Skip to main content
SpringerLink
Log in

The Modern Status of Inspection of Certain Magnetic Characteristics of Anisotropic Electrical Steel (Review)

  • Magnetic Methods
  • Published:
Russian Journal of Nondestructive Testing Aims and scope Submit manuscript

Abstract

Problems of the existing system for testing electrical steel are briefly considered in this review. One of these problems is the necessity of developing automated facilities for testing magnetic characteristics and software and hardware for these facilities, organization of their production, and their metrological certification. The results of recent studies aimed at the investigation of nonstandardized magnetic characteristics are analyzed in more detail. The objective of these studies was not so much to ensure more efficient industrial testing of the steel quality as it was to study the specific features of processes occurring in metals, thereby contributing to the development of objective concepts on the physics of electrical-steel magnetization reversal. This class of characteristics incorporates, e.g., the coercive force (H c ), the value and character of anisotropy of the magnetic properties, the degree of perfection of the crystallographic texture, the value and character of the distribution of internal mechanical stresses and the influence of electrically insulating coatings on them, and the energy loss caused by the rotational magnetization reversal.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

REFERENCES

  1. Neiman, Z.B., The Application of Textured Electrical Steel in Heavy Engineering, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 95–102.

    Google Scholar 

  2. Fishler, Ya.L., Electrical Steel in Transformer Building, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 102–105.

    Google Scholar 

  3. Voevodin, I.D., Application of Cold-Rolled Electrical Steel in Power Transformers, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 105–108.

    Google Scholar 

  4. Pechenov, V.G., Requirements for Electrical Steel Used for Power Transformers, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 109–112.

    Google Scholar 

  5. Karetnikova, E.I., Requirements for Electrical Steels Used in Radio-Electronic Industry, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 113–114.

    Google Scholar 

  6. Marder, M.E., Application of Ribbon Electrical Steels in Electromagnetic Devices, Problemy proizvodstva i primeneniya elektrotekhnicheskikh stalei (Problems of Production and Application of Electrical Steels), Sverdlovsk: TsBTI, 1960, pp. 114–117.

    Google Scholar 

  7. Maiorets, A.I., Pshenichnyi, G.I., Chechelyuk, Ya.Z., et al., Magnitoprovody silovykh transformatorov (Power Transformer Cores) Moscow: Energiya, 1973.

    Google Scholar 

  8. Molotilov, B.V., Mironov, L.V., Petrenko, A.G., et al., Kholodnokatanye elektrotekhnicheskie stali. Spravochnik (Handbook on Cold-Rolled Electrical Steels), Moscow: Metallurgiya, 1989.

    Google Scholar 

  9. Dubrov, N.F. and Lapkin, N.I., Elektrotekhnicheskie stali (Electrical Steels), Moscow: TNTIL Chernoi i Tsvetnoi Metallurgii, 1963.

    Google Scholar 

  10. Kazarnovskii, L.Sh., Sheet Electrical Steel, Elektrotekhnicheskie materialy, elektricheskie kondensatory, provoda i kabeli. Itogi nauki i tekhniki (Electrical Materials, Electric Capacitors, Wires, and Cables. Science and Technology Totals), Moscow: VINITI Akad. Nauk SSSR, 1969, pp. 5–74.

    Google Scholar 

  11. Molotilov, B.V., Petrenko, A.G., and Petlyakov, M.M., State-of-the-Art Problems of Transformer Steels, Metalloved. Term. Obrab. Met., 1970, no. 4, pp. 28–44.

  12. Druzhinin, V.V., Magnitnye svoistva elektrotekhnicheskoi stali (Magnetic Properties of Electrical Steel), Moscow: Energiya, 1974.

    Google Scholar 

  13. Molotilov, B.V. and Mironov, L.V., Modern Electrical Steels, Elektrotekhnika, 1983, no. 6, pp. 33–36.

  14. Borisenko, V.G., Nefedov, A.A., and Zaidman, I.D., Low-Carbon Steel for Magnetic Circuits of DC Machines, Elektrotekhnika, 1965, no. 7, pp. 39–40.

  15. Molotilov, B.V., Petrenko, A.G., and Sosnin, V.V. Electrical Steels for Instrument-Making Industry, Metalloved. Term. Obrab. Met., 1968, pp. 134–138.

  16. Ageev, G.A., Belaykov, A.I., Grebennik, N.G., et al., New Electrical Steel Grades, Stal', 1967, no. 5, pp. 453–455.

  17. Chuiko, N.M., Moshkevich, E.I., Perevyazko, A.T., and Galitskii, Yu.P., Transformatornaya stal' (Transformer Steel), Moscow: Metallurgiya, 1970.

    Google Scholar 

  18. Yanus, R.I., “Electrical Iron” or “Steel”?, Fiz. Met. Metalloved., 1958, vol. 6, no.2, pp. 382–384.

    Google Scholar 

  19. Shteinberg, S.S., Metallovedenie. Tom 3: Spetsial'nye stali (Physical Metallurgy. Vol. 3: Special Steels), Sverdlovsk-Moscow: ONTI-NKTP, 1935, chapter IV: Silicon Steels, pp. 70–91.

    Google Scholar 

  20. Elektrotekhnicheskie stali (Electrical Steels), Moscow: Metallurgiya, 1968, no. 68.

  21. Wiener, G.W., Metallurgy of Oriented Silicon Steels, J. Appl. Phys., 1964, vol. 35, no.3, Part 2, pp. 856–860.

    Article  CAS  Google Scholar 

  22. Thompson, I.E., Modern Developments in Silicon-Iron, Electr. Manufact., 1967, vol. 8, no.9, pp. 11–13.

    Google Scholar 

  23. Kochnov, V.E., Galyan, V.S., et al., Effect of Aluminum and Nitrogen on Properties of Transformer Steels, Teoriya i praktika metallurgii (Theory and Practical Applications of Metallurgy), Chelyabinsk: 1966, no. 8, pp. 177–184.

  24. Zaidman, I.D., Effect of Carbide Phase on Properties of Transformer Steels, Metalloved. Term. Obrab. Met., 1966, no. 6, pp. 27–29.

  25. Ershova, L.P., Kolov, M.I., and Terekhova, A.I., Effect of Metal Oxidation on Properties of Transformer Steels, Stal', 1964, no. 3, pp. 266–268.

  26. Garnyk, G.A. and Samarin, A.M., Effect of Some Elements on Properties of Electrical Steels, Elektrichestvo, 1962, no. 2, pp. 71–73.

  27. Chuiko, N.M., Perevyazko, A.E., et al., Effect of the Chemical Composition of Metal and the Amount of Nitrogen and Oxygen on Electrical Properties of Transformer Steel, Tr. Dnepropetr. Metallurg. Inst., 1963, no. 51, pp. 3–16.

  28. Kadykova, G.N., Molotilov, B.V., and Sosnin, V.V., Effect of Alloying Dopants of Manganese and Nickel on (100)[001] Texture Formation in Transformer Steels, Tr. VNIIChM, 1969, no. 71, pp. 119–124.

  29. Kharitonov, A.S., Anisimova, R.A., and Medvedev, M.A., Effect of Arsenic on Properties of Electrical Steels, Tr. Zhdanov. Metallurg. Inst., 1971, no. 14, pp. 112–122.

  30. Benford, J.G., Effect of Sulfur on Magnetic Properties of Textured Silicon Steel Containing 3.25% Silicon in Strong Fields, J. Appl. Phys., 1967, vol. 38, no.3, pp. 1100–1101.

    Article  CAS  Google Scholar 

  31. Gorlach, I.A., Dubrov, N.F., and Lyasko, M.V., Effect of Nitrides, Oxides, and Sulfides on Magnetic Properties of Textured Transformer Steel, Stal', 1966, no. 9, pp. 850–853.

  32. Druzhinin, V.V., Kurennykh, U.A., and Prasova, T.I., Effect of Carbon on Magnetic Properties and the Structure of Cold-Rolled Transformer Steel after Repeated Annealing, Izv. Akad. Nauk SSSR, Ser. Fiz., 1975, vol. 39, no.7, pp. 1547–1550.

    CAS  Google Scholar 

  33. Kovalenko, A.N., et al., Effect of a Nickel Film on Reversible Magnetic Susceptibility of E330 Transformer Steel, Fiz. Met. Metalloved., 1971, vol. 32, no.2, pp. 413–424.

