An investigation of the influence of reaction- and diffusion-induced interactions in the system of PV-N55Т45 TiNi-based powders and activating Co and Ni additions during sintering on special characteristics of microstructure and structural-phase compositions of porous TiNi-based alloys are investigated aimed at designing porous-monolithic structures. Using the method of liquid-phase sintering of TiNi-based powder, porous specimens with activating Co and Ni additions are manufactured with the concentrations of the latter being 0.5, 1.0, 1.5 and 2.0 at.%. It is found out that the activating action of Co is more moderate compared to that of Ni. A calculation of the heat released in the course of the chemical reaction as a result of introduction of activating additions demonstrates that the values of –∆H for manufacturing porous alloys with additions of Co and Ni are 28 and 52 kJ/mol, respectively. It is established that all specimens under study contain the following phases: austenitic B2, martensitic B19′, Ti2Ni, 2(О, N, С) and Ti3Ni4. Moreover, in the material with additions of Ni a TiNi3 phase is observed. Due to an introduction of a monolithic plate into the sintered powder mixture it is possible to compensate for the heat sink at the concentration of the activating Co addition 1.5 at.%. This allows manufacturing porous-monolithic structures based on the TiNi alloy with a high quality of fusion between the porous and monolithic parts.
Similar content being viewed by others
References
V. E. Gunther, V. N. Khodorenko, T. L. Chekalin, et al., Shape Memory Medical Materials and Implants, Volume 1 (Ed. V. E. Gunther) [in Russian], NPP MITZ Publ., (2011).
V. I. Itin and Yu. С. Naiborodenko, High-Temperature Synthesis of Intermetallic Compounds [in Russian], Tomsk Uni. Publ., (1989).
V. N. Khodorenko, S. G. Anikeev, and V. E. Gunther, Russ. Phys. J., 57, No. 6, 723–730 (2014).
N. V. Artyukhova, Yu. F. Yasenchuk, J. S. Kim, et al., Russ. Phys. J., 57, No. 10, 1313–1320 (2014).
V. V. Ovcharenko, A. N. Monogenov, Yu. F. Yasenchuk, et al., Tech. Phys. Ltt., 32, Iss. 7, 21–28. (2006).
V. V. Ovcharenko and V. A. Shabalin, Zh. Impl. s Pamyat. Formy, No. 1–2, 12–14 (2003).
I. K. Ratkin, A. A. Lutsik, Yu. I. Dorofeev, et al., Zh. Khirurg. Pozvonochn., No. 3, 46–49 (2004).
S. G. Anikeev, A. S. Garin, N. V. Artyukhova, et al., Russ. Phys. J., 61, No. 4, 749–756 (2018).
State Diagrams of Binary Metallic Compounds in 2 Vol. (Ed. N. P. Lyakishev) [in Russian], Mashinostroyeniye, Moscow (2018).
S. G. Anikeev, N. V. Artyukhova, V. N. Khodorenko, et al., Shape Memory Alloys, SMA 2018, Mater. Res. Proc., 9, 9–13 (2018).
Yu. G. Frolov, A Course-Book on Colloidal Chemistry. Surface Phenomena and Disperse Systems [in Russian], Khimiya, Moscow (1988).
A. A. Klopotov, A. I. Potekaev, E. V. Kozlov, et al., Crystallogeometrical and Crystallochemical Principles of Formation of Titanium- and Nickel-Based Binary and Ternary Compounds (Ed. A. I. Potekaev) [in Russian], Tomsk Polytechnic Uni. Publ., Tomsk (2011).
Thermal Constants of Substances; reference book in 10 Issues. Iss. 6, Part 2 (Zn, Cd, Hg, Cu, Ag, Au, Fe, Co, Ni, Ru, Rh, Pd, Os, Ir, Pt): Tables of literature references, appendixes, indexes (Ed. V. P. Glushko et al.), VINITI, Moscow (1973).
V. V. Pet’kov and M. V. Kireev, Zh. Metallofizika, Iss. 33, 107–115 (1971).
Z. Lekston and E. Lagiewka, Arch. Mater. Sci. Eng., 28, No. 11, 665–672 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 3, pp. 125–130, March, 2019.
Rights and permissions
About this article
Cite this article
Artyukhova, N.V., Kaftanarova, M.I., Anikeev, S.G. et al. The Influence of Activating Co and Ni Additions on the Mechanisms of Reaction and Diffusion Interaction During Sintering of PV-N55Т45 TiNi-Based Powders. Russ Phys J 62, 527–533 (2019). https://doi.org/10.1007/s11182-019-01741-9
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-019-01741-9