The work is aimed at selecting a promising grade of a tool material, whose physical-mechanical characteristics would allow using it for processing the surfaces of discontinuous parts in the presence of shock loads. An analysis of the physical-mechanical characteristics of most common tool materials is performed and the data on a possible provision of the metal-working processes with promising composite grades are presented.
Similar content being viewed by others
References
E. A. Kudryashov, А. M. Nikonov, and A. V. Stetsurin, Russ. Eng. Res., 28, No. 6, 611–613 (2008). VDOI: https://doi.org/10.3103/S1068798x08060221.
E. A. Kudryashov and A. V. Stetsurin, Russ. Eng. Res., 28, No. 9, 924–925 (2008). DOI: https://doi.org/10.3103/S1068798X08090232.
E. A. Kudryashov and А. M. Nikonov, Russ. Eng. Res., 29, No. 3, 313–315 (2009). DOI: https://doi.org/10.3103/S1068798X09030241.
E. A. Kudryashov, А. M. Nikonov, V. S. Rogovskii, and A. V. Stetsurin, Russ. Eng. Res., 29, No. 2, 210–213 (2009). DOI: https://doi.org/10.3103/S1068798X09020221.
E. A. Kudryashov, D. Yu. Lunin, and E. V. Pavlov, Fund. Prikl. Probl. Tekh. i Tekhnolog., No. 5, 77–80 (2011).
E. A. Kudryashov, E. V. Pavlov, E. I. Yatsun, et al., Remont. Vosstanovl. Moderniz., No. 10, 37–38 (2010).
E. A. Kudryashov, A. Yu. Altukhov, and E. I. Yatsun, Fund. Prikl. Probl. Tekh. i Tekhnolog., No. 6, 79 (2011).
E. A. Kudryashov, E. I. Yatsun, E. V. Pavlov, et al., Izvest. of the Samara Scientific Center of the RAS, 12, Nos. 1–2, 401–403 (2010).
A. O. Khasanov, E. S. Dvilis, O. L. Khasanov, et al., Izvest. VUZov. Fiz., 56, No. 12/2, 222–225 (2013).
E. A. Kudryashov, Obrabot. Melal. (tekhnolog., oborudov., instrum.), No. 2, 50–55 (2012).
E. A. Kudryashov, A. Yu. Altukhov, and D. Yu. Lunin, Izvest. Gosud. Volgograd Tekhn. Uni., 6, No. 12(72), 10–15 (2010).
E. A. Kudryashov, A. Yu. Altukhov, D. Yu. Lunin, and E. N. Fomichev, Izvest. Gosud. Volgograd Tekhn. Uni., No. 12, 15–20 (2010).
G. V. Sakovich, S. A. Vorozhtsov, A. B. Vorozhtsov, et al., Russ. Phys. J., 59, No. 3, 104–109 (2016).
E. A. Kudryashov and I. M. Smirnov, Obrabot. Melal. (tekhnolog., oborudov., instrum.), No. 2 (59), 25–32 (2013).
A. N. Ischenko, An. N. Tabachenko, S. A. Afanasieva, et al., Russ. Phys. J., 58, No. 9, 1347–1352 (2016).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 2, pp. 39–43, February, 2018.
Rights and permissions
About this article
Cite this article
Kudryashov, E.A., Smirnov, I.M., Grishin, D.V. et al. An Overview of Promising Grades of Tool Materials Based on the Analysis of their Physical-Mechanical Characteristics. Russ Phys J 61, 248–252 (2018). https://doi.org/10.1007/s11182-018-1393-7
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-018-1393-7