The paper presents mathematical simulation of localized plastic deformation of metal-intermetallic laminated composites after equal channel angular pressing. Deformation of single-phase intermetallic specimens is compared with deformation of laminated composites with different arrangement of lamellas relative to the compression axis. The deformation curves are suggested for these composites. The proposed three-dimensional model is based on the approach combining the description of the plastic flow by the kinetics of the defect accumulation and continuum mechanics. Numerical modeling is based on the finite element method.
Similar content being viewed by others
References
A. Patselov, B. Greenberg, S. Gladkovskii et al., AASRI Procedia, 3, 107–112 (2012).
D. R. Lesuer, C. K. Syn, O. D. Sherby, et al., Int. Mater. Rev., 41, No. 5, 169–197 (1996).
Y. Zhang, X. Cheng, and H. Cai, Mater. Design, 92, 486–493 (2016).
Yu. V. Solov’eva, Ya. D. Lipatnikova, S. V. Starenchenko, et al., Russ. Phys. J., 60, No. 5, 830–840 (2017).
S. V. Starenchenko, Ya. D. Lipatnikova, and Yu. V. Solov’eva, Russ. Phys. J., 61, No. 4, 722–729 (2018).
S. V. Starenchenko, Yu. V. Solov’eva, and Starenchenko V. А., Thermal and Strain Hardening of Single Crystals in Alloys with L12 Structure [in Russian], Scientific Technology Publishing House, Tomsk (2006).
Yu. V. Solov’eva, Ya. D. Lipatnikova, V. A. Starenchenko, and L. A. Valuiskaya, Russ. Phys. J., 62, No. 12, 2240–2246 (2020).
V. A. Krasnoveikin, “Numerical modeling and experimental study of processes of severe plastic deformation of constructional light alloys under Equal and non-equal channel angular extrusion,” Candidate’s Dissertation in Physical and Mathematical Sciences [in Russian], Tomsk (2014).
Ya. D. Lipatnikova, V. A. Starenchenko, Yu. V. Solov’eva, and L. A. Valuiskaya, Acta Metall. Sin. Engl., 31, No. 12, 1265–1271 (2018).
Ya. D. Lipatnikova, Yu. V. Solov’eva, A. N. Solov’ev, and L. A. Valuiskaya, Russ. Phys. J., 60, No. 4, 609–614 (2017).
N. T. Yugov, N. N. Belov, and A. A. Yugov, Adiabatic Nonstationary Flows Analysis in Three-Dimensional Model (RANET-3), RF Certificate of State Registration of Software No. 2010611042 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 3–7, March, 2021.
Rights and permissions
About this article
Cite this article
Lipatnikova, Y.D., Valuiskaya, L.A., Solov’eva, Y.V. et al. Localized Plastic Deformation of Metal-Intermetallic Laminated Composites after Equal Channel Angular Pressing. Russ Phys J 64, 371–375 (2021). https://doi.org/10.1007/s11182-021-02339-w
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-021-02339-w