    Google Scholar 

  34. Puzhevich, R.B., Borisenko, V.G., et al., Production and Properties of Coatings for Electrical Cold-Rolled Anisotropic Steel, Chern. Metal., Byull. NTI, 1983, no. 4(936), pp. 14–21.

    Google Scholar 

  35. Puzhevich, R.B., Borisenko, V.G., and Shvartsman, L.A., Current Line of Investigations for Producing Efficient Coatings on Anisotropic Electrical Steel, Chern. Metal. Byull. NTI, 1986, no. 7(1011), pp. 2–10.

    Google Scholar 

  36. Sheiko, L.M., Effect of Mechanical Stresses in Insulating Coatings on the Domain Structure and Magnetic Properties of Silicon Iron, Extended Abstract of Cand. Sci. Dissertation, Institute of Metal Physics, Ural Sci. Center, Acad. Sci. USSR, Sverdlovsk, 1985.

    Google Scholar 

  37. Zhakov, S.V. and Filippov, B.N., Effect of Coatings on the Domain Structure of Highly Textured Electrical Steel, Izv. Akad. Nauk SSSR, Ser. Fiz., 1982, vol. 46, no.4, pp. 655–659.

    Google Scholar 

  38. Khanzhina, T.A., Bamburov, V.G., Dragoshanskii, Yu.N., et al., A Solution for Covering Steels with Insulating Coatings and the Method for its Producing, USSR Inventor's Certificate no. 1608243, Byull. Izobret., 1990, no. 43.

  39. Steger, J.F., Magnesium-Oxide-Based Coating for Transformer Steel, US Patent no. 3 582 407, 1971.

  40. Dubinin, G.N., Frolov, Yu.P., Nogitskaya, Yu.M., and Zinov'eva, E.V., Improving Characteristics of Electrical and Magnetic Properties of E310 and E44 Steels by Hot-Air Oxidation, Tr. Mosk. Aviatsion. Inst., 1971, no. 237, pp. 81–94.

  41. Baryatinskii, V.P., et al., Effect of an Insulating Coating on Magnetic Properties of Superfine Electrical Steel Ribbon, Magnitnye elementy diskretnogo deistviya (Discrete-Action Magnetic Elements), Moscow: Nauka, 1972, pp. 167–169.

    Google Scholar 

  42. Moses, A.J., Pegel, S.M., and Thompson, J.E., The Role of Bonderite in Determining Magnetic Properties of Silicon Steel with Cube-on-Edge Texture, Proc. Inst. Elec. Eng., 1979, vol. 119, no.8, pp. 1222–1228.

    Google Scholar 

  43. Foster, K., Seidel, J., Coating for Textured Transformer Steel, Magn. Magn. Mater., 1972, pp.1514–1518.

  44. Brashevan, G.A., Antonova, L.F., and Andrianov, N.T., Effect of Stresses Induced by Coatings on the Structure and Properties of Transformer Steel, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 123–126.

    Google Scholar 

  45. Bukarev, V.N., et al., Water Absorbency of Heat-Insulating Coatings, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 126–129.

    Google Scholar 

  46. Kazadzhan, L.B., Khvatova, N.F., Frantsenyuk, I.V., Shapovalov, A.P., et al., The Formation of an Oxide Film on the Surface of Transformer Steel with Magnesium-Hydrate Thermo-Protective Coating during Annealing, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 129–131.

    Google Scholar 

  47. Alekseenko, G.V., Gel'perin, B.B., Kamenetskii, S.L., et al., Covering of Coiled Electrical Steel with a Dry Heat-Resistant Coating in Electric Field, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 135–137.

    Google Scholar 

  48. Naumann, F., Influence of External Mechanical Loading on Magnetic Properties of Textured Electrical Steel, Elektrotechn. Zs. A, 1965, vol. 86, no.26, pp. 847–849.

    Google Scholar 

  49. Zaikova, V.A. and Shur, Ya.S., On the Effect of Tension on Magnetic Properties and Magnetostriction Curves of Silicon Iron, Fiz. Met. Metalloved., 1966, vol. 21, no.5, pp. 664–673.

    CAS  Google Scholar 

  50. Zeistner, K. and Notzon, H., Verlustmessungen unter tangentialen mechanisehen Spannungen im Elektroblechpaket, ETZ, A, 1966, vol. 87, no.19, pp. 701–706.

    Google Scholar 

  51. Namitokov, K.K. and Brezinskii, V.G., Effect of Tension Loadings on the Magnetization Curve of Sheet Electrical Steels, Elektrotekhnika, 1967, no. 2, pp. 49–51.

  52. Korzunin, G.S. and Uvarova, M.P., Determining Internal Stresses in Sheets of Hot-Rolled Transformer Steel, Defektoskopiya, 1969, no. 4, pp. 131–140.

  53. Korzunin, G.S., Tarasyuk, B.A., and Uvarova, M.P., Studying the Magnitude and Character of Residual Stresses in Electrical Steel Sheets, Izv. Akad. Nauk SSSR, Ser. Fiz., 1970, no. 2, pp. 281–288.

  54. Druzhinin, V.V., Effect of Elastic Bending of Plates on Magnetic Properties of Electrical Steel, Elektrotekhnika, 1973, no. 7, pp. 50–57.

  55. Druzhinin, V.V. and Chistyakov, V.K., Effect of Compressive Stresses on Magnetic Properties of Electrical Steel, Elektrotekhnika, 1973, no. 1, pp. 52–55.

  56. Janda, E. and Rothbauer, A., Effect of Mechanical Stresses on Magnetic Properties of a Textured Transformer Sheet, Huth. Listy, 1974, vol. 29, no.1, pp. 36–40.

    Google Scholar 

  57. Perryman, R., Effect of Tensile and Compressive Stresses on Anisotropic Steel with 3% Silicon, J. Phys. D: Appl. Phys., 1975, no. 8, no. 15, pp. 1901–1909.

    Google Scholar 

  58. Korzunin, G.S., Uvarova, M.P., and Zenin, E.I., Dependence of Harmonic Composition for the Curve of the Magnetization-Vector Normal Component in Electrical Steel Sheets on the Magnitude of Tensile Stresses, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 121–122.

    Google Scholar 

  59. Druzhinin, V.V., Changing Magnetic Losses in Transformer Steel under the Effect of Nonuniform Normal Pressure, Fiz. Met. Metalloved., 1979, vol. 48, no.1, pp. 41–45.

    Google Scholar 

  60. Korzunin, G.S. and Uvarova, M.P., Determining Internal Stresses in Textured Electrical Steel, Elektrotekh. Mater., 1979, no. 10(111), pp. 7–8.

    Google Scholar 

  61. Saito, A., Nakamura, H., and Narita, K., Effect of Tensile Stresses on Magnetization Processes in Textured 3% Si Steel Sheets, J. Magn. Magn. Mater., 1980, vol. 19, pp. 69–71.

    Article  CAS  Google Scholar 

  62. Durnev, V.D., Mekhanicheskie svoistva elektrotekhnicheskikh stalei (Mechanical Properties of Electrical Steels), Leningrad: Znanie, 1965.

    Google Scholar 

  63. Gertman, Yu. M., Dubrov, N.F., and Pimenov, Yu.A., Reducing Specific Losses in Transformer Steels by Inducing Small Stresses in a Crystal Lattice, Fiz. Met. Metalloved., 1967, vol. 23, no.5, pp. 857–861.

    Google Scholar 

  64. Zyulin, P.K., Kazadzhan, L.B., Polyakov, N.P., et al., Mechanical Stresses Induced in Electrical Steel upon Continuous Annealing, Izv. Akad. Nauk SSSR, No. 7, pp. 1515–1518.

  65. Fasching, J.M. and Hofmann, H., Bestimmung die Feldbild in Texturbleshen, Elektrotechn. Maschinenbau, 1965, vol. 82, no.2, pp. 49–52.

    Google Scholar 

  66. Yoslin, P.C., Moses, A.J., and Thompson, J.E., On Some Questions of the Effect of Longitudinal and Normal Stresses on Losses and Flux Distribution in Transformer Reel, Proc. Inst. Elect. Eng., 1972, vol. 119, no.6, pp. 709–716.

