Infrared heating was used to synthesize FeCoNi/С nanocomposites, where nanoparticles of FeCoNi ternary alloy are stabilized and uniformly distributed in the carbon matrix volume. The authors studied the impact of synthesis temperature and percentage ratio of metals upon the structure, composition and electromagnetic properties. X-ray phase analysis and Mössbauer spectroscopy showed that ternary alloy nanoparticles with different compositions and crystalline lattice types can be formed with the rise in synthesis temperature and iron concentration. Resonator method was used to examine frequency dependencies of relative complex dielectric and magnetic permeabilities of nanocomposites in the range of 3–12 GHz. Calculation of reflection coefficient based on experimental permeability data showed that by varying synthesis temperature and percentage ratio of metals one can control the frequency range of effective absorption of electromagnetic waves. It was established that increase in relative iron content from 33 to 50 rel.% leads to the shift of minimal electromagnetic wave reflection coefficient band from f ~ 12+ GHz to frequency f ~ 6 GHz at identical absorber thickness.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
S. P. Gubin, Y. I. Spichkin, G.Yu. Yurkov, and A. M. Tishin, Russ. J. Inorg. Chem., 47, S32 (2002).
A. Hui Lu, E. L. Salabas, and F. Schüth, Angew. Chem. Int. Ed., 46, 1222 (2007).
Y. H. Xu, J. Bai, and J. P. Wang, JMMM, 311, 131 (2007).
S. N. Khadzhiev, M. V. Kulikova, M. I. Ivantsov, et al., Pet. Chem., 56, 522 (2016).
M. H. Xu, W. Zhong, X. S. Qi, et al., J. Alloys Compounds, 495, 200 (2010).
M. Bahgat, Min-Kyu Paek, and Jong-Jin Pak, J. Alloys Compounds, 466, 59 (2008).
A. Azizi, H. Yoozbashizadeh, and S. K. Sadrnezhaad, JMMM, 321, 2729 (2009).
X. Li and S. Takahashi, JMMM, 214, 195 (2000).
S. B. Dalavia, J. Theerthagiria, M. M. Rajab, and R. N. Panda, JMMM, 344, 30 (2013).
N. Kr. Prasad and V. Kumar, J. Mater. Sci: Mater. Electron., 26, 10109 (2015).
K. Zehani, R. Bez, A. Boutahar, et al., J. Alloys Compounds, 591, 58 (2014).
Yong Yang, Caing Xu, Xogxin Xia, et al., J. Alloys Compounds, 493, 549 (2010).
X. G. Liu, Z. Q. Ou, D. Y. Geng, et al., Carbon, 48, 891 (2010).
N. Poudyal, G. S. Chaubey, C.-B. Rong, et al., Nanotechnology, 24, 345605 (2013).
L. M. Zemtsov, G. P. Karpacheva, Polymer Science, Series A [in Russian], 36, Issue 6, 919 (1994).
V. V. Kozlov, G. P. Karpacheva, V. S. Petrov, E. V. Lazovskaya Polymer Science, Series A [in Russian], 43, Issue 1, 20 (2001).
J. D. Moskowitz and J. S. Wiggins, Polymer Degradation and Stability, 125, 76 (2016).
P. Melnikov, V. A. Nascimento, I. V. Arkhangelsky, et al., J. Therm. Anal. Calorim., 115, 145 (2014).
V. G. Petrov, V. A. Aleksandrov, M. A. Shumilova, Chem. Phys. & Mesoscopy [in Russian], 16, Issue 1, 152 (2014).
I. I. Kalinichenko, A. I. Purtov, Russ. J. Inorg. Chem. [in Russian], 11, Issue 7, 1669 (1966).
D. Yu. Karpenkov, D. G. Muratov, L. V. Kozitov, et al., JMMM, 429, 94 (2017).
L. V. Kozhitov, M. F. Bulatov, V. V. Korovushkin, еt al., J. Nano- Electron. Phys., 7, 04103 (2015).
D. G. Muratov, L. V. Kozhitov, D. Yu. Karpenkov, et al., Russ. Phys. J., 60, Issue 11, 1924–1930 (2018).
Y. A. Abdu et al., JMMM, 280, 395 (2004).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 10, pp. 40–49, October, 2018.
Rights and permissions
About this article
Cite this article
Muratov, D.G., Kozhitov, L.V., Korovushkin, V.V. et al. Synthesis, Structure and Electromagnetic Properties of Nanocomposites with Three-component FeCoNi Nanoparticles. Russ Phys J 61, 1788–1797 (2019). https://doi.org/10.1007/s11182-019-01602-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-019-01602-5