The paper studies the instability of the plastic flow and fracture of metal-intermetallic laminated composites using a three-dimensional multi-scale model of the dislocation kinetics and mechanics of the elastoplastic medium under the dynamic high-temperature compression. The suggested theoretical stress-strain curves represent the behavior of laminated composites at different deformation temperatures and layer arrangements. It is shown that the inclusion of soft plastic metallic layers into the intermetallic matrix stabilizes the plastic flow of laminated composites, significantly increases the plasticity and time to fracture and decreases the deformation resistance. The layer arrangement has no great effect on the stability of plastic deformation.
Similar content being viewed by others
References
V. A. Starenchenko, Yu. A. Abzaev, and N. A. Koneva, Fiz. Met. Metalloved., 64, No. 6, 1178–1182 (1987).
Yu. V. Solov’eva, Ya. D. Lipatnikova, S. V. Starenchenko, et al., Russ. Phys. J., 60, No. 5, 830–840 (2017).
A. Patselov, B. Greenberg, S. Gladkovskii, et al., AASRI Procedia, No. 3, 107–112 (2012).
M. I. Karpov, V. P. Korzhov, V. M. Kiiko, et al. Perspektivnye materialy, No. S13, 704–712 (2011).
Y. Du, G. Fan, T. Yu, et al., IOP Conf. Ser.: Mater. Sci. Eng., 89, (2015).
L. Qin, J. Wang, Q. Wu, et al., J. Alloy. Compd., 712, 69–75 (2017).
Y. Zhang, X. Cheng, and H. Cai, Mater. Design, 92, 486–493 (2016).
D. E. Alman, C. P. Dogan, J. A. Hawk, and J. C. Rawers, Mat. Sci. Eng. A-Struct., 192, 624–632 (1995).
N. Zobeiry, A. Forghani, C. McGregor, et al., Compos. Struct., 173, 188–195 (2017).
T. Li, F. Grignon, D. J. Benson, et al., Mat. Sci. Eng. A-Struct., 374, 10–26 (2004).
Y. Cao, C. Guo, S. Zhu, et al., Mater. Mat. Sci. Eng. A-Struct., 637, 235–242 (2015).
N. R. Barton, A. Arsenlis, and J. J. Marian, J. Mech. Phys. Solids., 61, 341–351 (2013).
P. S. Volegov, D. S. Gribov, and P. V. Trusov, Fizich. Mezomeh., 18, No. 6, 12–23 (2015).
N. N. Belov, Yu. V. Solov’eva, Ya. D. Lipatnikova, et al., Mathematical Simulation from Dislocation Interactions to Macroscopic Deformations [in Russian], V. A. Starenchenko, ed., TSUAB, Tomsk (2015).
Yu. V. Solov’eva, Ya. D. Fakhrutdinova, and V. A. Starenchenko, Phys. Met. Metallogr., 116, No. 1, 10–18 (2015).
Ya. D. Lipatnikova, Yu. V. Solov’eva, A. N. Solov’ev, and L. A. Valuiskaya, Russ. Phys. J., 60, No. 4, 609–614 (2017).
L. E. Popov, V. S. Kobytev, and T. A. Kovalevskaya, Russ. Phys. J., 25, No. 6, 520–541 (1982).
V. A. Starenchenko, O. D. Pantyukhova, D. N. Cherepanov, et al., Models of Plastic Deformation of FCC Materials [in Russian], NTL, Tomsk (2011).
V. A. Starenchenko, Yu. V. Solov’eva, Ya. D. Fakhrutdinova, and L. A. Valuiskaya, Russ. Phys. J., 54, No. 8, 885–897 (2011).
A. A. Pozdeev, P. V. Trusov, and Yu. I. Nyashin, Severe Elastoplastic Deformations: Theory, Algorithms, Applications [in Russian], Nauka, Moscow (1986).
N. T. Yugov, N. N. Belov, and A. A. Yugov, Adiabatic Nonstationary Flows Analysis in Three-Dimensional Model (RANET-3), RF Certificate of State Registration of Software No. 2010611042 (2010).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 72–77, December, 2018.
Rights and permissions
About this article
Cite this article
Lipatnikova, Y.D., Solov’ev, A.N., Starenchenko, V.A. et al. Strength Properties of Metal–Intermetallic Laminated Composites in Three-Dimensional Model. Russ Phys J 61, 2225–2230 (2019). https://doi.org/10.1007/s11182-019-01659-2
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-019-01659-2