    Google Scholar 

  67. Sokolov, A.D., On the Effect of Elastic Stresses on Electromagnetic Properties of Electrical Steels, Fiz. Met. Metalloved., 1957, vol. 4, no.3, pp. 555–558.

    Google Scholar 

  68. Ur'yash, F.V. and Nazarov, M.M., Effect of Edge Deformation of Pressed Plates on Properties of Magnetic Cores, Vestn. Promyshl., 1961, no. 5, pp. 62–64.

  69. Brailsford, F. and Abu-Eid, Z.H.M., Effect of Tensile Stress on Magnetic Properties of Grain-Oriented Silicon-Iron Lamination, Proc. Inst. Electr. Eng., 1963, vol. 110, no.4, pp. 751–757.

    Google Scholar 

  70. Krivonos, N.F., Rudaevskii, E.Ya., Levin, G.A., and Grishchenko, I.M., Dependence of Specific Loss in Electrical Steels on a Compressive Pressure in Packs and Increase in the Weight of Lacquer Coatings, Energ. Elektrotekh. Promyshl., 1964, no. 1(17), pp. 59–60.

    Google Scholar 

  71. Gumenyuk, A.A., Ivanchenko, O.N., Talin, E.M., and Trakhman, P.M., Effect of the Method for Manufacturing Power-Transformer Magnetic Cores on Losses in Steel, Elektrotekhnika, 1966, no. 4, pp. 22–23.

  72. Eingorn, I.Ya., Effect of Magnetic-Circuit Molding on Electromagnetic Parameters of Power Transformers, Elektrotekhnika, 1967, no. 4, pp. 48–52.

  73. Thompson, J.E., A Review Some Interdisciplinary Work on Grain-Oriented Silicon-Iron and Its Use in Large Power Transformers, J. Mater. Sci., 1967, vol. 2, no.4, pp. 395–403.

    Article  CAS  Google Scholar 

  74. Bronin, S.V., Kagan, Ya.I., Sidorenko, I.Ya., et al., Effect of Manufacturing Method of Stator Packs on Parameters of Induction Motors, Tr. Vseros. Nauchno-issledov. proektno-konstruktor. Inst. Tekhnol. Elektromashinostr., 1979, no. 10, pp. 23–25.

  75. Grigoryan, S.S. and Vardanyan, V.V., On the Determination of Allowable Molding Force for Electric-Motor Stator Cores, Izv. Vyssh. Uchebn. Zaved., Mashinostroenie, 1973, no. 5, pp. 185–189.

  76. Talyshinskii, R.I., Effect of Hardening on Electromagnetic Parameters of Magnetic Circuits, Elektrotekhnika, 1976, no. 5, pp. 34–36.

  77. Borisenko, A.V., Kazarinova, T.A., Effect of Cutting, Blanking, and Deburring on Magnetic Properties of Electrical Cold-Rolled Steel, Tr. Leningr. Politekhn. Inst., 1977, no. 359, pp. 88–91.

  78. Shekhtman, Yu.M., Chechelyuk, Ya. Z., Progressivnye tekhnologicheskie protsessy izgotovleniya magnitoprovodov silovykh transformatorov (Advanced Manufacturing Methods for Producing Magnetic Circuits for Power Transformers), Moscow: Informstandartelektro, 1967.

    Google Scholar 

  79. Davydov, V.F., Kopylenko, Yu.A., Krepkov, A.D., and Talyshinskii, R.I., Studying the Effect of Mechanical Parameters on Stamping Ability of Electrical Steels with and without Coatings, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 150–152.

    Google Scholar 

  80. Durnev, V.D., Medvedev, V.V., and Tropina, N.I., Investigation of the Process of Silicon Iron Cutting, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 155–156.

    Google Scholar 

  81. Vlasov, K.B., On the Effect of Grain Size on Magnetic Properties of Ferromagnetic Material Sheets in High-Induction Region, Fiz. Met. Metalloved., 1955, vol. 1, no.1, pp. 70–74.

    Google Scholar 

  82. Mironov, L.V., Texture Formation upon Annealing of Cold-Rolled Transformer Steel, Izv. Akad. Nauk SSSR, Ser. Fiz., 1958, vol. 22, no.10, pp. 1231–1236.

    CAS  Google Scholar 

  83. Kolov, M.I., Ershova, L.P., and Selivanov, N.M., Effect of Grain Size on Magnetic Properties of Cold-Rolled Transformer Steel, Stal', 1962, no. 8, pp. 744–747.

  84. Druzhinin, V.V., Kazadzhan, L.B., and Prasova, T.I., Dependence of Additional Eddy-Currents Loss on the Grain Size in Fine-Grained Dynamo Steel, Fiz. Met. Metalloved., 1962, vol. 13, no.4, pp. 635–636.

    Google Scholar 

  85. Agapova, E.V., On the Relation between the Grain Size and Grain Orientation in Cold-Rolled Transformer Steel, Fiz. Met. Metalloved., 1963, vol. 16, no.4, pp. 620–622.

    CAS  Google Scholar 

  86. Vorob'ev, G.M., Grechnyi, Ya.V., and Kotova, L.I., Effect of Texture Perfection and Grain Size on Magnetic and Electrical Properties of Transformer Steel, Stal', 1965, no. 1, pp. 67–71.

  87. Kudryavtsev, I.P., Tekstura v metallkh i splavakh (Texture in Metals and Alloys), Moscow: Metallurgiya, 1965.

    Google Scholar 

  88. Vorob'ev, G.M., Grechnyi, Ya.V., and Kotova, L.I., Dependence of Specific Loss in Cold-Rolled Steel on (110)[001] Texture Perfection, Struktura i svoistva teksturovannykh metallov i splavov (Structure and Properties of Textured Metals and Alloys), Moscow: Nauka, 1969, pp. 72–74.

    Google Scholar 

  89. Titorov, D.B., Sokolov, B.K., and Schastlivtseva, I.K., Controlling the Size and Shape of Grains in Textured Transformer Steel, Fiz. Met. Metalloved., 1972, vol. 34, no.4, pp. 811–815.

    CAS  Google Scholar 

  90. Yanda, E., Rothbauer, A., Effect of Grain Size on Magnetic Properties of Grain-Oriented Transformer Sheets, Huth. Listy, 1973, vol. 28, no.4, pp. 263–266.

    Google Scholar 

  91. Grebennik, N.P., Druzhinin, V.V., Mironov, L.V., and Yaroshenko, V.D., Magnetic Properties of Unalloyed Electrical Steel with Various Degrees of Texture Perfection, Izv. Akad. Nauk SSSR, Ser. Fiz., 1975, vo. 39, no.7, pp. 1434–1436.

    Google Scholar 

  92. Starodubtsev, Yu.N., On the Effect of Crystallographic Texture on Energy Loss in Electrical Steel, Izv. Akad. Nauk SSSR, Ser. Fiz., 1975, vol. 39, no.7, pp. 1369–1371.

    Google Scholar 

  93. Schastlivtseva, I.K., Sokolov, B.K., Titorov, D.B., and Gubernatorov, V.V., On the Control of the Size and Shape of Grains in Transformer Steel, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 20–25.

    Google Scholar 

  94. Schastlivtseva, I.K., Kazadzhan, L.B., Sokolov, B.K., et al., Effect of the Shape and Size of Grains on Magnetic Properties of Textured Transformer Steel, Fiz. Met. Metalloved., 1976, vol. 41, no.3, pp. 442–448.

    Google Scholar 

  95. Dunaev, F.N., Ivanchenko, S.N., and Mirtropol'skii, S.O., Dependence of Magnetic Induction and Specific Loss on the Corner Design of Closed Laminated Core, Uchen. Zapiski Ural. Univ., 1967, no. 62, pp. 96–99.

  96. Durnev, V.D. and Khutoretskii, G.M., The Experience of Using Textured Electrical Steel on “Elektrosila” Works and Requirements for It, Struktura i svoistva teksturovannykh metallov i splavov (Structure and Properties of Textured Metals and Alloys), Moscow: Nauka, 1969, pp. 131–134.

    Google Scholar 

  97. Sokolov, B.K., Dragoshanskii, Yu.N., Gubernatorov, V.V., et al., Improving Magnetic Properties of Laser-Processed Anisotropic Electrical Steel, Fiz. Met. Metalloved., 1989, no. 3, pp. 570–577.

