The structure and mechanical properties of the sintered Al–7Fe–38Sn composite subjected to plastic pressure treatment have been studied. It has been established that the double pressing of samples with a change in the compression axis at 250–350°C contributes to an increase in their strength and ductility. The improvement of the mechanical properties is due to dispersion of tin interlayers in the matrix and refinement of hard iron aluminides concluded in agglomerates.
Similar content being viewed by others
References
M. Q. Zeng, R. Z. Hu, K. Q. Song, et al., Tribol. Lett., 67, 84 (2019): https://doi.org/10.1007/s11249-019-1195-2.
V. Shyrokov and O. Khlopyk, Mater. Sci., 46, 371–375 (2010); https://doi.org/10.1007/s11003-010-9299-8.
D. M. Goudar, V. C. Srivastava, G. B. Rudrakshi, et al., Trans. Indian Inst. Met., 68, 3–7 (2015); https://doi.org/10.1007/s12666-015-0573-1.
I. E. Kalashnikov, L. K. Bolotova, L. I. Kobeleva, et al., Inorg. Mater. Appl. Res., 12, 750–754 (2021); https://doi.org/10.1134/S2075113321030151.
D. S. Salita and V. V. Polyakov, Phys. Mesomech., 23, 593–600 (2020); https://doi.org/10.1134/S1029959920060156.
O. O. Stolyarova, T. I. Muravyeva, D. L. Zagorskiy, et al., J. Surf. Investig., 11, 832–839 (2017); https://doi.org/10.1134/S1027451017040292.
M. R. Tripathy, B. V. Manoj Kumar, B. Basu, et al., Mater. Sci. Technol., 23 (1), 15–22 (2007); https://doi.org/10.1179/174328407X154392.
N. A. Belov, T. K. Akopyan, I. S. Gershman, et al., J. Alloy. Compd., 695, 2730–2739 (2017); https://doi.org/10.1016/j.jallcom.2016.11.193.
X. Liu, M. Q. Zeng, Y. Ma, et al., Wear, 294–295, 387–394 (2012); https://doi.org/10.1016/j.wear.2012.07.021.
K. Q. Song, Z. C. Lu, M. Zhu, et al., Surf. Coat. Technol. 325, 682–688 (2017); https://doi.org/10.1016/j.surfcoat.2017.07.030.
N. M. Rusin, A. L. Skorentsev, and E. A. Kolubaev, J. Mater. Eng. Perf., 29, 1955–1963 (2020); https://doi.org/10.1007/s11665-020-04704-1.
S. Ayyanar, A. Gnanavelbabu, K. Rajkumar, et al., Met. Mater. Int., 27, 3040–3057 (2021); https://doi.org/10.1007/s12540-020-00710-z.
V. Selvakumar, S. Muruganandam, and N. Senthilkumar, Trans. Indian Inst. Met., 70, 1305–1315 (2017); https://doi.org/10.1007/s12666-016-0923-7.
N. M. Rusin and A. L. Skorentsev, Phys. Metals Metallogr., 122, 1248–1255 (2021); https://doi.org/10.1134/S0031918X21120085.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Rusin, N.M., Skorentsev, A.L. & Likharev, V.E. Effect of the Parameters of Forging with Various Pressing Axis on the Structure and Mechanical Properties of the Sintered Al–7Fe–38Sn Alloy. Russ Phys J 66, 960–969 (2023). https://doi.org/10.1007/s11182-023-03030-y
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-023-03030-y