Abstract
Friction and wear behaviour of self-mated chemical vapour deposited (CVD) diamond films coating silicon nitride ceramics (Si3N4) were investigated in ambient atmosphere. The tribological tests were conducted in a reciprocal motion ball-on-flat type tribometer under applied normal loads up to 80 N (∼10 GPa). Several characterisation techniques—including scanning electron microscopy (SEM), atomic force microscopy (AFM) and micro-Raman studies—were used in order to assess the quality, stress state and wear resistance of the coatings. In addition, a novel method is presented to estimate the wear coefficient of the diamond coated flat specimens from AFM and optical microscopy (OM) observations of the wear tracks.
Similar content being viewed by others
References
Miyoshi K., (1996) Mater. Sci. Eng. A 209: 38
Jones G.A., (2004) Wear 256: 433
Krauss A.R., Auciello O., Gruen D.M., Jayatissa A., Sumant A., Tucek J., Mancini D., Moldovan N., Erdemir A., Ersoy D., Gardos M., Busmann H., Meyer E., Ding M., (2001) Diam. Relat. Mater. 10: 1952
Met C., Vandenbulcke L., Sainte Catherine M.C., (2003) Wear 255: 1022
Zeiler E., Klaffke D., Hiltner K., Grögler T., Rosiwal S.M., Singer R.F., (1999) Surf. Coat. Tech. 116–119: 599
Hogmark S., Hollman P., Alahelisten A., Hedenqvist P., (1996) Wear 200:225
Uhlmann E., Lachmund U., Brucher M., (2000) Surf. Coat. Tech. 131: 395
Bogli U., Blatter A., Pimenov S.M., Obraztsova E.D., Smolin A.A., Maillat M., Leijala A., Burger J., Hintermann H.E., Loubnin E.N., (1995) Diam. Relat. Mater. 4 : 1009
Field J.E., Pickles C.S.J., (1996) Diam. Relat. Mater. 5: 625
Habig K.-H., (1995) Surf. Coat. Tech. 76–77:540
Hollman P., Bjorkman H., Alahelisten A., Hogmark S., (1998) Surf. Coat. Tech. 105: 169
Kelly P.J., Arnell R.D., Hudson M.D., Wilson A.E.J., Jones G., (2001) Vacuum 61: 61
Gahlin R., Alahelisten A., Jacobson S., (1996) Wear 196: 226
De Barros M.I., Vandenbulcke L., Fontaine J., Farges G., Vayer M., Erre R., (2000) Surf. Coat. Tech. 127: 193
Vandenbulcke L., De Barros M.I., (2001) Surf. Coat. Tech. 146–147: 417
Stals L.M.M., Nesladek M., Quaeyhaegens C., (1997) Surf. Coat. Tech. 91: 230
Belmonte M., Fernandes A.J.S., Costa F.M., Oliveira F.J., Silva R.F., (2003) Diam. Relat. Mater. 12: 733
Miyoshi K., Murakawa M., Watanabe S., Takeuchi S., Miyake S., Wu R.L.C., (1998) Tribol. Lett. 5: 123
Belmonte M., Silva V.A., Fernandes A.J., Costa F., Silva R., (2003) J. Am. Ceram. Soc. 86(5): 749
Warren P., (1995) J. Euro. Ceram. Soc. 15: 385
Mermoux M., Marcus B., Abello L., Rosman N., Lucazeau G., (2003) J. Raman Spectrosc. 34: 505
Miyoshi K., Wu R.L.C., (2001) Measurement 29: 113
Mallika K., Komanduri R., (2001) Thin Solid Films 396: 145
Gardos M.N., (1999) Surf. Coat. Tech. 113: 183
Donato M.G., Faggio G., Marinelli M., Messina G., Milani E., Paoletti A., Santangelo S., Tucciarone A., Rinati G.V., (2001) Eur. Phys. J. B 20: 133
De Barros M.I., Vandenbulcke L., Bléchet J.J., (2001) Wear 249: 68
Ferreira N.G., Abramof E., Leite N.F., Corat E.J., Trava-Airoldi V.J., (2002) J. Appl. Phys. 91(4): 2466
Ager III J.W., Drory M.D., (1993) Phys. Rev. B 48: 2601
M.I. De Barros, Procédés de dépôt de revêtements de diamant sur substrats métallurgiques, caractérisations et propriétés tribologiques (Ph.D. thesis, Université D’Orléans, 2000)
Ager III J.W., (1995) Mater. Res. Soc. Symp. Proc. 383: 143
Gray K.J., Olson J.M., Windischmann H., (1995) Mater. Res. Soc. Symp. Proc. 383:135
Grögler T., Franz A., Klaffke D., Rosiwala S.M., Singer R.F., (1998) Diam. Relat. Mater. 7: 1342
Acknowledgments
This work was supported by the project BIODIAM (POCTI/CTM/45423/2002). C. S. Abreu also acknowledges PRODEP III funds supporting his PhD work, and M. Belmonte the financial support from the “Ramón y Cajal” program (MEC, Spain).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Abreu, C., Oliveira, F., Belmonte, M. et al. CVD diamond coated silicon nitride self-mated systems: tribological behaviour under high loads. Tribol Lett 21, 141–151 (2006). https://doi.org/10.1007/s11249-006-9032-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11249-006-9032-9