  98. Sokolov, B.K., Gubernatorov, V.V., Chistyakov, V.K., et al., Lazernaya obrabotkra elektrotekhnicheskoi stali v uprugo rastyanutom stoyanii (Laser Processing of Elastically Tensioned Electrical Steels), Available from VINITI, 1989, Sverdlovsk, no. 7102-V89.

  99. Sokolov, B.K. and Dragoshanskii, Yu.N., Structural Barriers and Magnetic Loss in Anisotropic Electrical Steels, Fiz. Met. Metalloved., 1991, no. 1, pp. 92–102.

  100. Shturkin, D.A., Magnetostriction in Silicon Iron, Izv. Akad. Nauk SSSR, Ser. Fiz., 1947, vol. 11, no.6, pp. 661–664.

    Google Scholar 

  101. Thompson, J.E., Magnetostriction and Transformer Noise, J. Inst. Electr. Eng., 1963, no. 9, pp. 72–74.

  102. Elnekave, N., Magnetostriction as a Cause for Transformer Noise, Rev. Gen. Elect., 1966, vol. 75, no.1, pp. 82–84.

    Google Scholar 

  103. Nentwich, G. and Hofmann, H., Magnetostriction in Textured Electrical Steel, Z. Angew. Phys., 1969, vol. 28, no.3, pp. 165–167.

    Google Scholar 

  104. Nentwich, G., Magnetostriction and the Orientation of Plates with Goss Texture, Elektkrotechn. Zeitschr. A, 1970, vol. 91, no.10, pp. 577–579.

    Google Scholar 

  105. Durnev, V.D. and Zabelina, E.M., On the Determination of Polythickness of Electrical Steel, Zavod. Lab., 1963, no. 12, pp. 1455–1456.

  106. Beer, F., Effect of the Thickness of Sheet Material and Insulation Layers on the Induction and Loss in AC Magnetic Cores, Elektrie, 1964, vol. 18, no.3, pp. 83–86.

    Google Scholar 

  107. Vdovin, Yu.A., Kadochnikov, A.I., and Korobeinikova, I.E., On the Effect of Polythickness of Soft Magnetic Materials on Dynamic Hysteresis Loops of Cores, Avtomat. Telemekhan., 1971, no. 3, pp. 168–171.

  108. Kazadzhan, L.B., Molotilov, B.V., et al., Magnetic Properties of Electrical Steels of Various Thickness, Elektrotekhnika, 1975, no., 3, pp. 50–51.

  109. Boon, C.R. and Thompson, J.E., Hysteresis Loss in Rotating Magnetic Field in Silicon Iron Single Crystal, Proc. Inst. Electr., 1964, vol. 111, no.3, pp. 605–609.

    Google Scholar 

  110. Borisenko, V.G. and Zaidman, I.D., Effect of the Thickness of Cold-Rolled Transformer Steel Sheets on Specific Loss, Elektrichestvo, 1965, no. 11, pp. 81–82.

  111. Young, F.J. and Schenk, H.L., Magnetization Loss in Ellipsoid-Polarized Magnetic Field, J. Appl. Phys., 1966, vol. 37, no.3, pp. 1210–1211.

    Article  CAS  Google Scholar 

  112. Popova, V.P., Frequency Characteristics of Electrical Steels, Elektrichestvo, 1967, no. 5, pp. 75–78.

  113. Bryukhatov, N.L. and Grinchar, N.A., Effect of Crystallographic Texture in Electrical Steels on Magnetic Rotation Hysteresis Loss, Tr. MIIT, 1967, no. 245, pp. 117–124.

  114. Kapoor, A.K., A Review of Anomalous Magnetic Loss in Silicon Steel Sheets, J. Inst. Eng. (India) Elec. Eng. Liv., 1972, vol. 52, no.310, part 5, pp. 248–252.

    Google Scholar 

  115. Sharp, M.R.G. and Overshott, K.J., Effect of the Thickness on Loss in 3% Si Textured Steel, Proc. IEE, 1973, vol. 120, no.11, pp. 1451–1453.

    CAS  Google Scholar 

  116. Korzunin, G.S. and Inisheva, L.A., Rotation Hysteresis Loss in Electrical Steel, Fiz. Met. Metalloved., 1974, vol. 37, no.5, pp. 1119–1120.

    CAS  Google Scholar 

  117. Hubert, A., Heiniche, W., and Kranz, J., Surface Domain Structures in Sheet Goss Steel, Z. Agnew. Phys., 1965, vol. 19, no.6, pp. 521–529.

    CAS  Google Scholar 

  118. Dragoshanskii, Yu.N. and Shur, Ya.S., On the Formation of a Domain Structure in Silicon Iron Crystals, Fiz. Met. Metalloved., 1966, vol. 21, no.5, pp. 678–687.

    CAS  Google Scholar 

  119. Bishop, J.E.L., Magnetic Domain Structure and Loss in Transformer Steel with Cube-on-Edge Texture, Proc. Inst. Elect. Eng., 1970, vol. 117, no.11, pp. 2191–2193.

    Google Scholar 

  120. Overshott, K.J. and Thompson, J.E., Magnetic Properties of Textured Silicon Steel: 4. Loss Dependence on Domain Size, Grain Size, and Sheet Thickness, Proc. Inst. Elect. Eng., 1970, vol. 117, no.4, pp. 865–868.

    CAS  Google Scholar 

  121. Dragoshanskii, Yu.N., Khan, E.B., and Zaikova, V.A., Continuous Translational Movement of a Domain Structure in Alternating Fields and Its Influence on the Magnitude of Electromagnetic Loss in a Fe-3% Si Alloy, Fiz. Met. Metalloved., 1975, vol. 39, no.2, pp. 289–294.

    CAS  Google Scholar 

  122. Dragoshanskii, Yu.N., Zaikova, V.A., and Tiunov, V.F., Effect of 180° Domain Boundary Bend on Electromagnetic Loss in Silicon Iron Single Crystals, Fiz. Met. Metalloved., 1975, vol. 39, no.3, pp. 519–523.

    CAS  Google Scholar 

  123. Bishop, J.E.L., Calculation of Eddy-Current Loss in (110)[001] SiFe Layers in Cases of Asymmetrical Intersecting Wedge-Shaped Domain Boundaries, J. Phys. D: Appl. Phys., 1976, vol. 9, no.2, pp. 291–307.

    Article  CAS  Google Scholar 

  124. Zaikova, V.A., Startseva, I.E., and Philippov, B.N., Domennaya struktura i magnitnye svoistva elektrotekhnicheskikh stalei (Domain Structure and Magnetic Properties of Electrical Steels), Moscow: Nauka, 1992.

    Google Scholar 

  125. Fiorillo, F. and Rietto, A.M., Rotational and Alternating Energy Loss vs. Magnetizing Frequency in SiFe Laminations, J. Magn. Magn. Mater., 1990, vol. 83, pp. 402–404.

    Article  CAS  Google Scholar 

  126. Washko, S.D. and Miller, R.F., Sheet Thickness Effect on Energy Losses in 3% Silicon-Iron, J. Magn. Magn. Mater., 1980, vol. 19, pp. 361–364.

    CAS  Google Scholar 

  127. Tiunov, V.F., Effect of Crystallographic Orientation of Surface and of Thickness on Magnetic Loss and the Domain Structure of Fe-3% Si Crystals, Fiz. Met. Metalloved., 1990, no. 7, pp. 67–76.

  128. Tiunov, V.F., Zaikova, V.A., and Shur, Ya.S., Dynamics of 180-Degree Boundaries and Magnetic Loss in Fe-3% Si Crystals, Fiz. Met. Metalloved., 1979, vol. 47, no.3, pp. 538–547.

    CAS  Google Scholar 

  129. Zaikova, V.A. and Shur, Ya.S., Dependence of the Shape of the Magnetostriction Curves for Silicon Iron Crystals on the Changes in the Domain Structure during Magnetization, Fiz. Met. Metalloved., 1964, vol. 18, no.3, pp. 349–358.

    Google Scholar 

  130. Arohenhold, W.F., Sandham, H.F., and Thompson, J.E., Rotation Hysteresis Loss in Grain-Oriented Silicon-Iron, J. Appl. Phys., 1960, vol. 11, pp. 46–49.

    Google Scholar 

  131. Phy, R.H. and Bean, C.P., Calculation of the Energy Loss in Magnetic Sheet Material Using a Domain Model, J. Appl. Phys., 1958, vol. 29, pp. 532–534.

