Abstract
The stress-strain state and the failure onset time are calculated by Rabotnov's kinetic theory of creep for a thick-walled nonuniformly heated pipe loaded by internal pressure. We analyze the influence of the temperature difference along the pipe radius on the stress intensity distribution and damageability parameter of material in the pipe cross section at various instants of time up to the rupture onset. Based on the comparative analysis, we proved incompatibility of the results obtained by the above-mentioned theory with those calculated by the similar theory of creep in the Kachanov's statement.
Similar content being viewed by others
REFERENCES
Yu. N. Rabotnov, Creep of Structural Elements [in Russian], Nauka, Moscow (1966).
A. F. Nikitenko, Creep and Creep-Rupture Strength of Metallic Materials [in Russian], Novosibirsk State University of Architecture and Building, Novosibirsk (1997).
S. A. Shesterikov (Ed.), Mechanisms of Creep and Creep-rupture Strength. Handbook [in Russian], Mashinostroenie, Moscow (1983).
Yu. N. Rabotnov and S. T. Mileiko, Short-Term Creep [in Russian], Nauka, Moscow (1970).
O. V. Sosnin, B. V. Gorev, and A. F. Nikitenko, Energy-Based Variant of the Theory of Creep [in Russian], Lavrent'ev Institute of Hydrodynamics of the Siberian Branch of the Russian Academy of Sciences, Novosibirsk (1986).
L. M. Kachanov, Theory of Creep [in Russian], Fizmatgiz, Moscow (1960).
A. F. Nikitenko, “Calculation of stress-strain state and time to fracture in nonuniformly heated thick-walled pipes in creep of pipe material,” Izv. Vuzov, Stroitel'stvo, No. 11, 24–29 (2003).
Yu. N. Rabotnov, “The effect of stress concentration on the creep-rupture strength,” Inzh. Zhurn., Mekh. Tverd. Tela, No. 3, 36–41 (1967).
Author information
Authors and Affiliations
Additional information
__________
Translated from Problemy Prochnosti, No. 5, pp. 30 – 44, September – October, 2005.
Rights and permissions
About this article
Cite this article
Nikitenko, A.F., Lyubashevskaya, I.V. Kinetic Theory of Creep and Creep-Rupture Strength Analysis of Structural Components. Part 1. Stress-Strain State in Nonuniformly Heated Thick-Walled Pipes. Strength Mater 37, 460–470 (2005). https://doi.org/10.1007/s11223-005-0056-4
Received:
Issue Date:
DOI: https://doi.org/10.1007/s11223-005-0056-4