro, P. N. (2017). Sulfated chitosan/PVA absorbent membrane for removal of copper and nickel ions from aqueous solutions—fabrication and sorption studies. Carbohydrate Polymers, 165, 149–158. https://doi.org/10.1016/j.carbpol.2016.12.039.
Admassu, W., & Breese, T. (1999). Feasibility of using natural fish bone apatite as a substitute for hydroxyapatite in remediating aqueous heavy metals. Journal of Hazardous Materials, 69(2), 187–196. https://doi.org/10.1016/S0304-3894(99)00102-8.
Ahmet, E., Nüket, T., Tülin, A., Seda, B., & Ayse, D. (2012). Removal of nickel (II) ions by histidine modified chitosan beads. Chemical Engineering Journal, 210, 590–596. https://doi.org/10.1016/j.cej.2012.09.020.
Alomá, I., Martín-Lara, M. A., Rodríguez, I. L., Blázquez, G., & Calerob, M. (2012). Removal of nickel (II) ions from aqueous solutions by biosorption on sugarcane bagasse. Journal of the Taiwan Institute Chemical Engineers, 43(2), 275–281. https://doi.org/10.1016/j.jtice.2011.10.011.
Ancuta, M. S., Radu, B., Elena, M. A., Cornelia, A. M., & Speranta, T. (2014). Thermal and structural characterization of synthetic and natural nanocrystalline hydroxyapatite. Materials Science Engineering: C, 43, 153–163. https://doi.org/10.1016/j.msec.2014.07.023.
Arshadi, M., Amiri, M. J., & Mousavi, S. (2014). Kinetic, equilibrium and thermodynamic investigations of Ni(II), Cd(II), Cu(II) and Co(II) adsorption on barley straw ash. Water Resources and Industry, 6, 1–17. https://doi.org/10.1016/j.wri.2014.06.001.
Ayhan, S. I., & Mahmut, O. (2008). Biosorption of Cu (II) from aqueous solutions by mimosa tanin gel. Journal of Hazardous Materials, 157(2–3), 277–285. https://doi.org/10.1016/j.jhazmat.2007.12.115.
Bahrololooma, M. E., Javidi, M., Javadpoura, S., & Mab, J. (2009). Characterisation of natural hydroxyapatite extracted from bovine cortical bone ash. Journal of Ceramic Processing Research, 10(2), 129–138.
Cui, J., Li, Y., Meng, J., Zhong, C., & Wang, P. (2017). Synthesis of chelating polyamine fibers and their adsorption properties for nickel(II) ions from aqueous solution. RSC Advances, 7(64), 40392–40400. https://doi.org/10.1039/C7RA06935A.
Dinu, M. V., & Dragan, E. S. (2010). Evaluation of Cu2+, Co2+ and Ni2+ ions removal from aqueous solution using a novel chitosan/clinoptilolite composite: kinetics and isotherms. Chemical Engineering Journal, 160(1), 157–163. https://doi.org/10.1016/j.cej.2010.03.029.
Dorozhkin, S. V. (2015). Calcium orthophosphate-containing biocomposites and hybrid biomaterials for biomedical applications. Journal of Functional Biomaterials, 6(3), 708–832. https://doi.org/10.3390/jfb6030708.
Eser, A., Nüket, T. V., Aydemir, T., Becerik, S., & Dincer, A. (2012). Removal of nickel(II) ions by histidine modified chitosan beads. Chemical Engineering Journal, 210, 590–596. https://doi.org/10.1016/j.cej.2012.09.020.
Eveliina, R., Jolanta, K. W., Tonni, A. K., & Mika, E. T. S. (2010). Adsorption of Co(II) and Ni(II) by EDTA- and/or DTPA-modified chitosan: kinetic and equilibrium modeling. Chemical Engineering Journal, 161(1–2), 73–82. https://doi.org/10.1016/j.cej.2010.04.030.
Fan, C., Li, K., Wang, Y., Qian, X., & Jia, J. (2016). The stability of magnetic chitosan beads in the adsorption of Cu2+. RSC Advances, 6, 2678–2686. https://doi.org/10.1039/C5RA20943A.
Giri, S., Das, N., & Pradhan, G. (2011). Magnetite powder and kaolinite derived from waste iron ore tailings for environmental applications. Powder Technology, 214(3), 513–518. https://doi.org/10.1016/j.powtec.2011.09.017.
Guo, N., Su, S. J., Liao, B., Ding, S. L., & Sun, W. Y. (2017). Preparation and properties of a novel macro porous Ni2+-imprinted chitosan foam adsorbents for adsorption of nickel ions from aqueous solution. Carbohydrate Polymers, 165, 376–383. https://doi.org/10.1016/j.carbpol.2017.02.056.
