Abstract
Heavy metals are present in a variety of products and can be released to the environment during product life cycles. The concentration of metals in municipal solid waste (MSW) reflects the amount of metals in products and is directly related to the amount of metals transferred to disposal sites. Measured monthly mean concentrations of cadmium, lead, and mercury in the ash from May 1995 through October 2007 at the Essex County, NJ incinerator and from May 2004 through November 2007 at the Warren County, NJ incinerator were used, along with air emissions data for mercury, to estimate the content of these metals in MSW. Estimated mean concentration and 95% confidence limits for cadmium in MSW at the Essex and Warren facilities, respectively, were 17.4 ± 0.1 and 10.1 ± 1.2 ppm. For lead, the corresponding values were 408 ± 41 and 239 ± 42 ppm, and for mercury, they were 2.6 ± 0.2 and 0.9 ± 0.2 ppm. A trend of increasing cadmium concentrations was found at both facilities. No change vs. time was observed in lead concentrations. Mercury concentration was found to be decreasing over time at the Essex facility.
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig1_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig2_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig3_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig4_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig5_HTML.gif)
![](http://media.springernature.com/m312/springer-static/image/art%3A10.1007%2Fs11270-009-0111-z/MediaObjects/11270_2009_111_Fig6_HTML.gif)
Similar content being viewed by others
References
Arsova, L., van Haaren, R., Goldstein, N., Kaufman, S., & Themelis, N. (2008). The state of garbage in America. Biocycle, 49, 22–24.
Aucott, M. (2006). The fate of heavy metals in landfills: A review, prepared for the “Industrial Ecology, Pollution Prevention and the NY-NJ Harbor” Project of the New York Academy of Sciences, http://www.nyas.org/programs/harbor/06_LFmetals.pdf
Boehme, S., & Panero, M. (2003). Pollution prevention and management strategies for cadmium in New York/New Jersey Harbor, New York Academy of Sciences, www.nyas.org
Brooks, W. E. (2006). Minerals year book: mercury. U.S. Geological Survey, 2006, from http://minerals.usgs.gov/minerals/pubs/commodity/mercury, downloaded 3/28/08.
Cain, A., Disch, S., Twaroski, C., Reindl, J., & Case, C. R. (2007). Substance flow analysis of mercury intentionally used in products in the United States. Journal of Industrial Ecology, 11, 61–75.
Carlin, J. F. Jr., Smith, G. R., & Xiaoyu, B. (2006). Minerals year book: lead. US Geological Survey, 2006, from http://minerals.usgs.gov/minerals/pubs/commodity/lead, 3/28/08.
Chillrud, S. N., Bopp, R. F., Simpson, H. J., Ross, J. M., Shuster, E. L., Chaky, D. A., et al. (1999). Twentieth century atmospheric metal fluxes into Central Park Lake, New York City. Environmental Science and Technology, 33(5), 657–662.
Clapp, T. L., Magee, J. F., II, Ahlert, R. C., & Kosson, D. S. (1988). Municipal solid waste composition and the behavior of metals in incinerator ashes. Environmental Progress, 7(1), 22–30.
Morselli, L., Bartoli, M., Brusori, B., & Passarini, F. (2002). Application of an integrated environmental monitoring system to an incineration plant. Science of the Total Environment, 289, 177–188.
Plachy, J. (2000) Minerals yearbook: cadmium. U.S. Geological Survey, 2000, from http://minerals.usgs.gov/minerals/pubs/commodity/cadmium, downloaded 11/15/05.
Plachy, J. (2003). Minerals yearbook: cadmium. US Geological Survey, 2003, from http://minerals.usgs.gov/minerals/pubs/commodity/cadmium, downloaded 11/15/05.
Reiman, D. O. (1989). Heavy metals in domestic refuse and their distribution in incinerator residues. Waste Management and Research, 7, 57–62.
Smith, G. (2000). Minerals yearbook: lead. US Geological Survey, 2000, from http://minerals.usgs.gov/minerals/pubs/commodity/lead/#pubs, downloaded 5/14/2009.
Smith, G. R. (2008). Mineral commodity summaries: lead. US Geological Survey, 2008, from http://minerals.usgs.gov/minerals/pubs/commodity/lead, downloaded 3/28/08.
US Bureau of Mines (1990). Minerals Yearbook 1990. from http://digital.library.wisc.edu/1711.dl/EcoNatRes.MinYB1990v1, downloaded 5/13/2009.
USEPA. (1992). Characterization of products containing mercury in municipal solid waste in the United States, 1970 to 2000. Washington, DC: USEPA. EPA530-R-92-013.
Walsh, D. C., Chillrud, S. N., Simpson, H. J., & Bopp, R. F. (2001). Refuse incinerator particulate emissions and combustion residues for New York City during the 20th Century. Environmental Science and Technology, 35, 2441–2447.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Aucott, M., Namboodiripad, A., Caldarelli, A. et al. Estimated Quantities and Trends of Cadmium, Lead, and Mercury in US Municipal Solid Waste Based on Analysis of Incinerator Ash. Water Air Soil Pollut 206, 349–355 (2010). https://doi.org/10.1007/s11270-009-0111-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11270-009-0111-z