Patterns on the formation of Fe–Cr–Al–Zr surface alloy on a Zr substrate are presented. The procedure was carried out by alternating magnetron deposition of Fe–Cr–Al films and their subsequent processing with low-energy high-current electron beams. The influence of the energy density on the morphology evolution of both chemical and phase compositions as well as the microstructure of the Fe–Cr–Al–Zr surface alloys were studied. The applied energy parameters led to partial or complete mixing of the deposited films with the substrates. In the first case, the surface alloy possessed both recrystallized layers of the deposited Fe–Cr–Al films and Fe–Cr–Al–Zr transition ones. With complete mixing of the deposited films and the substrates, the nanostructured Fe-Cr-Al-Zr surface alloys were observed. During high-temperature annealing, mutual diffusion rates of the constituent elements between the surface alloy and the substrates were lower by 3–15 times than those in the interface between the initially deposited films and the substrates.
Similar content being viewed by others
References
J. Yang, M. Steinbrück, C. Tang, et al., J. Alloys Compd., 895, 162450 (2022).
M. Slobodyan, Nucl. Eng. Des., 382, 111364 (2021).
M. A. Tunes, R.W. Harrison, S.E. Donnelly, et al., Acta Mater., 169, 237–247 (2019).
A. Michau, F. Maury, F. Schuster, et al., Coatings, 8, 220 (2018).
O. V. Maksakova, R. F. Webster, R. D. Tilley, et al., J. Alloy. Compd., 831, 154808 (2020).
T. Wei, R. Zhang, H. Yang, et al., Corros. Sci., 158, 108077 (2019).
J.-M. Kim, T-H Ha, J-S Park, et al., Metals, 6 (2), 29 (2016).
H.-G. Kim, I.-H. Kim, Y.-I. Jung, et al., Nucl. Eng. Technol., 46 (4), 521–528 (2014).
M. Ahmad, J. I. Akhter, G. Ali, et al., J. Alloy. Compd., 426 (1–2), 176–179 (2006).
A. Obrosov, A. N. Sutygina, A. Manakhov, et al., Metals, 8, 27 (2018).
N. V. Gavrilov, Nucl. Instrum. Methods Phys. Res., 439, 31–44 (2000).
J. C. Brachet, E. Rouesne, J. Ribis, et al., Corros. Sci., 167, 108537 (2020).
G. Neumann and C. Tuijn, Self-Diffusion and Impurity Diffusion in Pure Metals: Handbook of Experimental Data, Elsevier (2008).
W. Gong, H. Zhang, C. Wu, et al., Corros. Sci., 77, 391–396 (2013).
M. S. Syrtanov, E. B. Kashkarov, A. V. Abdulmenova, et al., Surf. Coat. Tech., 439, 128459 (2022).
A. B. Markov, A. V. Mikov, G. E. Ozur, et al., Instrum. Exp. Tech., 54, 862 (2011).
A. Markov, E. Yakovlev, D. Shepel, et al., Results Phys., 12, 1915–1924 (2019).
A. Markov, A. Solovyov, E. Yakovlev, et al., Mater. Chem. Phys., 292, 126821 (2022).
A. Markov, E. Yakovlev, D. Shepel, et al., Russ. Phys. J., 62, 1298–1305 (2019).
W. Xiang and S. Ying, China Nuclear Information Centre, CNIC-01562 (2001).
L. Nicolai and R. de Tendler, J. Nucl. Mater., 82, 439–443 (1979).
V. P. Rotshtein, V. O. Semin, S. N. Meisner, et al., Vacuum, 194, 110597 (2022).
K. Leelaruedee, Surf. Interfaces, 31, 102036 (2022).
B. C. Maji, S. Ukai, and N. Oono-Hori, Mater. Sci. Eng. A, 807, 140858 (2021).
K. G. Field, M. N. Gussev, Y. Yamamoto, et al., J. Nucl. Mater., 454, 352–358 (2014).
D. J. Park, H. G. Kim, Y. I. Jung, et al., J. Nucl. Mater., 482, 75–82 (2016).
Y. Wang, W. Zhou, Q. Wen, et al., Surf. Coat. Technol., 344, 141–148 (2018).
L. Chai, B. Chen, S. Wang, et al., Appl. Surf. Sci., 390, 430–434 (2016).
S. Yang, J. Cai, P. Lu, et al., Nucl. Instrum. Methods Phys. Res. B, 358, 151–159 (2015).
B. Samanta, P. Ramakrishna, S. Balakrishnan, et al., Calphad, 78, 102458 (2022).
F. Stein, G. Sauthoff, and M. Palm, J. Phase Equilibr., 23 (6), 480–494 (2002).
R. W. Gilbert, M. Griffiths, and G. J. C. Carpenter, J. Nucl. Mater., 135, 265–268 (1985).
J. Bowman, P. Wang, G. S. Was, et al., J. Nucl. Mater., 571, 153988 (2022).
S. Kano, H. Yang, K. Murakami, et al., Nucl. Instrum. Methods Phys. Res. B, 531, 1–8 (2022).
A. B. Markov, E. V. Yakovlev, A. V. Solovyov, et al., Russ. Phys. J., 66 (4), 410–415 (2023).
Yu. B. Kuzma, V. Y. Markiv, Yu. V. Voroshilov, et al., Inorg. Mater., 2, 222–225 (1966).
V. A. Yartys, H. Fjellvag, B. C. Hauback, et al., J. Alloys Compd., 274, 217–221 (1998).
M. V. Nevitt, J. W. Downey, and R. A. Morris, Trans. Metall. Soc. AIME, 218, 1019–1023 (1960).
I. Yu. Zavaliy, M. V. Lototsky, A. B. Riabov, et al., J. Alloys Compd., 219, 38–40 (1995).
B. Niu, Z. Wang, Q. Wang, et al., Prog. Nat. Sci., 32, 114–127, (2022).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Yakovlev, E.V., Pesterev, E.A., Slobodyan, M.S. et al. Formation of Fe–Cr–Al–Zr Surface Alloy on a Zirconium Substrate Using a Low-Energy High-Current Electron Beam. Russ Phys J 66, 810–822 (2023). https://doi.org/10.1007/s11182-023-03009-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-023-03009-9