Harikishore, K. R. D., & Seung-Mok, L. (2013). Application of magnetic chitosan composites for the removal of toxic metal and dyes from aqueous solutions. Advances in Colloid and Interface Science, 201–202, 68–93. https://doi.org/10.1016/j.cis.2013.10.002.
Heidari, F., Razavi, M., Ghaedi, M., Forooghi, M., Tahriri, M., & Tayebi, L. (2016). Investigation of mechanical properties of natural hydroxyapatite samples prepared by cold isostatic pressing method. Journal of Alloys and Compounds, 693, 1150–1156. https://doi.org/10.1016/j.jallcom.2016.10.081.
Huijuan, H., Ronghui, Z., Peng, W., & Lan, W. (2012). Removal of Congo red dye from aqueous solution with hydroxyapatite/chitosan composite. Chemical Engineering Journal, 211–212, 336–342. https://doi.org/10.1016/j.cej.2012.09.100.
Javad, S., & Leila, J. (2014). Chitosan decorated Fe3O4 nanoparticles as a magnetic catalyst in the synthesis of phenytoin derivatives. RSC Advances, 4, 48973–48979. https://doi.org/10.1039/C4RA06618A.
Jianlan, C., Yanru, L., Jian, M., Congsan, Z., & Peng, W. (2017). Synthesis of chelating polyamine fibers and their adsorption properties for nickel(II) ions from aqueous solution. RSC Advances, 7, 40392–40400. https://doi.org/10.1039/C7RA06935A.
Josep, O., Joan, D. P., José-Luis, C., Jordi, C., & Carlos, A. (2011). Removal of cadmium, copper, nickel, cobalt and mercury from water by ApatiteII TM: Column experiments. Journal of Hazardous Materials, 194, 312–323. https://doi.org/10.1016/j.jhazmat.2011.07.104.
Langmuir, I. (1918). The adsorption of gases on plane surfaces of glass, mica and platinum. Journal of the American Chemical Society, 40(9), 1361–1403. https://doi.org/10.1021/ja02242a004.
Le, V. T., Tran, B. C., Tran, T. K. N., Tran, X. V., Dinh, D. N., Nguyen, M. H., Dang, T. T. T., Nguyen, T. H., & Le, H. S. (2017). Preparation of cross-linked magnetic chitosan particles from steel slag and shrimp shells for removal of heavy metals. Environmental Technology. https://doi.org/10.1080/09593330.2017.1337236.
Lei, Z., Yuexian, Z., & Zhengjun, C. (2016). Removal of heavy metal ions using chitosan and modified chitosan: a review. Journal of Molecular Liquids, 214, 175–191. https://doi.org/10.1016/j.molliq.2015.12.013.
Li, J., Jiang, B., Liu, Y., Qiu, C., Hu, J., Qian, G., Guo, W., & Ngo, H. H. (2017). Preparation and adsorption properties of magnetic chitosan composite adsorbent for Cu2+ removal. Journal of Cleaner Production, 158, 51–58. https://doi.org/10.1016/j.jclepro.2017.04.156.
Lijing, D., Zhiliang, Z., Yanling, Q., & Jianfu, Z. (2010). Removal of lead from aqueous solution by hydroxyapatite/magnetite composite adsorbent. Chemical Engineering Journal, 165(3), 827–834. https://doi.org/10.1016/j.cej.2010.10.027.
Lim, A. P., & Aris, A. Z. (2014). A review on economically adsorbents on heavy metals removal in water and wastewater. Reviews in Environmental Science and Biotechnology, 13(2), 163–181. https://doi.org/10.1007/s11157-013-9330-2.
Limei, C., Yaoguang, W., Lihua, H., Liang, G., Bin, D., & Qin, W. (2015). Mechanism of Pb(II) and methylene blue adsorption onto magnetic carbonate hydroxyapatite/graphene oxide. RSC Advances, 5, 9759–9770. https://doi.org/10.1039/C4RA13009J.
Lingling, Q., Jianzhong, J., Hefei, S., & Zhijun, L. (2016). One-step synthesis of Fe3O4/carboxylate-rich carbon composite and its application for Cu(II) removal. New Journal of Chemistry, 40, 2895–2903. https://doi.org/10.1039/C5NJ02545A.
Lu, P. J., Hu, W. W., Chen, T. S., & Chern, J. M. (2010). Adsorption of copper-citrate complexes on chitosan: equilibrium modeling. Bioresource Technology, 101(4), 1127–1134. https://doi.org/10.1016/j.biortech.2009.09.055.
