Abstract
The results of investigations of fracture behavior in coarse-grained and ultrafine-grained aluminum under the action of a nanosecond relativistic high-current electron beam in a SINUS-7 accelerator and under conditions of quasi-static tensile loading are reported. It is shown that for both types of deformation, irrespective of the grain size, the fracture is ductile both in deformation and structural features. Based on the examination of the fracture surface, it is found out that under quasi-static loading decohesion of coarse-grained and ultrafine-grained aluminum occurs through shear, and under spalling condition by rupture. It is shown for both grain structures that the thickness of the separated layer increases with the irradiated specimen thickness.
Similar content being viewed by others
References
R. Z. Valiev and I. V. Aleksandrov, Nanostructured Materials Produced by Severe Plastic Deformation [in Russian], Moscow, Logos (2000).
Yu. R. Kolobov, R. Z. Valiev, G. P. Grabovetskaya et. al., Grain-Boundary Diffusion and Properties of Nanostructured Materials [in Russian], Novosibirsk, Nauka (2001).
N. I. Noskova and R. R. Mulyukov, Submicrocrystalline and Nanocrystalline Metals and Alloys [in Russian], Ekaterinburg, UrB RAS (2003).
S. P. Malysheva, R. M. Galeev, S. V. Zherebtsov, and G. A. Salischev, Fiz. Tekhn. Vysok. Davlenii, 12, No. 4, 66–75 (2002).
E. F. Dudarev, G. P. Grabovetskaya, Yu. R. Kolobov, et. al., Metals [in Russian], No. 1, 87–95 (2004).
R. Z. Valiev, Rossiskiye Nanotekhnol., 1, Nos. 1–2, 208–216 (2002).
R. Z. Valiev and I. V. Aleksandrov, Bulk Nanostructured Metallic Materials: Production, Structure and Properties, Moscow, Akademkniga (2007).
V. A. Skripnyak and E. G. Skripnyak, Physical Mesomechanics, 7, Sp. Issue, Part I, 297–300 (2004).
E. G. Skripnyak, V. A. Skripnyak, and S. V. Chakhlov, 7, Sp. Issue, Part I, 301–304 (2004).
A. S. Savinykh, S. V. Razorenov, and G. I. Kanel’, Physics of Strength and Plasticity of Materials [in Russian], Samara State Technical University Publ., Samara (2006).
T. Antoun, L. Seaman, D. R. Currant, et al., Spall Fracture, N.Y.: Springer Verlag (2003).
G. I. Kanel, S. V. Razorenov, A. V. Utkin, et al., J. Appl. Phys., 90, No. 1, 136–143 (2001).
K. Baumung, H. Bluhm, G. I. Kanel, et al., Intern. J. of Impact Engineering, 25, 631–639 (2001).
A. Ya. Uchaev, S. A. Novikov, V. A. Tzukermann, et al., Dokl. Akad. Nauk USSR, 310, No. 1, 611–614 (1990).
A. B. Markov, S. A. Kitsanov, V. P. Rotstein, et al., Rus. Phys. J., No. 7, 758–765 (2006).
S. D. Korovin and V. V. Rostov, Rus. Phys. J., No. 12, 1163–1176 (1996).
A. I. Gordienko, Mechanisms of Organization of Plastic Flow and Subsequent Fracture at the Meso-and Macroscale Levels in the Neck of High-Strength Polycrystals under Static Tensile Loading, The Author’s Abstract of Dissert. Cand. Engineering Sciences, Tomsk (2007).
V. E. Panin, Yu. V. Grinyaev, and A. V. Panin, Physical Mesomechanics, 10, No. 5, 5–16 (2007).
Author information
Authors and Affiliations
Corresponding author
Additional information
__________
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 12, pp. 32–38, December, 2007.
Rights and permissions
About this article
Cite this article
Dudarev, E.F., Markov, A.B., Tabachenko, A.N. et al. Spall fracture of coarse-grained and ultrafine-grained aluminum under nanosecond relativistic high-current electron beam. Russ Phys J 50, 1205–1211 (2007). https://doi.org/10.1007/s11182-008-9002-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11182-008-9002-9