We present results of a numerical simulation of the effect of cyclic creep (ratcheting) with different programs of stress-controlled uniaxial asymmetrical loading of two metallic materials with different cyclic properties. An improvement of the kinematic hardening rule in the cyclic plasticity model on the basis of defining equations of the endochronic theory of plasticity is proposed. It has been shown that the proposed model allows one to describe with satisfactory accuracy the kinetics of the stress-strain state of specimens under low-cycle asymmetrical loading on the basis of the minimum number of basic experiments.
Similar content being viewed by others
References
L. F. Coffin, “The stability of metals under cyclic plastic strain,” Trans. ASME, Ser. D, 82, No. 3, 671–682 (1960).
R. M. Shneiderovich, Strength under Static and Repeated Static Loading [in Russian], Mashinostroenie, Moscow (1968).
V. A. Strizhalo, Cyclic Strength and Creep of Metals under Low-Cycle Loading at Low and High Temperatures [in Russian], Naukova Dumka, Kiev (1978).
S. V. Serensen, R. M. Shneiderovich, N. A. Makhutov, et al., Strain Fields under Low-Cycle Loading [in Russian], Nauka, Moscow (1979).
M. B. Ruggles and E. Krempl, “The influence of the test temperature on the ratcheting behavior of type 304 stainless steel,” ASME J. Eng. Mater. Technol., 111, 378–383 (1989).
T. Hassan and S. Kyriakides, “Ratcheting in cyclic plasticity. Pt. I: Uniaxial behavior,” Int. J. Plasticity, 8, 91–116 (1992).
D. L. McDowell, “Stress state dependence of cyclic ratcheting behavior of two rail steels,” Int. J. Plasticity, 11, 397–421 (1995).
J. L. Chaboche, “On some modifications of kinematic hardening to improve the description of ratcheting effects,” Int. J. Plasticity, 7, 661–678 (1991).
N. Ohno and J. D. Wang, “Kinematic hardening rules for simulation of ratcheting behavior,” Eur. J. Mech. A/Solids, 13, 519–531 (1994).
E. Tanaka, “A non-proportionality parameter and a viscoplastic constitutive model taking into account amplitude dependences and memory effects of isotropic hardening,” Eur. J. Mech. A/Solids, 13, 155–173 (1994).
M. V. Borodii, “Model of plasticity aimed at the prediction of cyclic creep,” Strength Mater., 30, No. 6, 611–615 (1998).
T. Hassan, E. Corona, and S. Kyriakides, “Ratcheting in cyclic plasticity. Pt. II: Multiaxial behavior,” Int. J. Plasticity, 8, 117–146 (1992).
E. Corona, T. Hassan, and S. Kyriakides, “On the performance of kinematic hardening rules in predicting a class of biaxial ratcheting histories,” Int. J. Plasticity, 12, 117–145 (1996).
V. Aubin and S. Degallaix, “Ratcheting modeling of a duplex stainless steel model based on yield surface distortion,” in: Proc. 7th Int. on Conf. Biaxial/ Multiaxial Fatigue and Fracture (Berlin, Germany, 28 June – 1 July), Berlin (2004), pp. 285–290.
M. V. Borodii, “Modeling of the asymmetric low-cycle loading in the space of stresses,” Strength Mater., 30, No. 5, 472–480 (1998).
Author information
Authors and Affiliations
Additional information
Translated from Problemy Prochnosti, No. 6, pp. 113–121, November–December, 2010.
Rights and permissions
About this article
Cite this article
Borodii, M.V., Adamchuk, M.P. Numerical simulation cyclic creep effect according to uniaxial loading programs. Strength Mater 42, 711–716 (2010). https://doi.org/10.1007/s11223-010-9258-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11223-010-9258-5