Abstract
Electron diffraction microscopy of thin foils is used to study the defect substructure of armco iron subjected to equal channel angular extrusion at room temperature, using the processing route A. The morphology of the defect substructure is shown to be substantially affected by the section plane of the billets. The results obtained suggest that the evolution of the defect substructure of the material subjected to equal channel angular extrusion is clearly revealed only by examining no fewer than three mutually perpendicular section planes.
Similar content being viewed by others
REFERENCES
V. M. Segal, V. I. Reznikov, V. I. Kopylov, et al., Processes of Plastic Structure Formation of Metals [in Russian], Nauka Tekh., Minsk (1994).
Yu. R. Kolobov and R. Z. Valiev (eds.), Grain Boundary Diffusion and Properties of Nanostructured Materials [in Russian], Nauka, Novosibirsk (2001).
R. Z. Valiev and I. A. Alexandrov, Nanostructured Materials Produced by Severe Plastic Deformation [in Russian], Logos, Moscow (2000).
V. I. Izotov, V. V. Rusanenko, V. I. Kopylov, et al., Fiz. Met. Metalloved., 82, No.3, 123–135 (1996).
V. N. Gridnev, V. G. Gavrilyuk, and Yu. Ya. Meshkov, Strength and Plasticity of Cold-Strained Steel [in Russian], Naukova Dumka, Kiev (1974).
Yu. F. Ivanov and E. V. Kozlov, Izv. Vyssh. Uchebn. Zaved., Chern. Metall., No. 8, 38–41 (1991).
N. A. Koneva and E. V. Kozlov, Vestnik TGASU, No. 1, 21–35 (1999).
L. M. Utevskii, Electron Diffraction Microscopy in Physical Metallurgy [in Russian], Metallurgiya, Moscow (1973).
V. E. Gromov and E. V. Kozlov (eds.), Physics and Mechanics of Drawing and Die Forging [in Russian], Nedra, Moscow (1997).
Author information
Authors and Affiliations
Additional information
__________
Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, No. 4, pp. 70–74, April, 2005.
Rights and permissions
About this article
Cite this article
Ivanov, Y.F., Panin, A.V., Son, A.A. et al. Structural Analysis of Armco Iron Subjected to Equal Channel Angular Extrusion. Russ Phys J 48, 406–411 (2005). https://doi.org/10.1007/s11182-005-0140-z
Received:
Revised:
Issue Date:
DOI: https://doi.org/10.1007/s11182-005-0140-z