    Google Scholar 

  132. Dragoshanskii, Yu.N., Inisheva, L.A., Korzunin, G.S., and Khan, E.B., The Domain Structure and Electromagnetic Loss in Fe-3% Si Single Crystals in Rotating Magnetic Fields, Izv. Akad. Nauk SSSR, Ser. Fiz., 1979, vol. 43, no.7, pp. 1353–1358.

    CAS  Google Scholar 

  133. Kadochnikov, A.I. and Korzunin, G.S., The Generalized Domain Structure Parameter for Magnetically Soft Materials and Its Application for Quantitative Description of a Family of Dynamic Hysteresis Loops, Fiz. Tverd. Tela, 2000, vol. 42, no.11, pp. 2054–2059 [Phys. Solid State (Engl. Transl.), 2000, vol. 42, no. 11, p. 2116].

    Google Scholar 

  134. Korzunin, G.S., Chistyakov, V.K., and Rimshev, F.F., Developing Techniques for Testing Magnetic Properties of Electric Steels. I. Epstein's Apparatus (review article), Defektoskopiya, 2000, no. 11, pp. 7–26 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2000, vol. 36, no. 11, p. 782].

  135. Korzunin, G.S., Chistyakov, V.K., and Rimshev, F.F., Developing Techniques for Testing Magnetic Properties of Electric Steels. II. Variations in Magnetic Properties and Their Effect on Reliability of Testing Results (Review Article), Defektoskopiya, 2001, no. 4, pp. 3–30 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2001, vol. 37, no. 4, p. 239].

  136. Korzunin, G.S., Chistyakov, V.K., and Rimshev, F.F., Developing Techniques for Testing Magnetic Properties of Electric Steels. III. Apparatus for Sheet Steel (Review Article), Defektoskopiya, 2001, no. 6, pp. 42–71 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2001, vol. 37, no. 6, p. 397].

  137. Korzunin, G.S., Chistyakov, V.K., and Rimshev, F.F., Developing Techniques for Testing Magnetic Properties of Electric Steels. IV. Testing of Coiled Steel (Review Article), Defektoskopiya, 2002, no. 3, pp. 56–76 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2002, vol. 38, no. 3, p. 195].

  138. Epstein, J. Magnetishe Prufung von Eisenblech, Electrotechnische Z., 1900, vol. 21, pp. 303–307.

    Google Scholar 

  139. GOST (State Standard) 21427.1-83: Cold-Rolled Anisotropic Electrical Thin-Sheet Steel. Specifications, 1984.

  140. Epstein, J., Die magnetische Prufung von Eisenblech, ETZ, 1911, vol. 31, no.14, pp. 334–339.

    Google Scholar 

  141. Yaroshenko, Yu.N., Four-Line Epstein Apparatus, Izmerit. Tekhn., 1975, no. 7, pp. 73–75.

  142. Druzhinin, V.V. and Kozhurov, A.A., On the Inaccuracy of Loss Measurements by Differential Epstein-Lonkienz Apparatus, Zavod. Lab., 1956, no. 12, pp. 1460–1463.

  143. Semenova, N.A. and Al'tgausen, O.N., On the Technique of Measuring Magnetic Properties by Epstein Apparatus, Zavod. Lab., 1959, no. 12, pp. 1418–1420.

  144. Bulanova, A.I., Veksler, A.Z., Falaleeva, T.N., The Choice of Magnetic Path in Measuring the Magnetization Curve in Epstein Apparatus, Tr. Metrolog. Inst. SSSR. Issled. Obl. Magn. Izver., 1968, no. 93(153), pp. 73–79.

    Google Scholar 

  145. Rozhanovskii, I.M., Additions and Specifications to the Theory of Epstein Apparatus, Problemy tekhnicheskoi elektrodinamiki (Problems of Technical Electrodynamics), Kiev: Naukova Dumka, 1970, no. 23, pp. 100–106.

    Google Scholar 

  146. Veksler, A.Z. and Didik, Yu.I., Scientific and Engineering Foundations and Practical Utilization of Measurement Assurance of Facilities for Soft Magnetic Materials Quality Control, Metrologiya, 1977, no. 4, pp. 28–36.

  147. Vdovin, Yu.A., Veksler, A.Z., and Ishutina, U.S., Mezhdunarodnaya i natsional'naya standartizatsiya kontrolya elektromagnitnykh svoistv elektrotekhnicheskoi stali (International and National Standardization of Testing of Electromagnetic Properties of Electrical Steel), Moscow: Standartizatsiya: Gosstandart, 1984, no. 3.

    Google Scholar 

  148. Yanus, R.I., Per-Sheet Nonuniformity of Magnetic Properties of Electrical Iron, Fiz. Met. Metalloved., 1955, vol. 1, no.1, pp. 84–91.

    Google Scholar 

  149. Yanus, R.I., Methods for Testing Magnetic Properties of Sheet Electrical Iron, Tr. Inst. Fiz. Met. Ural. Filial Akad. Nauk SSSR, 1958, no. 20, pp. 141–145.

  150. Druzhinin, V.V. and Kazadzhan, L.B., Comparison of Magnetic Parameters of Electrical Steel Measured on Entire Sheets and Epstein Strips, Fiz. Met. Metalloved., 1962, vol. 13, no.4, pp. 639–640.

    CAS  Google Scholar 

  151. Atoyan, V.V., Vdovin, Yu.A., Korobeinikova, I.E., Muradyan, N.S., and Oganyan, L.O., Studying Systematic Inaccuracy of Wattmeter Setup for Measuring Specific Loss in Electrical-Steel Ribbons, Defektoskopiya, 1978, no. 10, pp. 15–23.

  152. Yanus, R.I., Vdovin, Yu.A., Methods and Apparatus for Nondestructive Testing of Electrical Steel, Izmer. Tekhn., 1961, no. 12, pp. 37–40.

  153. Vdovin, Yu.A. and Korobeinikova, I.E., Reliability of Testing Electromagnetic Properties of Electrical Steel, Izv. Akad. Nauk SSSR, Ser. Fiz., 1975, vol. 39, no.7, pp. 1558–1560.

    Google Scholar 

  154. GOST (State Standard) 21427.1-95: Cold-Rolled Anisotropic Electrical-Sheet Steel. Specifications, 1995.

  155. Vdovin, Yu.A. and Yaroshenko, Yu.N., Per-Sheet Nonuniformity of Magnetic Properties of Cold-Rolled Electrical Iron, Tr. Inst. Fiz. Met. Ural. Fil. Akad. Nauk SSSR, 1958, no. 22, pp. 137–139.

  156. Vdovin, Yu.A. and Yaroshenko, Yu.N., Experience of Sorting Cold-Rolled Sheet Steel by Magnetic Properties, Vestn. Elektropromyshl., 1961, no. 1, pp. 38–41.

  157. Atoyan, V.V., Vdovin, Yu.A., Korobeinkova, I.E., and Oganyan, L.O., Studyingthe Nonuniformity of Specific Loss of Cold-Rolled Transformer Steel, Tr. Vsesoyuz. Nauchn.-Issled. Proektno-konstrut. Inst. Kompleks. Elektrooborud., 1978, no. 10, pp. 164–174.

  158. Vdovin, Yu.A., Methods of Studying and Production-Line Testing Magnetic Induction of Cold-Rolled Electrical Iron Sheets and Coils, Cand. Sci. Dissertation, Sverdlovsk: Inst. Metal Physics, Acad. Sci. USSR, 1963.

    Google Scholar 

  159. Vdovin, Yu.A. and Korzunin, G.S., On the Heterogeneity of Magnetic Properties of Electrical Steel in Weak Fields, Tr. Inst. Fiz. Met. Akad. Nauk SSSR, 1965, no. 24, pp. 78–82.

  160. Korzunin, G.S. and Fel'dblyum, Ya.M., Per-Sheet Heterogeneity of Magnetic Induction in Electrical Steel in Weak Fields, Elektrotekhnika, 1968, no. 6, pp. 41–43.

  161. Korzunin, G.S., Studying the Heterogeneity of Magnetic Properties and Production-Line Testing of Cold-Rolled Electrical Steel, Cand. Sci. Dissertation, Sverdlovsk: Inst. Metal Physics, Acad. Sci. USSR, 1966.

