Abstract
A reduction in the amount of available clean water is a universal problem, and the harvest of rainwater is one of the methods that can solve this issue. In this study, the smallest reservoir capacity that can collect rainwater falling on roofs is defined, using daily rainfall data spanning a 32-year period for the cities Burdur, Isparta, and Antalya. Reservoir capacities with different roof areas being able to serve different needs are expressed using graphics. Particle swarm optimization (PSO) is compared with classic methods like the mass curve method, and the minimum flaw method. While the mass curve method provides the best results among the classic methods, PSO offers similar results. This study is divided into two sections. The first section includes the optimization model, which is defined for annual fixed needs. The software created in this section is compared with the results obtained from the other methods and its accuracy is proven. In the second section, the software is created according to users’ changing needs, which is not available for the other methods. The biggest advantage of the software is to be able to define optimum reservoir capacity in accordance with changing water needs and user risk perception. In this paper, a sample study is conducted to show the difference between fixed needs and changing needs, with the advantage acquired via optimization according to changing needs being shown.
Similar content being viewed by others
References
Bayazıt M (1997) Design and operation of storage reservoir. Istanbul Technical University Faculty of Civil Engineering Printing Office, Istanbul
Bergh FVD, Engelbrecht A (2006) A study of particle swarm optimization particle trajectories. Inf Sci 176:937–971
Campisano A, Modica C (2014) Selectimg time scale resolution to evaluate water saving and retention potential of rainwater harvesting tanks. Procedia Engineering 70:218–227
Eberthart R, Kennedy J (1995) A new optimizer using particle swarm theory. Proceedings of the Sixth International Symposium on Micro Machine and Human Science, Nagoya
Ercin AE, Hoesktra AY (2014) Water footprint scenarios for 2050: a global analysis. Environment International Ecology 64:71–82
Ghisi E, Bressan DL, Martini M (2007) Rainwater tank capacity and potential for potable water savings by using rainwater in the residental sector of southeastern Brazil. Build Environ 42:1654–1666
Gurung TR, Sharma A (2014) Communal rainwater tank systems design and economies of scale. J Clean Prod 67:26–36
Gwenzi W, Dunjana N, Pisa C, Tauro T, Nyamadzawo G (2015) Water quality and public health risks associated with roof rainwater harvesting systems for potable supply: review and perspectives. Sustainability of Water Quality and Ecology 6:107–118
Halden E, Ozkul S (2004) Determination of reservoir capacity with critical period methods DEU Engineering Faculty. J Sci Eng 6:99–113
Imteaz MA, Shanableh A, Rahman A, Ahsan A (2011) Optimisation of rainwater tank design from large roofs: a case study in Melbourne, Australia. Resour Conserv Recycl 55:1022–1029
Kennedy J, Eberhart R (1995) Particle swarm optimization. Systems Man and Cybernetics Part A, 95
Kou C, Wang Y, Chang H, Wu J (2017) Regional co-generation energy dispatch using a dual objective improved particle swarm optimization algorithm taking into account both economy and environment. Journal of Environmental Protection and Ecology 18:1328-1336
Lani NHM, Yosup Z, Syfiuddin A (2018) A review of rainwater harvesting in Malaysia: prospects and challenges. Water 10:506–526
Matos C, Santos C, Pereira S, Bentes I, Imteaz M (2013) Rainwater storage tank sizing: case study of a commercial building. Int J Sustain Built Environ 2:109–118
McMahon T, Mein R (1986) River and reservoir yield. Water Resources Publication, Canada
Molaei O, Kouchakzadeh M, Fashi FH (2018) Evaluation of rainwater harvesting performance for water supply in cities with cold and semi-arid climate. Water Supply 19-5:1322–1329
Montoya MG, Martinez AB, Rivera FN, Gonzales JMP, Ortega MM, Halwagi E (2015) Simultaneous design of water reusing and rainwater harvesting systems in a residental complex. Comput Chem Eng 76:104–116
Ndeketeya A, Dundu M (2019) Maximising the benefits of rainwater harvesting technology towards sustainability in urban areas of South Africa: a case study. Urban Water J 16-2:163–169
Ojwang RO, Dietrich J, Anebagilu PK, Beyer M, Rottensteiner F (2017) Rooftop rainwater harvesting for Mombasa: scenario development with image classification and water resources simulation. Water 9:359–368
Oki T, Agata Y, Kanae S, Saruhashi T, Yang D, Musiake K (2001) Global assessment of current water resources using total runoff integrating pathways. Hydrol Sci J 46:983–995
Ortakcı Y, Gologlu C (2012) Determination of cluster numbers via particle swarm optimization. Academic Information, Usak
Ozcakar N, Basti M (2012) The particle swarm optimization algorithm for the p-median location problem. Istanbul University Journal of the School of Business Administration 41:241–257
Ozsaglam Y, Cunkas M (2008) Particle swarm optimization algorithm for solving optimization problems. J Polytech 11:299–305
Ozyavuz M, Donmez Y (2014) Monitoring the changing position of coastlines using information technologies, an example of Tekirdağ. J Environ Prot Ecol 15:1051–1058
Raimondi A, Becciu G (2014) Probabilistic design of multi-use rainwater tanks. Procedia Engineering 70:1391–1400
Sample DJ, Liu J (2014) Optimizing rainwater harvesting systems for the dual purposes of water supply and runoff capture. J Clean Prod 75:174–194
Santos C, Pinto FT (2013) Analysis of different criteria to size rainwater storage tanks using detailed methods. Resour Conserv Recycl 71:1–6
Shi Y, Eberhart RC (1999) Empirical study of particle swarm optimization. Proceedings of the Congress on Evolutionary Computation, Washington
Tas E, Kilit M (2015) Evaluation of different methods in determination of reservoir volume: Afyonkarahisar Sandıklı Kızılca Dam case. 4th Water Structures Symposium, Antalya 469-478 (in Turkish)
Usul N (2008) Engineering hydrology. Metu Press, Ankara
Venkatesan V, Balamurugan R, Krishnaveni M (2012) Establishing Water Surface Area-Storage Capacity Relationship of Small Tanks Using SRTM and GPS. Energy Procedia 16:1167-1173
Vialle C, Busset G, Tanfin L, Montrejaud-Vignoles MC, Huau C, Sablayrollesa C (2015) Environmental analysis of a domestic rainwater harvesting system: a case study in France. Resour Conserv Recycl 102:178–184
Vorosmarty CJ, Green P, Salisbury J, Lammers RB (2000) Global water resources: vulnerability from climate change and population growth. Science 289:284–288
Wolfe S, Brooks DB (2003) Water scarcity: an alternative view and its implications for policy and capacity building. Nat Res Forum 27:99–107
Zafeiriou S, Sofios S (2011) Water management and economic growth. A macroeconomic model Journal of Environmental Protection and Ecology 12:1563–1574
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of Interest
None.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Saplioglu, K., Kucukerdem, T.S. & Şenel, F.A. Determining Rainwater Harvesting Storage Capacity with Particle Swarm Optimization. Water Resour Manage 33, 4749–4766 (2019). https://doi.org/10.1007/s11269-019-02389-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11269-019-02389-3