The paper considers the possibility of determining stresses and strains in elastoplastic deformed body from hardness spreading parameters.
Similar content being viewed by others
References
V. K. Grigorovich, Hardness and Microhardness of Metals [in Russian], Nauka, Moscow (1976).
A. G. Kolmakov, V. F. Terent’ev, and M. B. Bakirov, Hardness Measuring Methods. Handbook [in Russian], Intermet Inzhiniring, Moscow (2000).
G. D. Del’, Determination of Stresses in the Plastic Domain from Hardness Distribution [in Russian], Mashinostroenie, Moscow (1971).
A. A. Lebedev, N. R. Muzyka, and N. L. Volchek, “Determination of damage accumulated in structural materials by the parameters of scatter of their hardness characteristics,” Strength Mater., 34, No. 4, 317–321 (2002).
A. A. Lebedev, N. R. Muzyka, N. L. Volchek, and S. A. Nedoseka, “Monitoring of current state of pipe metal in active gas pipelines. experimental method and results,” Strength Mater., 35, No. 2, 122–127 (2003).
M. P. Markovets, Determination of the Mechanical Properties of Materials from Hardness [in Russian], Mashinostroenie, Moscow (1979), pp. 40–43.
V. M. Matyunin, Methods and Means of the Specimen-Free Rapid Estimation of the Mechanical Properties of Structural Materials [in Russian], MÉI, Moscow (2001).
A. P. Gopkalo, N. R. Muzyka, A. V. Rutkovskii, and V. P. Shvets, “Effect of PVD coatings on the strain and low-cycle fatigue resistance of stainless steel and titanium alloys,” Strength Mater., 43, No. 6, 604–614 (2011).
A. A. Lebedev, N. R. Muzyka, and N. L. Volchek, “A new method for the assessment of material degradation during operation,” Zalizn. Transport Ukrayiny, No. 5, 30–33 (2003).
A. A. Lebedev, I. V. Makovetskii, N. R. Muzyka, et al., “Assessment of damage level in materials by the scatter of elastic characteristics and static strength,” Strength Mater., 38, No. 2, 109–116 (2006).
M. A. Starikov and Yu. A. Nikiforov, “Residual life assessment for the metallic structures of hoisting machines,” Strength Mater., 44, No. 1, 108–113 (2012).
A. A. Baron, “Assessment of the cold brittleness of steel from low–temperature hardness,” Zavod. Lab., No. 1, 65–68 (1990).
M. Kh. Shorshorov, S. I. Bulychev, and V. P. Alekhin, “Work of plastic and elastic deformation in indentation,” Dokl. AN SSSR, 259, No. 4, 839–842 (1982).
É. G. Aslanyan, “Instrumentation for hardness measurements,” Izmerit. Tekhnika, No. 1, 45–50 (2005).
M. I. Akchurin and V. R. Regel’, “A study of the peculiarities of strained structure, which is formed by the action of concentrated load on crystal. Review,” Zavod. Lab., No. 5, 17–28 (1999).
A. A. Komarovskii, “Physical nature of hardness,” Kontr. Diagn., No. 1, 41–43 (2003).
RD ÉO 0027-94. Determination of the Mechanical Characteristics of the Metal of Atomic Power Equipment by Specimen-Free Methods from Hardness Characteristics. Manual [in Russian], Rosénergoatom, Moscow (1994).
M-11-03-98. Procedure for the Determination of the Mechanical Properties of the Metal of Pipes and Pipelines Using a Portable Hardness Meter [in Russian], Resursdiagnostika Information Center, Moscow (1998).
M. S. Drozd, Nondestructive Determination of the Mechanical Properties of Metal [in Russian], Metallurgiya, Moscow (1972).
RD 153-34.0-17.464-00. Methodical Instructions for Metal Checking and the Prolongation of the Service Life of Pipelines of Categories II, III, and IV [in Russian], Valid since July 1, 2001.
DSTU 4046-2001. Basic Equipment of Oil-Refining, Petrochemical and Chemical Industries. Technical Diagnosis [in Ukrainian], Derzhstandart Ukrayiny, Kyiv (2001), pp. 9–14.
I. N. Bogachev, A. A. Vainshtein, and S. D. Volkov, An Introduction to Statistical Physical Metallurgy [in Russian], Metallurgiya, Moscow (1972), p. 24.
S. I. Bulychev and V. P. Alyokhin, “Determination of yield strength from the real contact area of spherical indenter in the case of nano-, micro-, and macroindentation,” Deform. Razrush. Mater., No. 1, 30–36 (2007).
S. A. Fedosov and L. Peshek, Determination of the Mechanical Properties of Materials by Microindentation (Modern Foreign Procedures. Review) [in Russian], MGU, Moscow (2004).
A. O. Lebedev, M. R. Muzyka, and N. L. Volchek, A Method of Assessment of Material Degradation Due to Damage Accumulation during Operating Time. “LM-Hardness Method” [in Ukrainian], Patent of Ukraine No. 52107A. Valid since January 15, 2003. Bul. No. 1.
N. V. Smirnov and I. V. Dunin- Barkovskii, A Course of Probability Theory and Mathematical Statistics (for Technical Applications) [in Russian], Nauka, Moscow (1969).
GOST 1497-84. Metals. Tensile Test Methods [in Russian], Introduced on January 1, 1986.
N. R. Muzyka, I. V. Makovetskii, and V. P. Shvets, “Evaluation of the influence of the level of stresses in the material on its in-service damageability,” Strength Mater., 40, No. 4, 469–473 (2008).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 4, pp. 84 – 91, July – August, 2014.
Rights and permissions
About this article
Cite this article
Muzyka, N.R., Shvets, V.P. Determination of Stresses and Strains in Elastoplastic Deformed Body from Hardness Characteristics. Strength Mater 46, 512–517 (2014). https://doi.org/10.1007/s11223-014-9576-0
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-014-9576-0