The results of studies on the origination and growth of fatigue cracks in the stiffening ribs of VL60 electric locomotive truck frames were presented. It was caused by the deformation of truck frames in the horizontal plane and resonance vibrations of stiffening ribs. The new design of the stiffening rib was proposed, which provided its performance.
Similar content being viewed by others
References
U. Winkler, “Europe’s cleanest disel locomotive,” Eur. Railway Reviev, No. 2, 23–25 (2005).
A. V. Tret’yakov, Management of Individual Lifetime of Cars in Operation [in Russian], OM-Press, St. Petersburg (2004).
A. M. Bondarev, V. L. Gorobets, I. M. Grushchak, et al., “Inftuence of operating loads on the stresses in carrying structure elements of a VL60 electric locomotive,” Zalizn. Transport Ukrainy, No. 4, 21–25 (2002).
A. I. Kovalev, Barkhausen Effect-Based Instruments for Estimation of the State of a Surface Layer of Ferromagnetic Materials [in Russian], Inform Letter No. 137, Institute of Problems of Strength of the Academy of Sciences of UkrSSR, Kiev (1987).
V. A. Degtyarev, “Equipment of type DSO for fatigue testing in repeated impact and harmonic loading with various stress ratios,” Strength Mater., 14, No. 10, 1413–1416 (1982).
TsT-251. Instuctions for Welding Operations in Repair of Diesel, Electric Locomotives, and Running Motor–Coach Stock [in Russian], Transport, Moscow (1975).
V. A. Leonets, A. A. Leonets, O. D. Tokarev, et al., “System of dynamic-strength trials for carrying structures of rolling stock and track structure at higher speeds,” Zhelezn. Dorogi Mira, No. 9, 73–76 (2002).
E. G. Buglov, É. A. Kolikov, and M. Ya. Filatov, “Investigation of the fatigue of steel in the presence of biharmonic loading,” Strength Mater., 2, No. 1, 43–46 (1970).
V. T. Troshchenko and L. A. Sosnovskii, Fatigue Strength of Materials and Alloys. Handbook [in Russian], Part 1, Naukova Dumka, Kiev (1987).
N. A. Averin, G. I. Zaikin, A. A. Bukhantsev, et al., Norms for Calculation and Estimation of the Strength of Carring Elements, Dynamic Properties, and the Effect of a 1520-mm Gauge Line on the Track of Locomotive Underframe of Railways (Ministry of Communications, Russian Federation) [in Russian], VNIIZhT, Moscow (1998).
M. Ya. Gal’perin, V. P. Kogaev, and B. A. Meisner, “Fatigue strength of welded beams of locomotive truck frames,” in: Proc. TsNII MPS (1977), Issue 574, pp. 50–71.
L. J. Segerlind, Applied Finite Element Analysis, John Wiley & Sons Inc. (1984).
T. V. Chemodanova, Pro/ENGINEER: Component. Assembly. Drawing [in Russian], BKhV-Petersburg, St. Petersburg (2003).
A. G. Yanishevskaya and I. N. Pergun, Use of ANSYS Software in the Calculations of Thermal Processes in Mechanical Engineering [in Russian], Omsk State Technical University, Omsk (2001).
G. S. Pisarenko, V. A. Agarev, A. L. Kvitka, et al., Strength of Materials [in Russian], Tekhnika, Kiev (1967).
Z. M. Dubrovskii and L. M. Lorman, VL60k and VL60p/k Electric Locomotives. Service Instructions [in Russian], Transport, Moscow (1993).
V. A. Tarasov, A. G. Grigor’yants, V. D. Baskakov, et al., “Procedure for shrinkage force calculations in welding of thin-wall structures,” Svaroch. Proizvod., No. 6, 10–13 (2000).
A. N. Reznikov and L. A. Reznikov, Thermal Processes in Engineering Systems [in Russian], Mashinostroenie, Moscow (1990).
M. D. Narguzhan, G. T. Danenova, and T. G. Shigaev, “Calculation of residual stresses and strains on arc welding with modulated current,” in: A. S. Shadskii (Ed.), Proc. III Conf. CAD-FEM GmbH Software Users (April 23–24, 2003, Moscow), Poligon-Press, Moscow (2003).
L. S. Okhotin, R. P. Borovikova, and A. S. Pushkarskii, Heat Conduction of Solids. Reference Book [in Russian], Énergoizdat, Moscow (1984).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 5, pp. 104 – 116, September – October, 2011.
Rights and permissions
About this article
Cite this article
Leonets, V.A., Dmytrenko, O.M., Chaus, L.M. et al. Life extension of the stiffening ribs of VL60 electric locomotive truck frames. Strength Mater 43, 559–568 (2011). https://doi.org/10.1007/s11223-011-9328-3
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-011-9328-3