Majid, A., Mohammad, I., Jabir, I., & Saeed, N. (2014). Design and evaluation of chitosan/hydroxyapatite composite nanofiber membrane for the removal of heavy metal ions from aqueous solution. Journal of Taiwan Institute of Chemical Engineers, 45(2), 518–526. https://doi.org/10.1016/j.jtice.2013.04.016.
Mobasherpour, I., Salahi, E., & Pazouki, M. (2011). Removal of nickel (II) from aqueous solutions by using nano-crystalline calcium hydroxyapatite. Journal of Saudi Chemical Society, 15(2), 105–112. https://doi.org/10.1016/j.jscs.2010.06.003.
Modin, H., Persson, K. M., Andersson, A., & Van, P. M. (2011). Removal of metals from landfill leachate by sorption to activated carbon, bone meal and iron fines. Journal of Hazardous Materials, 189(3), 749–754. https://doi.org/10.1016/j.jhazmat.2011.03.001.
Mohammad, K. (2017). A review on the adsorption of heavy metals by clay minerals, with special focus on the past decade. Chemical Engineering Journal, 308, 438–462. https://doi.org/10.1016/j.cej.2016.09.029.
Mohanasrinivasan, V., Mishra, M., Paliwal, J. S., Paliwal, J. S., Singh, S. K., Selvarajan, E., Suganthi, V., & Subathra, C. D. (2014). Studies on heavy metal removal efficiency and antibacterial activity of chitosan prepared from shrimp shell waste. 3 Biotech, 4(2), 167–175. https://doi.org/10.1007/s13205-013-0140-6.
Monier, M., Ayad, D. M., Wei, Y., & Sarhan, A. A. (2010). Adsorption of Cu(II), Co(II), and Ni(II) ions by modified magnetic chitosan chelating resin. Journal of Hazardous Materials, 177(1–3), 962–970. https://doi.org/10.1016/j.jhazmat.2010.01.012.
Neha, G., Atul, K. K., & Chattopadhyaya, M. C. (2012). Adsorptive removal of Pb2+, Co2+ and Ni2+ by hydroxyapatite/chitosan composite from aqueous solution. Journal of the Taiwan Institute of Chemical Engineers, 43(1), 125–131. https://doi.org/10.1016/j.jtice.2011.07.009.
Nzihou, A., & Sharrock, P. (2010). Role of phosphate in the remediation and reuse of heavy metal polluted wastes and sites. Waste and Biomass Valorization, 1(1), 163–174. https://doi.org/10.1007/s12649-009-9006-x.
Oladoja, N. A., Alliu, Y. B., Ofomaja, A. E., & Unuabonah, I. E. (2011). Synchronous attenuation of metal ions and colour in aqua stream using tannin–alum synergy. Desalination, 271(1–3), 34–40. https://doi.org/10.1016/j.desal.2010.12.008.
Pan, H., Chaoting, S., Lan, W., & Xiandeng, H. (2016). Chitosan/hydroxyapatite/Fe3O4 magnetic composite for metal-complex dye AY220 removal: recyclable metal-promoted Fenton-like degradation. Microchemical Journal, 128, 218–225. https://doi.org/10.1016/j.microc.2016.04.022.
Paulino, A. T., Guilherme, M. R., Reis, A. V., Tambourgi, E. B., Nozaki, J., & Muniz, E. C. (2007). Capacity of adsorption of Pb2+ and Ni2+ from aqueous solutions by chitosan produced from silkworm chrysalides in different degrees of deacetylation. Journal of Hazardous Materials, 147(1–2), 139–147. https://doi.org/10.1016/j.jhazmat.2006.12.059.
Piar, C., & Yogesh, B. P. (2015). Synthesis and characterization of hydroxyapatite nanoparticles impregnated on apple pomace to enhanced adsorption of Pb(II), Cd(II), and Ni(II) ions from aqueous solution. Environmental Science and Pollution Research, 22(14), 10919–10929. https://doi.org/10.1007/s11356-015-4276-2.
Pivarčiová, L., Rosskopfová, O., Galamboš, M., & Rajec, P. (2014). Sorption of nickel on chitosan. Journal of Radioanalytical and Nuclear Chemistry, 300(1), 361–366. https://doi.org/10.1007/s10967-014-3007-3.
Reza, B. L., Hamid, R. Z., Mohammad, E. B., & Afshin, N. (2014). Removal of Cu(II) ions from aqueous solutions by low-cost natural hydroxyapatite/chitosan composite: equilibrium, kinetic and thermodynamic studies. Journal of the Taiwan Institute of Chemical Engineers, 45(4), 1642–1648. https://doi.org/10.1016/j.jtice.2013.11.009.