    Google Scholar 

  162. Kifer, I.I., Ispytaniya ferromagnitnykh materialov (Testing Ferromagnetic Materials), Moscow: Energya, 1969.

    Google Scholar 

  163. Vlasov, V.F., A Device for Measuring Loss, Vestn. Metallopromyshl., 1992, no. 12, pp. 134–156.

  164. Sokolov, A.D. and Yanus, R.I., Apparatus for Measuring Electromagnetic Parameters of Entire Sheets of Dynamo and Transformer Iron, Fiz. Met. Metalloved., 1955, vol. 1, no.1, pp. 110–117.

    Google Scholar 

  165. Druzhinin, V.V., Measuring Specific Loss and Magnetic Induction by GOST 802-58 on Entire and Half-Entire Sheets, Tr. VNIIM, Moscow: Sdandartgiz, 1962, no. 64(124), pp. 81–84.

    Google Scholar 

  166. Yanus, R.I., Fridman, L.A., and Drozhzhina, V.I., Prompt Method for Testing the Coercive Force of Sheet Electrical Steel, Zavod. Lab., 1955, no. 10, pp. 1193–1195.

  167. Yanus, R.I., Kubarev, V.V., Vdovin, Yu.A., and Kolpakov, I.P., Automatic Device for Sorting Out Sheets of Electrical Steel, Zavod. Lab., 1955, vol. 25, no.4, pp. 480–481.

    Google Scholar 

  168. Gaukhshtein, V.V. and Leshchiner, M.M., A Device for Automated Measuring of the Magnetic Induction in Electrical Steel Sheets, Zavod. Lab., 1966, vol. 32, no.5, pp. 622–624.

    Google Scholar 

  169. Atoyan, V.A. and Khachatryan, P.O., A Device for Prompt Measurements of Magnetic Parameters of Entire Electrical Steel Sheets, in Issledovanie skhem i apparatury dlya magnitnykh i elektricheskikh izmerenii (Circuits and Instruments for Magnetic and Electrical Measurements), Kiev: Naukova Dumka, 1964, pp. 84–88.

    Google Scholar 

  170. Atoyan, V.A., Development and Investigation of Devices for Prompt Tests and Estimation of Magnetic Properties of Electrical Steels, Cand. Sci. Dissertation, Kiev: Inst. of Electrodynamics, Acad. Sci. USSR, 1966.

    Google Scholar 

  171. Edmundson, D., Electrical and Magnetical Measurement in Electrical Engineering Factory, Proc. Inst. Electr. Eng., 1955, vol. 108, no.4, pp. 427–441; 1957, no. 13, pp. 69–71.

    Google Scholar 

  172. Winter, A. and Gabler, J., Gerat zur Sortierung von Transformatorblechen, Technik (Berlin), 1955, no. 7, pp. 419–420.

  173. Krug, W., Meßgenauigkeit und Zeistungs tahigkeit einer Ganztafel-Meß-und Sortieranlage fur Elektrobleche, ETZ-A, 1957, vol. 78, no.22, pp. 829–833.

    Google Scholar 

  174. Gerhardt, P. and Lange, H., Bestimmung von ummagnetiesierung verlsten an gansen Blechtafeln, ETZ-A, 1956, vol. 77, no.17, pp. 17–21.

    Google Scholar 

  175. Wollweber, G., Ermitting von ummagnetisierungsverlusten an Elektroble-chen mit einem Ganztafel-Meßgerat, Arch. Eisenuhttenwesen, 1957, no. 7, pp. 397–401.

  176. Vdovin, Yu.A., Apparatuses for Nondestructive Testing of Electrical Steel: A Review, Vestn. Elektropromyshl., 1958, no. 7, pp. 28–32.

  177. Yamamoto, T. and Ohya, Y., Single Sheet Tester for Measuring Core Losses and Permeabilities in Silicon Steel Sheet, IEEE Trans. Magn., 1974, vol. MAG-10, p. 157.

    Google Scholar 

  178. Vdovin, Yu.F. and Popov, E.I. Producing a Sinusoidal Induction Flux in a Ferromagnet Sample Using a Follow-Up System. Research in the Field of Theoretical and Applied Magnetism, Tr. Inst. Fiz. Met. Akad. Nauk SSSR, 1967, no. 26, pp. 111–117.

  179. Seleznev, Yu.V. and Piskunov, R.K., Obtaining Specified Magnetization Regimes for Ferromagnetic Samples, Izv. Vyssh. Uchebn. Zaved., Priborostr., 1975, no. 12, pp. 37–43.

  180. Maslov, Yu.N., Pisarenko, V.Ya., Tulepov, K.M., and Chernokoz, A.Ya., A Device for Creating Specified Magnetization Regimes for Ferromagnetic Samples, USSR Inventor's Certificate no. 675380, Byull. Izobret., 1979, no. 27.

  181. Seleznev, Yu.V., Kondrat'ev, I.T., and Novikov, V.K., A Device for Producing a Specified Form of Magnetic Field Induction in a Ferromagnet Sample, USSR Inventor's Certificate no. 771583, Byull. Izobret., 1980, no. 38.

  182. Seleznev, Yu.V., Movenko, B.F., and Muzyukin, B.P., A Setup for Creating Sinusoidal Induction and Strength of a Magnetic Field in Ferromagnet Samples, Tr. Vladimir. Politekh. Inst., 1972, no. 23, pp. 38–42.

  183. Novikov, V.K. and Krokhin, V.V., Iteration Methods of Producing Specified Magnetizing Regimes for Magnetic Materials, Izmerit. Tekhn., 1993, no. 4, pp. 58–60.

  184. Atoyan, V.V., Vdovin, Yu.A., Korobeinikova, I.E., Oganyan, L.O., and Siventsev, A.A., Investigation of Nonexcluded Systematic and Random Errors of a Wattmeter Device for Measuring Specific Losses in Electrical Steel Sheets, Defektoskopiya, 1979, no. 6, pp. 34–39.

  185. Atoyan, V.V., Vdovin, Yu.A., Korobeinikova, I.E., and Oganyan, L.O., Calibration of a Wattmeter Device with a Sheet Apparatus for Measuring Specific Magnetic Losses in Electrical Steel, Elektrotekh. Promyshl. Elektrotekh. Mater., 1981, no. 2(127), pp. 16–18.

    Google Scholar 

  186. GOST (State Standard) 12119-98: Electrical Steel. Methods for Testing Magnetic and Electrical Properties, 1999.

  187. Magnetic Materials. Part 3. Method of Measurement of the Magnetic Properties of Magnetic Sheet and Strip by Means of Single Sheet Tester, IEC Publication 404-3, 1992.

  188. Novikov, V.K. and Moiseenko, V.V., Automated Magnetomeasuring Complex for Testing Electrical Steels, Izmerit. Tekh., 1989, no. 6, pp. 44–45.

  189. Novikov, V.K., Methods and State-of-the-Art Instruments for Testing Magnetic Properties of Electrical Steels and Alloys, Doctoral Sci. Dissertation, Moscow: Moscow Energy Inst., 1993.

    Google Scholar 

  190. Sievert, J.D. and Ahlers, H., Is the Epstein Frame Replaceable? SMM-9 Conference, Madrid: 1989, P.N. 2.01.

  191. Korobeinikova, I.E., Chistyakov, V.K., and Pervukhina, G.A., Metrological Characteristics of Magnetic Field in the Solenoid of a Sheet Device for Testing Magnetic Properties of Electrical Steel, Zavod. Lab., 1992, no. 6, pp. 67–69.

  192. Korobeinikova, I.E., Chistyakov, V.K., Pervukhina, G.A., and Ryzhkova E.N., Measuring Magnetic Induction Using Sheet Devices, Zavod. Lab., 1986, no. 11, pp. 88–90.

  193. Korobeinikova, I.E., Chistyakov, V.K., and Pervukhina, G.A., Inaccuracy in the Determination of the Length of the Magnetic Line in Measuring the Magnetic Induction of Electrical Steel by a Sheet Device, Zavod. Lab., 1988, no. 7, pp. 115–117.

  194. Korobeinikova, I.E., Chistyakov, V.K., and Pervukhina, G.A., Nonexcluded Systematic Errors in Measurement of the Magnetic Induction of Electrical Steel by a Sheet Device, Zavod. Lab., 1991, no. 5, pp. 67–68.

