1 Correction to: Tribol Lett (2019) 67: 97 https://doi.org/10.1007/s11249-019-1210-7
In the original version of this paper, there is a typo in the last two sentences of section ‘2.1 In Situ TEM Experimental Measurements’.
The following sentence was published incorrectly as “The mean of the difference between the width of the in-contact and out-of-contact profiles was measured to be 0.3 nm and set as the correction factor. Hence, the corrected contact diameter was calculated as Dtrue = Dmeas – 0.3 nm”.
The correct sentence should read as follows “The mean of the difference between the width of the in-contact and out-of-contact profiles was measured to be 0.7 nm and set as the correction factor. Hence, the corrected contact diameter was calculated as Dtrue = Dmeas – 0.7 nm.”
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Vishnubhotla, S.B., Chen, R., Khanal, S.R. et al. Correction to: Matching Atomistic Simulations and In Situ Experiments to Investigate the Mechanics of Nanoscale Contact. Tribol Lett 68, 15 (2020). https://doi.org/10.1007/s11249-019-1251-y
Published:
DOI: https://doi.org/10.1007/s11249-019-1251-y