Transport in Porous Media

, Volume 117, Issue 2, pp 169–187 | Cite as

Consideration on Data Dispersion for Two-Phase Flow Micromodel Experiments

  • S. MarchandEmail author
  • I. Bondino
  • A. Ktari
  • E. Santanach-Carreras


Transparent man-made porous media, also known as micromodels, are a widely used exploration tool in the field of two-phase flow in porous media (Alireza and Sohrabi in Soc Petrol Eng 166435, 2013; Bondino et al., in International symposium of the society of core analysts held in Napa Valley, California, USA, 2013) to enhance the comprehension of oil recovery mechanisms at pore-scale. Although they have more often been used as qualitative visualization tools to explore the elementary physicochemical features of a given flow mechanism, their utilization as a quantitative tool is interesting especially in industrial context, where they represent an easy and low-cost screening tool for complex recovery mechanisms (low salinity waterflooding, polymer flooding, etc). However, the repeatability of these experiments and thus the possibility to derive quantitative conclusions from them appears not to be investigated in the literature in our field of study. In this work, we explore the dispersion of data such as capillary desaturation curves and secondary waterflood recoveries using micromodels of different sizes and different pore patterns from our laboratory and from an external one. Using datasets with low sampling (low number of repeats of an experiment) and with very large sampling, we document the type of data dispersion, we analyze its reasons and we verify to which extent truly quantitative conclusions can be drawn from these datasets. Our study demonstrates that at low sampling drawing quantitative inferences from our datasets is questionable due to the large uncertainty of the produced data.


Repeatability Pore-scale Sampling 



The authors are grateful to TOTAL S.A. for the financial and technical contribution and to Jean-Philippe Chaulet for his technical assistance during this study. The personnel at the Geoscience Research Centre of TOTAL UK in Aberdeen, Scotland, is also gratefully acknowledged.


