A three-dimensional model of heating an anisotropic sample by laser radiation is presented. The influence of an oblique incidence of the beam and different orientations of the material structure relative to the Cartesian coordinate system is studied. It is shown that in the case of Ti-6Al-4V sintered powder, an inclusion of these phenomena into consideration has a significant effect on the maximum heating temperature and heating depth.
Similar content being viewed by others
References
B.Kianian, Wohlers Report 2016: 3D Printing and Additive Manufacturing State of the Industry, Annual Worldwide Progress Report: Chapter title: The Middle East (21st ed.), Wohlers Associates, Inc., Colorado (2016).
M. A. Khan, J. T. Winowlin Jappes, Innovations in Additive Manufacturing, Springer Cham, Cham (2022).
P. Peyre, E. Charkaluk, Additive Manufacturing of Metal Alloys 1: Processes, Raw Materials and Numerical Simulation (1st Ed.), Wiley-ISTE, London (2022).
S. V. Razorenov, G. V. Garkushin, A. S. Savinykh, et al., Phys. Mesomech., 25, 26 (2022). https://doi.org/10.1134/S1029959922010040.
M. V. Chepak-Gizbrekht and A. G. Knyazeva, Surfaces and Interfaces, 32, 1 (2022). https://doi.org/10.1016/j.surfin.2022.102107.
W. E. King, H. D. Barth, V. M. Castillo, et al., J. Mater. Process. Technol., 214, 2915 (2014). https://doi.org/10.1016/j.jmatprotec.2014.06.005.
L. Wang L, Q. Wei, Y. Shi, et al., Adv. Mater. Res., 233-235, 2844 (2011). https://doi.org/10.4028/www.scientific.net/AMR.233-235
S. L. Campanelli, G. Casalino, N. Contuzzi, et al., Proc. SPIE - The International Society for Optical Engineering, 1–7, (2014). https://doi.org/10.1117/12.912622.
J. Ciurana, L. Hernandez, and J. Delgado. Int. J. Adv. Manuf. Technol, 68, 1103 (2013). https://doi.org/10.1007/s00170-013-4902-4.
V. Gunenthiram, P. Peyre, M. Schneider, et al., J. Mater. Process. Technol, 251, 376 (2018). https://doi.org/10.1016/j.jmatprotec.2017.08.012.
V. M. Fomin, A. G. Malikov, A. A. Golyshev, et al., Zh. Fiz. Mezomekh., 25, No. 4, 34, (2022).
V. F. Formalev. Thermal Conductivity of Anisotropic Bodies. Part 1. Analytical Methods for Solving Problems [in Russian], Fizmatlit, Moscow (2014).
L. C. Zhang, Y. Liu, S. Li, et al., Adv. Eng. Mater., 20, 1 (2018). https://doi.org/10.1002/adem.201700842.
A. Pramanik. Int. J. Adv. Manuf. Technol, 70, 919-928 (2014). https://doi.org/10.1007/s00170-013-5326-x.
V. R. Utyaganova, A. V. Vorontsov, A. A. Eliseev, et al., Russ. Phys. J., 62, 1461 (2019).
C. L. Leung, R. Tosi, E. Muzangaza, et al., Materials & Design, 174, 1 (2019). https://doi.org/10.1016/j.matdes.2019.107792.
J. M. Blednova and M. A. Stepanenko, Scientific Journal of KubSAU, 107, No. 3, 1 (2015).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Maslov, A.L. Modeling the Influence of Anisotropic Structure of a Material on its Heating by Laser Beam. Russ Phys J 66, 81–87 (2023). https://doi.org/10.1007/s11182-023-02918-z
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-023-02918-z