  195. Korobeinikova, I.E., Chistyakov, V.K., and Solov'eva, S.N., Random Errors in Measuring the Magnetic Induction of Electrical Steel Using Sheet Device, Zavod. Lab., 1990, no. 3, pp. 102–104.

  196. Korobeinikova, I.E. and Chistyakov, V.K., Nonexcluded Systematic Inaccuracy of Measuring Magnetic Losses in Electrical Steel Using a Sheet Device, Zavod. Lab., 1993, no. 5, pp. 54–57.

  197. Chistyakov, V.K., Korobeinikova, I.E., Korobka, O.B., Mints, B.B., and Konstruleva, I.S., MEC Sheet Devices for Testing Specific Magnetic Losses in Electrical Steel, Zavod. Lab., 1985, no. 6, pp. 91–94.

  198. Ahlers, H., Sievert, J.D., and Qu-ch, Qu, Comparison of Single Sheet Tester and Epstein Frame Measurements, J. Magn. Magn. Mater., 1982, vol. 26, pp. 176–178.

    Article  Google Scholar 

  199. Didik, Yu.I., Korzunin, G.S., and Malyuk, V.P., Metrological Support of Measurements of Magnetic Losses in Magnetically Soft Materials in the Sinusoidal Magnetization Regime, Defektoskopiya, 2003, no. 5, pp. 68–76 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2003, vol. 39, no. 5, p. 387].

  200. Korzunin, G.S., Magnitnye metody opredeleniya kristallograficheskoi tekstury (Magnetic Methods for Determining Crystallographic Texture), Ekaterinburg: Ural. Otd. Ross. Akad. Nauk, 1995.

    Google Scholar 

  201. Korzunin, G.S. and Vaulina, G.Yu., Methods and Means for Nondestructive Testing of Magnetic Anisotropy in Sheet Ferromagnetic Materials, Defektoskopiya, 1994, no. 8, pp. 3–30.

  202. Kudryavtsev, I.P., Tekstury v metallakh i splavakh (Textures in Metals and Alloys), Moscow: Metallurgiya, 1965.

    Google Scholar 

  203. Wassermann, G. and Grewen, J., Texturen metallischer Werkstoffe, Berlin: Springer, 1962. Translated under the title Tekstury metallicheskikh materialov, Moscow: Metallurgiya, 1969.

    Google Scholar 

  204. Mekhontsev, Yu.Ya., Magnetoelastic Transducers for Studying Residual Stresses, Ostatochnye napryazheniya v zagotovkakh i detalyakh krupnykh mashin (Residual Stresses in Blanks and Parts of Large Machinery) Sverdlovsk: NIITyazhMash Uralmashzavoda, 1971, pp. 9–11.

    Google Scholar 

  205. Korzunin, G.S. and Vaulina, G.Yu., A Technique for Flaw Detection in Sheet Ferromagnetic Materials, USSR Inventor's Certificate no. 1206675, Byull. Izobret., 1986, no. 3, p. 168.

  206. Korzunin, G.S. and Vaulina, G.Yu., Investigation of the Topography of a Magnetic Field above the Surface of Anisotropic Sheet Metal, Defektoskopiya, 1987, no. 3, pp. 9–17.

  207. Litvinenko, A.A., Vaulina, G.Yu., Korzunin, G.S., and Litvinenko, L.A., Magnetic Powder Method for Determining the Magnetic Anisotropy of Sheet Steels, Defektoskopiya, 1994, no. 3, pp. 10–20.

  208. Pechenkov, A.N. and Shcherbinin, V.E., Stray Field of a Thin Anisotropic Disc, Defektoskopiya, 1997, no. 9, pp. 10–18.

  209. Dyakin, V.V., Korzunin, G.S., Litvinenko, L.A., and Kaibicheva, S.L., Magnetic-Powder Inspection of the Crystallographic Texture of Electrical Steel, Defektoskopiya, 2004, no. 5, pp. 63–78 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2004, vol. 40, no. 5, p. 333].

  210. Akulov, A.N. and Branovitskii, I.I., The Domain Structure of Ferromagnets, Dokl. Akad. Nauk Belurus SSR, 1968, vol. 12, pp. 1077–1080.

    Google Scholar 

  211. Korzunin, G.S. and Litvinenko, L.A., On the Possibility of Determining Mechanical Stresses by the Magnetic-Powder Method, Defektoskopiya, 1997, no. 11, pp. 40–46.

  212. Pashagin, A.I., Rydzevskii, S.I., and Shcherbinin, V.E., Magnetic Flaw Detector, RF Patent no. 2171984, 2001.

  213. Korzunin, G.S., Litvinenko, L.A., Pashagin, A.I., Sysolyatina, I.P., and Chistyakov, V.K., Prompt Technique for Determining the Easy Direction in Individual Grains of Coarse-Grained Ferromagnetic Materials, Trudy II Baikal'skoi mezhdunarodnoi konferentsii “Magnitnye Materialy” BICMM-2003 (Proc. of II Baikal Inter. Conf. “Magnetic Materials” (BICMM-2003)), Irkutsk: 2003, pp. 64–65.

  214. Korzunin, G.S., Chistyakov, V.K., and Sysolyatina, I.P., Particular Features of Testing the Quality of Coarse-Grained Anisotropic Cold-Rolled Electrical Steel Caused by Heterogeneity of Crystallographic Texture, Defektoskopiya, 1999, no. 11, pp. 38–44.

  215. Vorob'ev, G.M., Grechnyi, Ya.V., and Kotova, L.I., Effect of Texture Perfection and Grain Size on Magnetic and Electrical Properties of Transformer Steel, Stal', 1965, no. 1, pp. 67–71.

  216. Zaikova, V.A., Filippov, B.N., and Shur, Ya.S., The Domain Structure and Electromagnetic Losses in Transformer Steel, Struktura i svoistva elektrotekhnicheskoi stali (Structure and Properties of Electrical Steel), Sverdlovsk: Inst. Fiz. Met. Ural. Nauch. Tsentr Akad. Nauk SSSR, 1977, no. 33, pp. 4–16.

    Google Scholar 

  217. Korzunin, G.S., Chistyakov, V.K., and Pyatygin, A.I., The Inspection of Crystallographic Texture in a Moving Band of Anisotropic Electrical Steel, Defektoskopiya, 1981, no. 2, pp. 28–37.

  218. Druzhinin, V.V., Malygin, M.A., and Chistyakov, V.K., The Dependence of Eddy-Current Losses on the Magnetic Texture in Cold-Rolled Transformer Steel, Fiz. Met. Metalloved., 1972, vol. 33, no.2, pp. 449.

    Google Scholar 

  219. Puzhevich, R.B., Borisenko, V.G., and Shvartsman, L.A., Current Line of Investigations for Producing Efficient Coatings on Anisotropic Electrical Steel, Chern. Metal. Byull. NTI, 1986, no. 7(1011), pp. 2–10.

    Google Scholar 

  220. Zhakov, S.V. and Filippov, B.N., Effect of Coatings on the Domain Structure of Highly Textured Electrical Steel, Izv. Akad. Nauk SSSR, Ser. Fiz., 1982, vol. 46, no.4, pp. 655–659.

    Google Scholar 

  221. Khanzhina, T.A., Bamburov, V.G., Dragoshanskii, Yu.N., et al., A Solution for Covering Steels with Insulation Coatings and the Method for Its Production, USSR Inventor's Certificate no. 1608243, Byull. Izobret., 1990, no. 43.

  222. Korzunin, G.S., Chistyakov, V.K., Dragoshanskii, Yu.N., Rimshev, F.F., and Sysolyatina, I.P., Effect of Electrically Insulating Coatings on Anisotropy of Magnetic Characteristics of Textured Transformer Steels, Defektoskopiya, 2000, no. 8, pp. 34–46 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2000, vol. 36, no. 8, p. 564].

  223. Korzunin, G.S., Sysolyatina, I.P., and Chistyakov, V.K., Effect of the Distribution of Chemical Elements in Isulating Coatings and Surface Layers of Electrical Sheet Steel on Its Magnetic Properties, Fiz. Met. Metalloved., 2003, vol. 95, no.6, pp. 39–45 [Phys. Met. Metallogr. (Engl. Transl.), 2003, vol. 95, pp. 544–550].

