The paper studies physical and mechanical properties of multicomponent (Zr+TiBSiNi)N coating synthesized by vacuum-arc deposition using the traditional plasma-assisted gas source “PINK” and new beam-plasma formation (BPF) system. It is shown that the coating obtained by using the BPF system, has better properties that the coating obtained by using the traditional plasma-assisted gas source. In the first case, the coating hardness is 47.8 GPA and in the second case, it is 40.9 GPa. The X-ray diffraction analysis shows that along with ZrN and TiN phases, the BPF-synthesized coating consists of the superhard and heat-resistant TiB2 phase. The X-ray diffraction analysis of the phase composition conducted for the in situ synchrotron radiation beam, shows that notable phase transformations start at temperatures higher than 750°C.
Similar content being viewed by others
References
A. A. Vereshchaka, Vestnik Brianskogo gosudarstvennogo tekhnicheskogo universiteta, 4, No. 48, 25 (2015); https://doi.org/10.12737/17077.
T. M. Cholakova, L. P. Kolaklieva, Hr. P. Bahchedjiev, R. D. Kakanakov, B. Ranguelov, and N. T. Hristeva, J. Phys.: Conf. Ser., 1492, 012036 (2020); https://doi.org/10.1088/1742-6596/1492/1/012036.
A. A. Ashmarin, S. Ya. Betsofen, L. M. Petrov, and M. A. Lebedev, IOP Conf. Ser.: Mater. Sci. Eng., 889, 012019 (2020); https://doi.org/10.1088/1757-899X/889/1/012019.
C. Ziebert and S. Ulrich, J. Vac. Sci. Technol. A, 24, 554 (2006); https://doi.org/10.1116/1.2194031.
T. A. Kuznetsova, V. A. Lapitskaya, S. A. Chizhik, B. Warcholinski, A. Gilewicz, and A. S. Kuprin, IOP Conf. Ser.: Mater. Sci. Eng., 443, 012017 (2018); https://doi.org/10.1088/1757-899X/443/1/012017
M. Yin, W. Liang, Q. Miao, and H. Yu, Ceram. Int., 47, 34085 (2021); https://doi.org/10.1016/j.ceramint.2021.08.317.
J. Musil, P. Zeman, H. Hrubý, and P. H. Mayrhofer, Surf. Coat. Technol., 120–121, 183 (1999); https://doi.org/10.1016/S0257-8972(99)00482-X.
A. Vorontsov, A. Filippov, N. Shamarin, E. Moskvichev, O. Novitskaya, E. Knyazhev, Y. Denisova, A. Leonov, V. Denisov, and S. Tarasov, Metals, 12, 1746 (2022); https://doi.org/10.3390/met12101746.
O. V. Sobol, A. A. Andreev, V. F. Gorban, A. A. Meilekhov, A. A. Postelnik, and V. A. Stolbovoi, J. Nano-Electron. Phys., 8, 01042 (2016); https://doi.org/10.21272/jnep.8(1).01042.
F. Khatkhatay, J. Jian, L. Jiao, Q. Su, J. Gan, J. I. Cole, and H. Wang, J. Alloys Compd., 580, 448 (2013); https://doi.org/10.1016/j.jallcom.2013.06.108.
S. Bhattacharya, L. Jamison, D. N. Seidman, W. Mohamed, Y. Bei, M. J. Pellin, and A. M. Yacout, J. Nucl. Mater., 526, 151770 (2019); https://doi.org/10.1016/j.jnucmat.2019.151770.
E. L. Vardanyan, K. N. Ramazanov, R. Sh. Nagimov, and A. Yu. Nazarov, Surf. Coat. Technol., 389, 125657 (2020); https://doi.org/10.1016/j.surfcoat.2020.125657.
V. M. Beresnev, V. V. Grudnitskii, U. S. Nemchenko, M. V. Kaverin, A. M. Makhmud, G. V. Kirik, M. Y. Smolyakova, D. A. Kolesnikov, and F. F. Komarov, J. Frict. Wear, 33, 173 (2012); https://doi.org/10.3103/S1068366612030026.
V. V. Denisov, Y. A. Denisova, E. L. Vardanyan, E. V. Ostroverkhov, A. A. Leonov, and M. V. Savchuk, Russ. Phys. J., 64, 150 (2021); https://doi.org/10.1007/s11182-021-02310-9.
A. S. Grenadyorov, K. V. Oskomov, A. A. Solovyev, N. M. Ivanova, and V. S. Sypchenko, Russ. Phys. J., 62, 1206 (2019). https://doi.org/10.1007/s11182-019-01835-4.
A. I. Menshakov, D. R. Emlin, N. V. Gavrilov, Yu. S. Surkov, and S. O. Cholakh, Izv. Vyssh. Uchebn. Zaved., Fiz., 61, 172 (2018).
A. A. Leonov, Y. A. Denisova, V. V. Denisov, M. S. Syrtanov, A. N. Shmakov, V. M. Savostikov, and A. D. Teresov, Coatings, 13, 351 (2023); https://doi.org/10.3390/coatings13020351.
V. M. Savostikov, A. A. Leonov, V. V. Denisov, Yu. A. Denisova, A. B. Skosyrsky, and I. A. Shulepov, J. Surf. Investig., 17, 686 (2023); https://doi.org/10.1134/S102745102303031X.
F. Movassagh-Alanagh, A. Abdollah-Zadeh, M. A. Zolbin, N. Nemati, and R. Aghababaei, Tribol. Int., 179, 108137 (2013); https://doi.org/10.1016/j.triboint.2022.108137.
L. Yu, H. Luo, J. Bian, H. Ju, and J. Xu, Coatings, 7, 137 (2017); https://doi.org/10.3390/coatings7090137.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Savostikov, V.M., Leonov, A.A., Denisov, V.V. et al. Physical and Mechanical Properties of Multicomponent (Zr+TiBSiNi)N Coating Fabricated by Plasma-Assisted Vacuum-Arc Deposition. Russ Phys J 66, 1173–1179 (2024). https://doi.org/10.1007/s11182-023-03059-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-023-03059-z