The possibility of manufacturing a thermal control coating has been studied, and the method of its deposition from PD-12 dielectric paste using a Voltera V-One printer has been considered. The morphology, surface roughness, phase structure, diffusion reflection spectra in the range of 200–2500 nm, integral sunlight absorbance, and IR spectra in the range of 400–4000 cm–1 of the coating are investigated. It is established that the proposed method of paste deposition using the printer with its subsequent heating and burning into a substrate allows manufacturing of thermal control dielectric coatings with the reflectance close to that of the well-known coatings of the optical solar absorber class. The results obtained can be used in other fields of science and technology.
Similar content being viewed by others
References
C. H. Rao, K. Avinash, B. K. S. V. L. Varaprasad, and S. Goel, J. Electron. Mater., 51, 2747 (2022).
H. J. Kwon, S. Chung, J. Jang, and C. P. Grigoropoulos, Nanotechnology, 27, 405301 (2016).
G. A. Benatto, B. Roth, M. Corazza, et. al., Nanoscale, 8, 318 (2016).
Y. Yoshioka, and G. E. Jabbour, Synth. Met., 156, 779 (2006).
M. M. Mikhailov, A. N. Lapin, S. A. Yuryev, et al., Mater. Chem. Phys., 310, 128472 (2023).
V. P Svechkin., A. A. Saveliev, S. P. Sokolova, and O. V. Borozdina, Space Eng. Technol., 2, 99 (2017).
ASTM E903, 12 Standard Test Method for Solar Absorbance, Reflectance, and Transmittance of Materials Using Integrating Spheres (2012).
E. A. Kotomin, A. Stashans, L. N. Kantorovich, et al., Phys. Rev. B, 51, No. 14, 8770 (1995).
H. Çabuk, Y. Yılmaz, and E. Yıldız, Acta Chim. Slov., 66, No. 2, 385 (2019).
J. Dayong, X. Wang, S. Liu, and H. Guo, BioMed Res. Int., 2011, 293161 (2011).
R. M. John and A. Jonathan P.D., J. Phys. Chem., 109, 9028 (2005).
E.T. Salim, R. A. Ismail, M. A. Fakhry, and Y. Yusof, Int. J. Nanoelectron. Mater., 9, 111 (2016).
H. Bu, D. Liu, P. Yuan, et al., Appl. Clay Sci., 180, 105190 (2019).
E. G. Kononova, M. N. Rodnikova, I. A. Solonina, and D. A. Sirotkin, Russ. J. Phys. Chem., 92, No. 7, 1308 (2018).
E. Pullicino, W. Zou, M. Gresil, and C. Soutis, Appl. Compos. Mater., 24, No. 2, 301 (2017).
T. Chu, N. T. Nguyen, T. L. Vu, et al., Materials, 12, No. 3, 450 (2019).
H. S. Azeez and M. R. Mohammad, Al-Nahrain J. Sci., 20, No. 2, 71 (2017).
D. Durgalakshmi, R. R. Ajay, K. Syed, et al., J. Inorg. Organomet. Polym. Mat., 29, No 4, 1390 (2019).
A. Elhefnawy, A. Elmaihy, and A. Elweteedy, J. Therm. Anal. Calorim., 147, 13633 (2022).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Mikhailov, M.M., Lapin, A.N., Yuryev, S.A. et al. Optical Properties of the Dielectric Coating Manufactured by an Additive Method. Russ Phys J 67, 87–93 (2024). https://doi.org/10.1007/s11182-024-03092-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-024-03092-6