The paper presents the results of the computational experiments to determine the regularities in the variation of the static stress state characteristics of blades as a function of the inclination angle value of the shroud contact surfaces relative to the plane of rotor wheel rotation with a consideration of the action of centrifugal gravity forces and high temperatures of the gas flow.
Similar content being viewed by others
References
V. M. Ìårkulov and F. D. Il’yushchenko, “On the choice of a method of shrouding GTE turbine rotor blades,” Vestn. Dvigatelestr., No. 2, 114–117 (2005).
R. P. Pridorozhnyi, V. M. Ìårkulov, and A. P. Zinkovskii, “Analysis of the stress-strain state of shrouded AGTE turbine rotor blades with a consideration of the influence of temperature and operating life,” Aviats.-Kosm. Tekhn. Tekhnol., No. 9 (66), 78–82 (2009).
À. V. Levin, K. N. Borishanskii, and E. D. Kînson, Strength and Vibration of Steam Turbine Blades and Disks [in Russian], Mashinostroenie, Leningrad (1981).
V. P. Ivanov, Vibration of Turbomachine Rotor Wheels [in Russian], Mashinostroenie, Ìoscow (1983).
Yu. S. Vorob’ev, Vibration of Turbomachinery Blading [in Russian], Naukova Dumka, Kiev (1988).
V. V. Matveev, Vibration Damping of Deformable Solids [in Russian], Naukova Dumka, Kiev (1985).
J. Fan, L. Han, R. Wang, et al., “Research on structural design and optimization of the turbine blade shroud,” in: Proc. of ASME Gas Turbine India Conference, New York (2012), pp. 657–663.
V. M. Ìårkulov and Yu. V. Yakushev, “Influence of the process parameters of producing turbine rotor wheels of the contact pressure force between shrouds with smooth edges,” Vestn. Dvigatelestr., No. 3, 154–157 (2008).
Yu. S. Vorob’ev, K. Yu. D’yakonenko, V. N. Romanenko, and M. A. Chugai, “Analysis of the stress localization under vibration of turbomachinery blading,” in: Proc. of the Central Boiler-Turbine Institute: Strength of Materials and Service Life of Power Equipment Elements [in Russian], Issue No. 296 (2009), pp. 282–306.
V. M. Ìårkulov and F. D. Il’yushchenko, “Development of shrouded turbine rotor wheels with consideration of the requirements of reliability and manufacturability,” Aviats.-Kosm. Tekhn. Tekhnol., No. 9 (35), 86–89 (2006).
A. P. Zinkovskii and Ya. D. Kruglii, “Effect of identity violations of contact interaction between shrouds on the static and dynamic stress state characteristics of blade rings,” Strength Mater., 44, No. 2, 144–156 (2012).
À. V. Sheremet’ev and À. V. Petrov, “Selection of the required finite element mesh parameters in the strength analysis of aircraft engine blades,” Aviats.-Kosm. Tekhn. Tekhnol., No. 7 (15), 114–118 (2004).
R. P. Pridorozhnyi, À. V. Sheremet’ev, A. P. Zinkovskii, et al., “Assessment of the stress state of lock joints of turbine rotor blades with a consideration of possible deviations in their size,” Aviats.-Kosm. Tekhn. Tekhnol., No. 8 (44), 81–85 (2007).
V. M. Ìårkulov, S. S. Tripol’skii, and Yu. V. Yakushev, “On the selection of the shroud coupling parameters for turbine rotor blades with straight shrouds,” Aviats.-Kosm. Tekhn. Tekhnol., No. 9 (45), 48–51 (2008).
V. M. Ìårkulov, Yu. V. Yakushev, N. N. Fedorchenko, and A. P. Zinkovskii, “On the influence of the shrouding parameters on the reliability and life of turbine rotor blades,” Aviats.-Kosm. Tekhn. Tekhnol., No. 10 (67), 167–171 (2009).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 4, pp. 62 – 72, July – August, 2014.
Rights and permissions
About this article
Cite this article
Savchenko, K.V., Zinkovskii, A.P., Tokar’, I.G. et al. Influence of the Orientation of Shroud Contact Surfaces on the Static Stress State of Turbine Rotor Blades. Strength Mater 46, 493–502 (2014). https://doi.org/10.1007/s11223-014-9574-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-014-9574-2