Rosskopfova, O., Galambos, M., Pivarciova, L., Caplovicova, M., & Rajec, P. (2013). Adsorption of nickel on synthetic hydroxyapatite from aqueous solutions. Journal of Radioanalytical and Nuclear Chemistry, 295(1), 459–465. https://doi.org/10.1007/s10967-012-1799-6.
Sivashankar, R., Sathya, A. B., Vasantharaj, K., & Sivasubramanian, V. (2014). Magnetic composite an environmental super adsorbent for dye sequestration—a review. Environmental Nanotechnology, Monitoring & Management, 1-2, 36–49. https://doi.org/10.1016/j.enmm.2014.06.001.
Solovtsova, O. V., Grankina, T. Y., Krasilˇnikova, O. K., Serebryakova, N. V., Shinkarev, S. M., & Voloshchuk, A. M. (2008). The effect of the dehydratation conditions of chitosan-based polymer adsorbents on the adsorption of nickel cations. Colloid Journal, 70(3), 341–348. https://doi.org/10.1134/S1061933X08030125.
Tran, H. V., Tran, L. D., & Nguyen, T. N. (2010). Preparation of chitosan/magnetite composite beads and their application for removal of Pb(II) and Ni(II) from aqueous solution. Materials Science and Engineering: C, 30(2), 304–310. https://doi.org/10.1016/j.msec.2009.11.008.
Wan, N. W. S., Teong, L. C., & Hanafiah, M. A. K. M. (2011). Adsorption of dyes and heavy metal ions by chitosan composites: a review. Carbohydrate Polymers, 83(4), 1446–1456. https://doi.org/10.1016/j.carbpol.2010.11.004.
Wu, S.-P., Dai, X.-Z., Kan, J.-R., Shilong, F.-D., & Zhu, M.-Y. (2017). Fabrication of carboxymethyl chitosan–hemicellulose resin for adsorptive removal of heavy metals from wastewater. Chinese Chemical Letters, 28(3), 625–632. https://doi.org/10.1016/j.cclet.2016.11.015.
Xianmiao, C., Yubao, L., Yi, Z., Li, Z., Jidong, L., & Huanan, W. (2009). Properties and in vitro biological evaluation of nano-hydroxyapatite/chitosan membranes for bone guided regeneration. Materials Science and Engineering: C, 29(1), 29–35. https://doi.org/10.1016/j.msec.2008.05.008.
Ying-Sing, L., Jeffrey, S. C., & Andrea, L. W. (2012). Infrared and Raman spectroscopic studies on iron oxide magnetic nano-particles and their surface modifications. Journal of Magnetism and Magnetic Materials, 324(8), 1543–1550. https://doi.org/10.1016/j.jmmm.2011.11.065.
Yong, L., Jun-Jie, G., Wei, C., Qin-Fei, K., Chang-Qing, Z., & Ya-Ping, G. (2015). Fabrication of hydroxyapatite/chitosan porous materials for Pb(II) removal from aqueous solution. RSC Advances, 5, 25462–25470. https://doi.org/10.1039/C5RA01628B.
Zareie, C., Najafpour, G., & Sharifzadehbaei, M. (2013). Preparation of nanochitosan as an effective sorbent for removal of copper ions from aqueous solutions. International Journal of Engineering, Transactions B: Applications, 26(8), 829–836.
Zhang, J., Li, Y., Zhang, C., & Jing, Y. (2008). Adsorption of malachite green from aqueous solution onto carbon prepared from Arundo donax root. Journal of Hazardous Materials, 150(3), 774–782. https://doi.org/10.1016/j.jhazmat.2007.05.036.
Acknowledgments
This work was funded by the Vietnam National Foundation for Science and Technology Development (NAFOSTED) (grant number 106.NN.02-2015.13).
Author information
Authors and Affiliations
Contributions
The manuscript was written through contributions of all authors. All authors have given approval to the final of the manuscript.
Corresponding authors
Rights and permissions
About this article
Cite this article
Le, V.T., Doan, V.D., Nguyen, D.D. et al. A Novel Cross-Linked Magnetic Hydroxyapatite/Chitosan Composite: Preparation, Characterization, and Application for Ni(II) Ion Removal from Aqueous Solution. Water Air Soil Pollut 229, 101 (2018). https://doi.org/10.1007/s11270-018-3762-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s11270-018-3762-9
Keywords
- Ni(II) ions removal
- Cross-linked magnetic hydroxyapatite/chitosan
- Adsorption
- Steel slag
- Shrimp shells
- Green tea