  1. AlDousary, S.: Determining pore level mechanisms of alkaline surfactant polymer flooding using a micromodel. Soc. Petrol. Eng., 165572-STU (2012)Google Scholar
  2. Alireza, E., Sohrabi, M.: Visula investigation of oil recovery by low salinity water injection: formation of water micro-dispersions and wettability alteration. Soc. Petrol. Eng. 166435 (2013)Google Scholar
  3. Armstrong, R.T., Berg, S.: Interfacial velocities and capillary pressure gradients during Haines jumps. Phys. Rev. 88, 043010 (2013)CrossRefGoogle Scholar
  4. Armstrong, R.T., Evseev, N., Koroteev, D., Berg, S.: Modeling the velocity field during Haines jumps in porous media. Adv. Water Resour. 77, 57–68 (2015)CrossRefGoogle Scholar
  5. BIPM: Evaluation of measurement data—guide to the expression of uncertainty in measurement (GUM 1995 with minor corrections), vol. 100. JCGM, Montrouge (2008)Google Scholar
  6. Bondino, I., Doorwar, S., Ellouz, R., Hamon, G.: Visual microscopic investigations about the role of ph, salinity and clay on oil adhesion and recovery. International Symposium of the Society of Core Analysts held in Napa Valley, California (2013)Google Scholar
  7. Buchgraber, M., Al-Dossary, M., Ross, C.M., Kovscek, A.R.: Creation of a dual-porosity micromodel for pore-level visualization of multiphase flow. J. Petrol. Sci. Eng. 86–87, 27–38 (2012)CrossRefGoogle Scholar
  8. Buchgraber, M., Clemens, T., Castanier, L.M., Kovscek, A.R.: A microvisual study of the displacement of viscous oil by polymer solutions. Soc. Petrol. Eng. 122400 (2011). doi: 10.1016/j.petrol.2012.03.012
  9. Chatzis, I., Morrow, N.R.: Correlation of capillary number relationship for sandstone. Soc. Petrol. Eng. (1984). doi: 10.2118/10114-PA
  10. Chatzis, I., Morrow, N., Lim, H.: Magnitude and detailed structure of residual oil saturation. Soc. Petrol. Eng. J. (1983). doi: 10.2118/10681-PA
  11. Chesneau, C.: Tables de valeurs. Retrieved 2015 3-November from Université , de Caen Basse-Normandie. (2015)
  12. Cottin, C., Bodiguel, H., Colin, A.: Drainage in two-dimensional porous media: from capillary fingering to viscous flow. Phys. Rev. 82, 046315 (2010)Google Scholar
  13. Cottin, C., Bodiguel, H., Colin, A.: Influence of wetting conditions on drainage in porous media: a microfluidic study. Phys. Rev. 84, 026311 (2011)Google Scholar
  14. Creswell, J.W.: Research Esign: Qualitative, Quantitative and Mixed Methods Approaches, 4th edn. SAGE Publication, Beverley Hills (2014)Google Scholar
  15. Datta, S.S., Dupin, J.-B., Weitz, D.A.: Fluid breakup during simultaneous two-phase flow through a three-dimensional porous medium. AIP Publ. 26, 062004 (2014)Google Scholar
  16. Datta, S.S., Ramakrishnan, T.S., Weitz, D.A.: Mobilization of a trapped non-wetting fluid from a three-dimensional porous medium. AIP Publ. 26, 022002 (2014)Google Scholar
  17. Doorwar, S., Mohanty, K.K.: Extension of the dielectric breakdown model for simulation of viscous fingering at finite viscosity ratios. Phys. Rev. 90, 013028 (2014)Google Scholar
  18. Emadi, A., Sohrabi, M.: Visual investigation of low salinity waterflooding. International Symposium of the Society of Core Analysts held in Aberdeen, Scotland (2012)Google Scholar
  19. Iglauer, S., Ferno, M., Shearing, P., Blunt, M.: Comparison of residual oil cluster size distribution, morphology and saturation in oil-wet and water-wet sandstone. Elsevier, London. doi: 10.1016/j.jcis.2012.02.025 (2012)
  20. Jadhunandan, P., Morrow, N.: Effect of wettability on waterflood recovery for crude-oil/brine/rock systems. SPE Reserv. Eng. (1995). doi: 10.2118/22597-PA
  21. Karadimitriou, N.K., Hassanizadeh, S.M.: A review of micrmodels and their use in two-phase flow studies. Soil Sci. Soc. Am. 0021-0041 (2011)Google Scholar
  22. Karadimitriou, N., Hassanizadeh, S.: A review of micromodels and their use in two-phase flow studies. Soil Sci. Soc. Am. doi: 10.2136/vzj2011.0072 (2012)
  23. Larson, R., Farber, B.: Elementary Statistics: Picturing the World, 5th edn. Pearson Education Inc, Boston (2012)Google Scholar
  24. Levaché, B.: Dynamique d’imbibition en milieu confiné (Ph.D. thesis). Paris: Université Pierre et Marie Curie (UPMC) (2014)Google Scholar
  25. Porter, M.L., Jiménez-Martinez, J., Carey, J.W., Viswanathan, H., Mody, F., Sheng, J.: Fundamental investigation of gas injection in microfluidic shale fracture networks at geologic conditions. Am. Rock Mech. Assoc. 15-0367 (2015).
  26. Rodriguez de Castro, A., Shokri, N., Karadimitriou, N., Oostrom, M., Joekar-Niasar, V.: Experimental study on nonmonotonicity of capillary desaturation curves in a 2-D pore network. Water Resour. Res. 51, 8517–8528 (2015)CrossRefGoogle Scholar
  27. Schneider, M.: Wettability patterning in microfluidic systems and applications on the petroleum industry. Ph.D. of Pierre and Marie Curie University (2011)Google Scholar
  28. Sedaghat, M.H., Ghazanfari, M.H., Parvazdavani, M., Morshedi, S.: Experimental investigation of microscopic/macroscopic effeciency of polymer flooding in fractured heavy oil five-spot systems. J. Energy Resour. Technol. 135, 032901-1 (2013)Google Scholar
  29. Sohrabi, M., Emadi, A., Farzaneh, S. A., and Ireland, S.: A thorough investigation of mechanisms of enhanced oil recovery by carbonated water injection. Soc. Petrol. Eng. 175159-MS (2015)Google Scholar
  30. Song, W., Kovscek, A.R.: Functionalization of micrmodels with kaolinite for investigation of low salinity oil-recovery processes. R. Soc. Chem. 15, 3314 (2015)Google Scholar
  31. Taylor, J.R.: Incertitudes et analyse des erreurs dans les mesures physiques—Avec exercices corrigés. DUNOD—Collection Masson Sciences (2000)Google Scholar

Copyright information

© Springer Science+Business Media Dordrecht 2017

Authors and Affiliations

  • S. Marchand
    • 1
    • 2
    Email author
  • I. Bondino
    • 1
  • A. Ktari
    • 1
    • 3
  • E. Santanach-Carreras
    • 4
    • 5
  1. 1.Total S.A., CSTJFPauFrance
  2. 2.ESPCI ParisParisFrance
  3. 3.Technica Engineering GMBHMunichGermany
  4. 4.Total S.A., Pôle d’Etudes et Recherche de LacqLacqFrance
  5. 5.Laboratoire Physico-Chimie des Interfaces Complexes, Total S.A. - ESPCILacqFrance

Personalised recommendations