    CAS  Google Scholar 

  224. Kagan, V.G., Puzhevich, R.B., Sysolyatina, I.P., et al., Testing the Quality of Insulating Coatings in Electrical Steel Production, Kontrol'. Diagnostika, 2004, no. 8(74), pp. 40–48.

    Google Scholar 

  225. Sato, T., Kuroki, K., and Tanaka, O., Approaches to the Lowest Core Loss in Grain-Oriented 3% Silicon Steel with High Permeability, IEEE Trans. Magn., 1978, vol. 14, no.5, pp. 350–352.

    Article  Google Scholar 

  226. Dragoshanskii, Yu.N. and Sheiko, L.M., Effect of In-Plane Tensions on the Domain Structure and Magnetic Properties of Silicon Iron, Izv. Akad. Nauk SSSR, Ser. Fiz., 1985, vol. 49, no.8, pp. 1568–1572.

    CAS  Google Scholar 

  227. Drozhzhina, V.I., Yanus, R.I., and Vershinina, V.A., On the Effect of Plastic Deformation on Oscillation and Rotational Magnetic Hysteresis in Dynamo Iron, Izv. Akad. Nauk SSSR, Ser. Fiz., 1952, vol. 16, no.10, pp. 1200–1204.

    Google Scholar 

  228. Korzunin, G.S. and Inisheva, L.A., Rotational Hysteresis Loss in Electrical Steel, Fiz. Met. Metalloved., 1974, vol. 37, no.5, pp. 1119–1120.

    CAS  Google Scholar 

  229. Korzunin, G.S. and Inisheva, L.A., Energy Loss in Electrical Steel upon Rotational Magnetization Reversal, Elektrotekhnika, 1981, no. 12, pp. 10–12.

  230. Vtyurin, N.I., Temperature Dependence of Hysteresis Losses in Rotating Magnetic Fields, Izv. Akad. Nauk SSSR, Ser. Fiz., 1952, vol. 16, no.6, pp. 690–694.

    Google Scholar 

  231. Abramov, A.D., Eddy-Current Losses in Rotating Magnetc Fields, Izv. Vyssh. Uchebn. Zaved., Fiz., 1971, no. 1, pp. 38–43.

  232. Kornetzki, M. and Lucas, J., Zur Theorie der Hyslereseverluste im magnetishenDrehfeld, Z. Phys., 1955, vol. 142, pp. 70–82.

    Google Scholar 

  233. Kapoor, A.K., Total Iron Losses under Combined Alternating and Rotating Fields, J. Inst. Eng. (India) Elect. Eng. Div., 1971, no. 12, part 6, pp. 372–377.

  234. Korzunin, G.S. and Lyapunov, V.V., Measuring Rotational Hysteresis Losses upon Continuing Rotation of Ferromagnetic Discs, Tr. Inst. Fiz. Met. Akad. Nauk SSSR, 1967, no. 26, pp. 103–106.

  235. Abramov, A.D., Korzunin, G.S., and Tkachenko, G.I., A Device for Measuring Rotational-Magnetization-Reversal-Induced Energy Losses in Ferromagnetic Materials, USSR Inventor's Certificate no. 706803, Byull. Izobret., 1979, no. 48.

  236. Abramov, A.D., Korzunin, G.S., Inisheva, L.A., and Tkachenko, G.I., A Device for Measuring Rotational Remagnetization Energy Losses in Ferromagnetic Specimens, USSR Inventor's Certificate no. 954908, Byull. Izobret., 1982, no. 32.

  237. Khimin, Yu.A., Min'kov, R.V., Denisov, G.G., Urman, Yu.M., and Vyatkin, V.A., A Device for Measuring Rotational Hysteresis, Prib. Tekh. Eksper., 1976, no. 6, pp. 170–172.

  238. Korzunin, G.S. and Tiunov, V.F., A Technique for Measuring Energy Losses upon Rotational Magnetization Reversal of Ferromagnetic Materials, Defektoskopiya, 1995, no. 12, pp. 38–40.

  239. Tiunov, V.F., Korzunin, G.S., and Korobeinikov, A.Yu., An Apparatus for Generating a Rotating Magnetic Field in Immobile Ferromagnetic Samples and Observing Their Domain Structure, Defektoskopiya, 1996, no. 9, pp. 19–22.

  240. Tiunov, V.F. and Korzunin, G.S., Instrument for Measuring Curves of Dynamic Magnetization in Samples of Electric Steels in Rotating Magnetic Fields, Defektoskopiya, 2002, no. 11, pp. 37–40 [Rus. J. of Nondestructive Testing (Engl. Transl.), 2002, vol. 38, no. 11, p. 823].

  241. Dambaev, M.S. and Turpanov, I.A., The Domain Structure of Silicon Iron in a Rotating Magnetic Field, Fiz. Magn. Plenok, Ulan Ude, Sib. Otd. Akad. Nauk SSSR, 1974, no. 6, pp. 172–175.

  242. Dragoshanskii, Yu.N., Inisheva, L.A., Korzunin, G.S., and Khan, E.B., The Domain Structure and Electromagnetic Loss in Fe-3% Si Single Crystals in Rotating Magnetic Fields, Izv. Akad. Nauk SSSR, Ser. Fiz., 1979, vol. 43, no.7, pp. 1353–1358.

    CAS  Google Scholar 

  243. Tiunov, V.F., Korzunin, G.S., and Inisheva, L.A., Dynamic Behavior of the Domain Structure and Magnetic Losses in Fe-3% Si Crystals in Rotating Magnetic Fields, Fiz. Met. Metalloved., 1989, vol. 68, no.4, pp. 687–696.

    CAS  Google Scholar 

  244. Tiunov, V.F. and Korzunin, G.S., Effect of the Sizes of Fe-3%Si Single Crystals on the Dynamic Behavior of Their Domain Structure and Rotational Magnetization-Reversal Loss, Fiz. Met. Metalloved., 1999, vol. 88, no.2, pp. 76–80 [Phys. Met. Metallogr. (Engl. Transl.), 1999, vol. 88, no. 2, pp. 174–178].

    CAS  Google Scholar 

  245. Tiunov, V.F., Features of the Dynamic Behavior of 180° Domain Structure and Magnetic Losses in Fe-3% Si Single Crystals in Rotating Magneitc Fields, Fiz. Met. Metalloved., 2001, vol. 92, no.1, pp. 20–28 [Phys. Met. Metallogr. (Engl. Transl.), 2001, vol. 92, pp. 16–24].

    CAS  Google Scholar 

  246. Sievert, J. On Measurement of the Magnetic Properties of Electrical Sheet Steel under Rotation Magnetization, J. Magn. Magn. Mater., 1992, vol. 112, nos.1–3, pp. 50–57.

    Google Scholar 

  247. Korzunin, G.S., Inisheva, L.A., Tiunov, V.F., Abramov, A.D., and Tkachenko, G.I., Methods and Means for Measuring Magnetic Losses upon Rotational Magnetization Reversal of Ferromagnetic Materials, Defektoskopiya, 1994, no. 11, pp. 3–24.

  248. Brailsford, F., Alternating Hysteresis Loss in Electrical Sheet Steel, J. Inst. Elect. Eng., 1939, vol. 84, pp. 399–407.

    Google Scholar 

  249. Boon, C.R. and Thompson, J., Rotational Hysteresis Loss in Single Crystal Silicon-Iron, Proc. IEEE, 1964, vol. 111, no.3, pp. 605–609.

    Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Institute of Metal Physics, Ural Division, Russian Academy of Sciences, ul. Sofii Kovalevskoi 18, Yekaterinburg, 620219, Russia

    G. S. Korzunin

Authors
  1. G. S. Korzunin
    View author publications

    You can also search for this author in PubMed Google Scholar

Additional information

Devoted to the Centenary of the Birth of M.N. Mikheev

__________

Translated from Defektoskopiya, Vol. 41, No. 10, 2005, pp. 23–57.

Original Russian Text Copyright © 2005 by Korzunin.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Korzunin, G.S. The Modern Status of Inspection of Certain Magnetic Characteristics of Anisotropic Electrical Steel (Review). Russ J Nondestruct Test 41, 640–665 (2005). https://doi.org/10.1007/s11181-006-0015-6

Download citation

  • Received:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11181-006-0015-6

Keywords

Search

Navigation