The procedure and results of studies on the durability of the cantilever beam metal over the stress concentrator area in pulsed cyclic bending are presented. Comparison of experimental and numerical simulation data resulted in establishing the relation between the durability and cyclic inelastic strain amplitude. The effect of strain hardening and plastic strains on durability was elucidated.
Similar content being viewed by others
References
N. A. Makhutov and M. M. Gadenin, “Substantiation of strength, lifetime, reliability, and safety of hydroelectric plants,” in: Enhancement of Reliability and Operating Efficiency of Power Plants and Energy Systems [in Russian], Proc. All-Russian Practical-Scientific Conf. (June 1–3, 2010, Moscow), MÉI, Moscow (2010), pp. 201–205.
A. S. Kurkin and G. P. Batov, “Plastic limit – universal local criterion fracture characteristic for lifetime assessment of welded structures,” Zavod. Lab., 76, No. 6, 45–54 (2010).
PNAÉ G-7-002-86. Norms of Strength Calculations for the Equipment and Pipelines of Atomic Power Plants [in Russian], Énergoatomizdat, Moscow (1989).
Yu. G. Dragunov, A. S. Zubchenko, O. Yu. Petrova, and I. L. Kharina, “Effect of high-parameter water on the tendency of 10GN2MFA steel to decelerated deformation corrosion cracking,” Mashinostr. Inzh. Obraz., No. 4, 35–41 (2007).
N. G. Chausov, A. A. Lebedev, L. V. Zaitseva, and A. V. Getmanchuk, “Effect of the form of stressed state on the kinetics of damage accumulation and crack resistance of body steel 15Kh2MFA under different conditions. Communication 1. Stagewise process of steel KP60 failure,” Strength Mater., 25, No. 3, 157–162 (1993).
G. V. Stepanov, Elastoplastic Deformation and Fracture of Materials under Pulse Loading [in Russian], Naukova Dumka, Kiev (1991).
ANSYS HTML. Online Documentation, SAS IP Inc. (2005).
V. T. Troshchenko (Ed.), Deformation and Fracture Resistance of Materials. Handbook [in Russian], Part 1, Naukova Dumka, Kiev (1993).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 4, pp. 43 – 49, July – August, 2014.
Rights and permissions
About this article
Cite this article
Stepanov, G.V., Mameev, I.A. Durability of a Stress Concentrator-Containing Cantilever Beam Under Cyclic Loading in Bending. Strength Mater 46, 477–482 (2014). https://doi.org/10.1007/s11223-014-9572-4
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-014-9572-4